Telecom ONT to Draytek Vigor2130n

Forums › LAN (ethernet/Wifi/routers/Bluetooth) › Telecom ONT to Draytek Vigor2130n

mushtac

157 posts

Master Geek

#142832 26-Mar-2014 08:40

To connect my Draytek Vigor2130n to my Telecom ONT (fibre) do I use PPPoE?

LennonNZ

2459 posts

Uber Geek
+1 received by user: 411

ID Verified

Trusted

#1012901 26-Mar-2014 09:03

It depends on your ISP. It could be PPPoE, it could be DHCP, it could be a static settings.. Different ISPs do it differently.

Ask your ISP for the connection details

UFB is a Layer 2 service so it depends on how the ISP has implemented it.

chevrolux

4962 posts

Uber Geek
+1 received by user: 2638
Inactive user

#1012944 26-Mar-2014 09:51

Telecom UFB is always PPPoE with VLAN10.

Username is user@xtrabb.co.nz and password can just be 'password'

Talkiet

4819 posts

Uber Geek
+1 received by user: 3934

Trusted

#1012957 26-Mar-2014 09:58

mushtac: To connect my Draytek Vigor2130n to my Telecom ONT (fibre) do I use PPPoE?

Little point though - the ONT is not supplied by Telecom, It's from the LFC.

I am presuming you want to REPLACE the Telecom supplied router with the Draytek, and connect to the ONT? If that's the case, then the advice above is fine.

Cheers- N

Please note all comments are from my own brain and don't necessarily represent the position or opinions of my employer, previous employers, colleagues, friends or pets.

mushtac

157 posts

Master Geek

#1014129 27-Mar-2014 20:01

Need assistance with PPPoE/VLAN settings on Draytek Vigor2130n:
I have PPPoE & WAN VLAN ID:10 enabled & can't get it to work with blank username/password or user@xtrabb.co.nz/password

nitrotech

1285 posts

Uber Geek
+1 received by user: 168

#1014162 27-Mar-2014 20:38

mushtac: Need assistance with PPPoE/VLAN settings on Draytek Vigor2130n:
I have PPPoE & WAN VLAN ID:10 enabled & can't get it to work with blank username/password or user@xtrabb.co.nz/password

Put one into a clients a couple of months ago and no issues with the settings.

Can you screen shot the wan page

mushtac

157 posts

Master Geek

#1014167 27-Mar-2014 20:48

Lego

Shop now for Lego sets and other gifts (affiliate link).

nitrotech

1285 posts

Uber Geek
+1 received by user: 168

#1014170 27-Mar-2014 20:52

Are you running the latest firmware? Mare sure you upgrade with the right package to keep your settings.

You need a user name and password - eg user@xtrabb.co.nz and 1234567

And vlan 10

mushtac

157 posts

Master Geek

#1014209 27-Mar-2014 22:21

Thanks nitrotech, followed your advice & now have it connected to my fibre.

nitrotech

1285 posts

Uber Geek
+1 received by user: 168

#1014224 27-Mar-2014 22:37

Good news - the 2130 is a great router I'm sure you'll enjoy it.