Dish TV aerialBox T2200 Official Discussion

Forums › Freeview (DVB-T/DVB-S) › Dish TV aerialBox T2200 Official Discussion

1 | ... | 88 | 89 | 90 | 91 | 92 | 93 | 94 | 95 | 96 | 97

65 posts

Master Geek

#2008903 6-May-2018 20:10

Suckerpunch:
need2noy:

Today I went to watch something on tvnz on demand through my Dishtv/T2200 and cannot get it. It says the Webpage is not available and it is Error 52: Server returned nothing (No headers, no data) and gave suggestions such as :

reload this webpage later

Check your internet connection

Restart any router, modem

I have done the last 2 points and everything is ok, and still have the Error 52 message, but I tried to reload the webpage and I can highlight it by using arrow keys on remote but nothing happens, when highlighted I press ok and still nothing happens.

Is anybody else experiencing this problem? Last week I had no problems watching tv on demand. So when I press apps on remote control all I get now is the Error 52 message.

Yes I'm experiencing the same problem today. Can't loads the apps. Getting a webpage error.

Yes, i think it is widespread. aerialbox's website dishtv.co.nz is also not working at the moment.

saenglish

65 posts

Master Geek

#2008945 6-May-2018 23:05

They had the same problem in the middle of April, on reading dishtvnz's facebook page

Elgin

43 posts

Geek

#2008986 7-May-2018 08:42

We are currently testing software for this issue and hope to have a release version as soon as possible, I will check with the software team and see if we can provide test software for those willing to try it in the mean time.

I would be happy to help with beta testing any new release.

DishTV

27 posts

Geek

Trusted

DishTV

#2009250 7-May-2018 14:37

need2noy:

Today I went to watch something on tvnz on demand through my Dishtv/T2200 and cannot get it. It says the Webpage is not available and it is Error 52: Server returned nothing (No headers, no data) and gave suggestions such as :

reload this webpage later
Check your internet connection
Restart any router, modem
I have done the last 2 points and everything is ok, and still have the Error 52 message, but I tried to reload the webpage and I can highlight it by using arrow keys on remote but nothing happens, when highlighted I press ok and still nothing happens.

Is anybody else experiencing this problem? Last week I had no problems watching tv on demand. So when I press apps on remote control all I get now is the Error 52 message.

The apps portal is all up and running again now, if this ever happens again you can also launch apps from the Freeview EPG using the Green button on the remote.

Dish TV Technologies Ltd

DishTV

27 posts

Geek

Trusted

DishTV

#2009253 7-May-2018 14:39

Elgin:

We are currently testing software for this issue and hope to have a release version as soon as possible, I will check with the software team and see if we can provide test software for those willing to try it in the mean time.

I would be happy to help with beta testing any new release.

Here is a link to the latest test software http://www.dishtv.co.nz/image/catalog/Firmware/DIS007_10_0141_01_USB.usb please let us know how you go testing this.

This software has the fixes for the Audio modes on the T2200. All modes should work now for both On Demand and Live TV.

Dish TV Technologies Ltd

Elgin

43 posts

Geek

#2015066 13-May-2018 12:08

DishTV:

Here is a link to the latest test software http://www.dishtv.co.nz/image/catalog/Firmware/DIS007_10_0141_01_USB.usb please let us know how you go testing this.

This software has the fixes for the Audio modes on the T2200. All modes should work now for both On Demand and Live TV.

I have tested this beta version and it does not work as intended. PCM stereo is output regardless of the audio setting. Even when set to AC3 the HDMI audio output is PCM stereo not Dolby digital (on the broadcast channels that support it).

This does mean that the on demand audio works without having to change the audio settings, but we have lost Dolby digital out when AC3 is selected for Live TV.

DishTV

27 posts

Geek

Trusted

DishTV

#2016296 15-May-2018 14:01

Elgin:

DishTV:

Here is a link to the latest test software http://www.dishtv.co.nz/image/catalog/Firmware/DIS007_10_0141_01_USB.usb please let us know how you go testing this.

This software has the fixes for the Audio modes on the T2200. All modes should work now for both On Demand and Live TV.

I have tested this beta version and it does not work as intended. PCM stereo is output regardless of the audio setting. Even when set to AC3 the HDMI audio output is PCM stereo not Dolby digital (on the broadcast channels that support it).

This does mean that the on demand audio works without having to change the audio settings, but we have lost Dolby digital out when AC3 is selected for Live TV.

Hi, Thank you for trying this, please ensure the software did not revert back to previous release which can happen when connected to network. Check version under Menu - Installation - System Info.

If the software did revert back to release version please try the following instructions.

To stop the T2200 from doing Network update, you can Change the Update URL to stop this.

First go to Menu - Manual Update - Schedule Update type in your model Number 2200 and the box "OND Server URL" will appear press "OK" to edit. delete the last letter from the end of the URL and save.

Once you have done this repeat the update via USB and it will not try update again.

Dish TV Technologies Ltd

Equinox IT

Cloud spending continues to surge globally, but most organisations haven’t made the changes necessary to maximise the value and cost-efficiency benefits of their cloud investments. Download the whitepaper From Overspend to Advantage now.

Elgin

43 posts

Geek

#2016443 15-May-2018 17:56

DishTV:

Hi, Thank you for trying this, please ensure the software did not revert back to previous release which can happen when connected to network. Check version under Menu - Installation - System Info.

The software did not revert to the previous version during my testing. I installed version 1.40 manually (via USB) once my testing of the beta version was complete because I wanted to restore the Dolby audio output functionality.

Let me know when you have another version ready for testing.

Morgenmuffel

631 posts

Ultimate Geek

Lifetime subscriber

#2061096 23-Jul-2018 16:13

Does anyone know if this has been updated to use the new freeview app?

As I am thinking of digging this out and trying to get it working again

'We love to buy books because we believe we’re buying the time to read them.' WARREN ZEVON

DishTV

27 posts

Geek

Trusted

DishTV

#2061452 24-Jul-2018 08:13

Morgenmuffel:

Does anyone know if this has been updated to use the new freeview app?

As I am thinking of digging this out and trying to get it working again

Hi, The T2200 has not yet received the On Demand Service, Freeview is rolling the new service out to all devices in stages. Once Freeview has made the service available on the T2200 it will automatically become available.

Dish TV Technologies Ltd

robfish

683 posts

Ultimate Geek

Lifetime subscriber

#2061487 24-Jul-2018 08:49

Can you please let us know here when is is available (and I might get my Dish TV off the shelf too)

Rob

DishTV

27 posts

Geek

Trusted

DishTV

#2074728 17-Aug-2018 09:57

Hi, the T2200 has received the On Demand service update, if you have not see the update please try power your T2200 off then back on again.

Regards Justin

Dish TV Technologies Ltd

GregV

928 posts

Ultimate Geek

#2074835 17-Aug-2018 13:17

Just restarted/updated. The difference from the old Freeview OnDemand to this is night and day! Vast improvement

Smithy47

231 posts

Master Geek

ID Verified

Trusted

Lifetime subscriber

#2074947 17-Aug-2018 17:27

Found that you need to pull the power to force the reboot, otherwise it will not do the update it.

Smithy

GregV

928 posts

Ultimate Geek

#2074989 17-Aug-2018 19:39

I just made sure "LPM in standby" (settings/admin menu) was set to ON, then used the remote button to turn unit off and then on. That was enough to trigger the update.

1 | ... | 88 | 89 | 90 | 91 | 92 | 93 | 94 | 95 | 96 | 97