And Now MediaPortal 1.1.0 RC4 Released

Forums › Home Theatre (including HTPC and EPG Collector) › And Now MediaPortal 1.1.0 RC4 Released

Dingbatt

6757 posts

Uber Geek

Lifetime subscriber

#62266 2-Jun-2010 20:10

RC4 loaded up and operating fine. I stopped TV-Server before the update this time and installation was flawless.
Apparently RC5 in a fortnight and then 1.1.0 final a fortnight after that.

“We’ve arranged a society based on science and technology, in which nobody understands anything about science technology. Carl Sagan 1996

1 | 2

160 posts

Master Geek

#337806 3-Jun-2010 13:47

Installed correctly even with TVserver running for me. Will Likely wait a few weeks and then do a clean install of the final version. Not 100% confident that some of the upgrades I've done have left things in the best condition.
It's looking pretty stable though, runs a lot smoother than earlier versions too!

dale77

294 posts

Ultimate Geek

#338103 3-Jun-2010 22:58

It's looking pretty stable though, runs a lot smoother than earlier versions too!

Glad to hear that, although 1.0.2 was silky smooth for me. Were you referring to earlier RC's?

Anyway, I'll soon have personal experience of 1.1RC4

HTPC: Antec Fusion 430, Intel i3, Gigabyte 1050, Corsair 4x1Gb, Hauppauge WinTv, Logitech z-5500, Logitech Harmony 525, Yamaha Rx-v6a, Samsung KS8000 4k, Windows 10, Mediaportal 1.30, BLU-RAY: Panasonic UB820

elkano

160 posts

Master Geek

#338121 3-Jun-2010 23:22

dale77:
It's looking pretty stable though, runs a lot smoother than earlier versions too!

Glad to hear that, although 1.0.2 was silky smooth for me. Were you referring to earlier RC's?

Anyway, I'll soon have personal experience of 1.1RC4

Hey Dale.

Yeah, the previous RC3 was a little buggy when upgrading from previous builds with tvservice running (thus they released RC4 early) and I was having a few issues with RC2. Most of my problems were associated with streaming to other client PC's though.

1.0.2 is definitely a good build, but there were a few nice-to-haves in the 1.1.0 builds that I decided were worth running the RC's. Now its getting to the point where stability is very good and I'm looking forward to the final build.

But then I guess MP2 is around the corner as soon as thats done

askelon

879 posts

Ultimate Geek

ID Verified

#338152 4-Jun-2010 08:45

Ive found RC4 to be pretty buggy so far. Its fixed a couple of faults I was having with RC3 - mainly the losing picture when changing channels but its introduced a pausing/stuttering fault every now and then - I ended up uninstalling and reinstalling - fixed it somewhat but not completely.

elkano

160 posts

Master Geek

#338160 4-Jun-2010 09:00

askelon: Ive found RC4 to be pretty buggy so far. Its fixed a couple of faults I was having with RC3 - mainly the losing picture when changing channels but its introduced a pausing/stuttering fault every now and then - I ended up uninstalling and reinstalling - fixed it somewhat but not completely.

Interesting, its been working brilliantly for me. Guess thats why its good to try with different hardware and systems!

dale77

294 posts

Ultimate Geek

#338387 4-Jun-2010 21:26

askelon: Ive found RC4 to be pretty buggy so far. Its fixed a couple of faults I was having with RC3 - mainly the losing picture when changing channels but its introduced a pausing/stuttering fault every now and then - I ended up uninstalling and reinstalling - fixed it somewhat but not completely.

I also see some stuttery stuff happening with RC4, doesn't always happen, but it's there.

Oh well, back to 1.0.2.

elkano

160 posts

Master Geek

#338464 5-Jun-2010 10:08

dale77:
askelon: Ive found RC4 to be pretty buggy so far. Its fixed a couple of faults I was having with RC3 - mainly the losing picture when changing channels but its introduced a pausing/stuttering fault every now and then - I ended up uninstalling and reinstalling - fixed it somewhat but not completely.

I also see some stuttery stuff happening with RC4, doesn't always happen, but it's there.

Oh well, back to 1.0.2.

Hmm. You're on Vista with a 4670? I'm running Win7 home premium, 4670 on 10.2 Catalyst drivers.
I had it run for about 3-4 hours last night, couldn't see any sign of the stuttering that seems to be affecting others.

Wonder if anyone has added this to the mediaportal buglist because its a showstopper for most!

Quic Broadband

Move to New Zealand's best fibre broadband service (affiliate link). Free setup code: R587125ERQ6VE. Note that to use Quic Broadband you must be comfortable with configuring your own router.

reg52nz

31 posts

Geek

#338556 5-Jun-2010 16:14

My MediaPortal is running the best it ever has since updating to 1.1 RC4, mind you the upgrade also coincided with me finally upgrading to a decent graphics card.

Only problem I have noticed is that although Campbell Live records fine on TV3 it wont playback any video just audio in MP. The same files playback fine in Windows Media Player and VLC. All other programs on TV3 record and playback fine.

dale77

294 posts

Ultimate Geek

#338897 6-Jun-2010 22:04

I'm running cat 10.5, what works flawlessly on 1.0.2 is seriously flawed on 1.1rc4. Can't be tolerated unfortunately.

1gkar

722 posts

Ultimate Geek

#339016 7-Jun-2010 12:47

Reg1952: My MediaPortal is running the best it ever has since updating to 1.1 RC4, mind you the upgrade also coincided with me finally upgrading to a decent graphics card.

Only problem I have noticed is that although Campbell Live records fine on TV3 it wont playback any video just audio in MP. The same files playback fine in Windows Media Player and VLC. All other programs on TV3 record and playback fine.

What codec chain is being used? Use GraphStudio to determine.

Silverstone LC14 HTPC Case/Intel E4600 CPU/GA-EP35-DS3 MOBO/Asus EN9500GT graphics/2GB RAM/total 2TB HDD space/HVR-2200 & 2X 150MCE tuner cards/LG GGC-H20L BD Drive/MCE2005/Mediaportal/TVServer 1.1.0Final/LG 55"3D LED-TV/Denon AVR-1803 receiver/X1 projector

reg52nz

31 posts

Geek

#339064 7-Jun-2010 17:12

1gkar:
Reg1952: My MediaPortal is running the best it ever has since updating to 1.1 RC4, mind you the upgrade also coincided with me finally upgrading to a decent graphics card.

Only problem I have noticed is that although Campbell Live records fine on TV3 it wont playback any video just audio in MP. The same files playback fine in Windows Media Player and VLC. All other programs on TV3 record and playback fine.
What codec chain is being used? Use GraphStudio to determine.

Video is Microsoft DTV - DVD Video Decoder

Audio is MPC MPA Decoder Filter

1gkar

722 posts

Ultimate Geek

#339443 8-Jun-2010 16:57

Reg1952:
1gkar:
Reg1952: My MediaPortal is running the best it ever has since updating to 1.1 RC4, mind you the upgrade also coincided with me finally upgrading to a decent graphics card.

Only problem I have noticed is that although Campbell Live records fine on TV3 it wont playback any video just audio in MP. The same files playback fine in Windows Media Player and VLC. All other programs on TV3 record and playback fine.
What codec chain is being used? Use GraphStudio to determine.

Video is Microsoft DTV - DVD Video Decoder

Audio is MPC MPA Decoder Filter

And that is confirmed through GraphStudio? Does the file playback properly through GS? Or through another player that has its codecs, like GOM?

reg52nz

31 posts

Geek

#339553 8-Jun-2010 21:27

1gkar:
Reg1952:
1gkar:
Reg1952: My MediaPortal is running the best it ever has since updating to 1.1 RC4, mind you the upgrade also coincided with me finally upgrading to a decent graphics card.

Only problem I have noticed is that although Campbell Live records fine on TV3 it wont playback any video just audio in MP. The same files playback fine in Windows Media Player and VLC. All other programs on TV3 record and playback fine.
What codec chain is being used? Use GraphStudio to determine.

Video is Microsoft DTV - DVD Video Decoder

Audio is MPC MPA Decoder Filter
And that is confirmed through GraphStudio? Does the file playback properly through GS? Or through another player that has its codecs, like GOM?

Yes GS confirms that and it will play back fine in GS and Windows Media Player and VLC, but only plays back sound in MediaPortal. What is even more bizzarre is that I recorded Campbell Live tonight on TV3Plus one as well as TV3 with exactly the same result. Even more odd is that the first three minutes of the program that is tacked on the end on TV3 news plays back fine in MP.

I am wondering whether it is in fact actually nothing to do with Mediaportal , but maybe something to do with the program that I use to grap EPG data with. I am using EPG collector, a program I got via a Geekzone forum. It grabs all my EPG data directly from the Tuner card. Well I think thats what it is doing.

huckster

843 posts

Ultimate Geek

ID Verified

Lifetime subscriber

#339589 8-Jun-2010 22:22

Upgraded from a 1.0 version over the weekend skipping 1.0.1 etc. which didn't like "lower powered" IGPs.

I wanted to upgrade because the TV Guide was really slow to navigate around. This version looks good, but is a bit slow when trying to setup a recording. Gonna try this when I can...

http://forum.team-mediaportal.com/mediaportal-1-1-0-rc-3-4-519/selecting-show-record-82514/index3.ht...

huckster

843 posts

Ultimate Geek

ID Verified

Lifetime subscriber

#339752 9-Jun-2010 12:24

huckster: Upgraded from a 1.0 version over the weekend skipping 1.0.1 etc. which didn't like "lower powered" IGPs.

I wanted to upgrade because the TV Guide was really slow to navigate around. This version looks good, but is a bit slow when trying to setup a recording. Gonna try this when I can...

http://forum.team-mediaportal.com/mediaportal-1-1-0-rc-3-4-519/selecting-show-record-82514/index3.ht...

Bugger. Patch in post is for RC3 and actual release is in RC5.

1 | 2