Hardiglaze Swirl White

Forums › Home Workshop DIY › Hardiglaze Swirl White

ADKM

860 posts

Ultimate Geek

#127079 29-Jul-2013 14:05

Does anyone know wwere I could get a 95x105 or larger sheet of this. I need to replace an inwall cistern and the cut out size for the push panel is much smaller.

Many thanks.

Cheers - Kirk

mattwnz

20145 posts

Uber Geek

#867861 29-Jul-2013 14:24

Plumbers often have offcuts that they keep for when they need to patch things.

ADKM

860 posts

Ultimate Geek

#867946 29-Jul-2013 16:07

Our plumber is also looking... here's hoping!

Cheers - Kirk

Disrespective

1925 posts

Uber Geek

#868333 30-Jul-2013 09:36

Why don't you just head down to Mitre10/Bunnings and get a sheet? If they don't have it in stock they'll be able to get it.

They should even be able to cut it down for you at a small nominal cost.

nickb800

2715 posts

Uber Geek

Trusted

#868343 30-Jul-2013 09:51

What about your local building recyclers?

ADKM

860 posts

Ultimate Geek

#868459 30-Jul-2013 13:02

Disrespective: Why don't you just head down to Mitre10/Bunnings and get a sheet? If they don't have it in stock they'll be able to get it.

James Hardy no longer make it and none is available from the usual places. 2nd hand or old stock only, hence asking here... and yes still hunting all over although not many recyclers demo yards etc. in Dunedin.

Disrespective

1925 posts

Uber Geek

#868747 30-Jul-2013 17:22

ADKM:
Disrespective: Why don't you just head down to Mitre10/Bunnings and get a sheet? If they don't have it in stock they'll be able to get it.

James Hardy no longer make it and none is available from the usual places. 2nd hand or old stock only, hence asking here... and yes still hunting all over although not many recyclers demo yards etc. in Dunedin.

Hmm, I see the dilemma now. I'll chat to some of our suppliers here in wellington and see what they can find.

ADKM

860 posts

Ultimate Geek

#868798 30-Jul-2013 18:36

Thanks... would be beaut if you found some. Just need a piece around 3ft4" x 3ft2"

Cheers - Kirk