2talk + FreePBX inbound calls fail

Forums › VoIP › 2talk + FreePBX inbound calls fail

mentalinc

1567 posts

Uber Geek
+1 received by user: 152

Trusted

Topic # 122124 25-Jun-2013 16:11

Hi All

I have freePBX and Asterisk setup on my Raspberry pi.
I'm running the normal Raspbian build so followed the following guide to setup:

I used the following versions since they're newer.
freepbx-2.11.0rc1
asterisk-11.4.0

I'm using my Galaxy S3 built-in SIP client "Internet calling". It's listed as "Primary Account. Receiving Calls"

I'm able to call outbound to another cellphone via the 2Talk account and the phone will ring and shows my 2talk number in the caller ID.
You can talk on wifi but when trying to answer with 3G the following error is shown in the log "Retransmission timeout reached on transmission"

When ever I try to call from my cellphone to my S3. The 2Talk voicemail kicks in straight away.

Any hints on what I need to configure or change to allow incoming calls?

If I dial *97 while on 3G I go to the Asterisk voicemail...

FreePBX Connections
IP Phones Online 1 IP Trunks Online 1 IP Trunk Registrations 1

CPU: Intel 3770k| RAM: F3-2400C10D-16GTX G.Skill Trident X |MB: Gigabyte Z77X-UD5H-WB | GFX: GV-N660OC-2GD gv-n660oc-2gd GeForce GTX 660 | Monitor: Qnix 27" 2560x1440

chevrolux

3536 posts

Uber Geek
+1 received by user: 1292

Subscriber

Reply # 844099 25-Jun-2013 16:33

I would suggest it is just simply the latency in the 3G network. Or maybe your 3G device is behind a firewall so it is juts pot luck whether the call connects or not.
Is it all fine when on a 'decent' wifi connection?

mentalinc

1567 posts

Uber Geek
+1 received by user: 152

Trusted

Reply # 844117 25-Jun-2013 16:39

I haven't be able to call at all from an external line to my wifi connected S3.
Always goes to 2Talk Voicemail.

CPU: Intel 3770k| RAM: F3-2400C10D-16GTX G.Skill Trident X |MB: Gigabyte Z77X-UD5H-WB | GFX: GV-N660OC-2GD gv-n660oc-2gd GeForce GTX 660 | Monitor: Qnix 27" 2560x1440

chevrolux

3536 posts

Uber Geek
+1 received by user: 1292

Subscriber

Reply # 844118 25-Jun-2013 16:42

NAT issue. Does your router have a SIP ALG function? Turn it off.

Does the line show as registered in the 2Talk portal? And are you using sip.2talk.co.nz? Make sure your account has had 2Talk+ enabled too. It seems to be doing weird things with the old platform at the moment. I wish they would just turn it off.

mentalinc

1567 posts

Uber Geek
+1 received by user: 152

Trusted

Reply # 844126 25-Jun-2013 16:55

Disabled SIP on my tomato Router. under "Tracking / NAT Helpers"

Number xxxx is currently ONLINE - Internet Address:xxxxx

Using sip.2talk.co.nz

I just signed up today so assume I have 2Talk+. Can't seen anything to enable in the preferences page.

Still calls go straight to voicemail.

I've forward port 5060 and 10001-20000 but this didn't change anything.

CPU: Intel 3770k| RAM: F3-2400C10D-16GTX G.Skill Trident X |MB: Gigabyte Z77X-UD5H-WB | GFX: GV-N660OC-2GD gv-n660oc-2gd GeForce GTX 660 | Monitor: Qnix 27" 2560x1440

chevrolux

3536 posts

Uber Geek
+1 received by user: 1292

Subscriber

Reply # 845148 25-Jun-2013 17:43

Have you created an inbound route in freepbx?

mentalinc

1567 posts

Uber Geek
+1 received by user: 152

Trusted

Reply # 845172 25-Jun-2013 18:33

Inbound rule as below:
[img]http://www.iforce.co.nz/View.aspx?i=doec3qgy.iq1.png[/img]

Edit:

in the trunk settings what should be in the section Incoming Settings?

Is it a copy of the stuff in outgoing?

this link isn't clear.

CPU: Intel 3770k| RAM: F3-2400C10D-16GTX G.Skill Trident X |MB: Gigabyte Z77X-UD5H-WB | GFX: GV-N660OC-2GD gv-n660oc-2gd GeForce GTX 660 | Monitor: Qnix 27" 2560x1440

sbiddle

26792 posts

Uber Geek
+1 received by user: 6271

Moderator

Trusted

Biddle Corp

Lifetime subscriber

Reply # 845209 25-Jun-2013 19:40

I'm totally confused by what you've posted but you'll clearly run into issues over 3G with a NAT'd APN depending on your timeout periods.

mentalinc

1567 posts

Uber Geek
+1 received by user: 152

Trusted

Reply # 845214 25-Jun-2013 19:49

Ok so I've narrowed it down. Ignore the 3G stuff for now I think. (let's get it working when the S3 is on wifi).

If I set the Inbound rule destination to "Terminate Call -> Put caller on hold forever" I can call through and get played the hold Music = Success.

So I guess the problem is with the the extension transfer.

Am I missing something in how to setup an extension?

I notice the following appear every now and then in the logs....

Peer '6288' is now Lagged. (2246ms / 2000ms)
Peer '6288' is now Reachable. (981ms / 2000ms)

Peer 6288 is my S3 which is connected to the same network as the Raspberry Pi.

CPU: Intel 3770k| RAM: F3-2400C10D-16GTX G.Skill Trident X |MB: Gigabyte Z77X-UD5H-WB | GFX: GV-N660OC-2GD gv-n660oc-2gd GeForce GTX 660 | Monitor: Qnix 27" 2560x1440

mentalinc

1567 posts

Uber Geek
+1 received by user: 152

Trusted

Reply # 845226 25-Jun-2013 20:09

Not sure what I changed but seems to be all working now over wifi. 3G can wait for another day.

Pasting settings below for safe keeping...

SIP Trunk settings:
Outgoing Settings
Peer Details

host=sip.2talk.co.nz
username=xxxxxxxxxxxx
fromuser=xxxxxxxxxxxx
secret=YYYYYYYYYYYYYYYYYYYYYYYYYY
type=friend
dtmfmode=rfc2833
context=default
disallow=all
allow=ilbc&gsm&alaw&ulaw
;allow=g729 ; only if you have licenses to use it
insecure=invite,port
nat=yes
canreinvite=no

Incoming Settings

USER Context xxxxxxxxxxxx

USER Details
type=peer
context=from-trunk
host=sip.2talk.co.nz
username=XXXXXXXXXXXXXXXX
secret=YYYYYYYYYYYY
dtmfmode=rfc2833
disallow=all
allow=ilbc&gsm&alaw&ulaw
;allow=g729
insecure=invite,port
nat=yes
canreinvite=no

CPU: Intel 3770k| RAM: F3-2400C10D-16GTX G.Skill Trident X |MB: Gigabyte Z77X-UD5H-WB | GFX: GV-N660OC-2GD gv-n660oc-2gd GeForce GTX 660 | Monitor: Qnix 27" 2560x1440

chevrolux

3536 posts

Uber Geek
+1 received by user: 1292

Subscriber

Reply # 845228 25-Jun-2013 20:15

Jump on to the asterisk debug and do a 'sip show peers'.

Check your extension has a current registration. It mostly points to the device not being registered. Do you have voicemail enabled on that extension? If it isnt registered it should just go to the mailbox.

mentalinc

1567 posts

Uber Geek
+1 received by user: 152

Trusted

Reply # 845263 25-Jun-2013 20:58

Yeah now using the Asterisk voicemail instead of the 2Talk when my S3 isn't registered.

Now to figure out the 3G stuff - that can wait till the weekend I think.

CPU: Intel 3770k| RAM: F3-2400C10D-16GTX G.Skill Trident X |MB: Gigabyte Z77X-UD5H-WB | GFX: GV-N660OC-2GD gv-n660oc-2gd GeForce GTX 660 | Monitor: Qnix 27" 2560x1440