Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


61 posts

Master Geek


Topic # 14704 16-Jul-2007 21:39
Send private message

please help me n give me some tips

Im On a slingshot Express Everyday 25GB plan and a dlink modem one of those free ones that i got off a friend internet kept cutting out and thought it was because the modem was so cheap went to dse powerhouse and said i wanted the best wireless modem they offered me a dink one or a linksys and i wasnt very keen on the dlink, so got the linksys one its a wireless-g adsl home gateway all in one solution... says its ADSL2/2+ modem, internet-sharing router, 4 port switch and wireless-g access point. the model number is WAG200G and i have set up the slingshot settings on the linksys settings page "192.168.1.1" e.g ----@jetbuster.co.nz etc etc even though thats not the address but an example. any way its much better but it still cuts out now and then but im sure i dont have the settings correct but i have no idea what to do i tried getting the settings of the slingshot website and found them but had no idea what to do with them msn sometimes says theirs some kind of dns error or something but not very sure i dont know how someone coud help but im up for any suggestions etc... please help!!

p.s ive also got the Encapsulation: on RFC 2364 PPPoA
Multiplexing: on VC not LLC
PCR rate and SCR rate on nothing
Virtual Circuit: ..... VPI = 0 ....... VCI = 100 ...
DSL Modulation: T1.413

PPPoA Settings: ... Username: *******@jetbuster.co.nz... Password: ********

THIS IS SELECTED:
Connect on Demand: Max Idle Time Minutes



AND THIS IS NOT SELECTED: Keep Alive: Redial period Seconds


Optional Settings:
Host Name:
Domain Name:
MTU: Auto Manual
Size:
Nothing written in!!!!!



Router IP:

Local IP Address: . . .
Subnet Mask: 255.255.255.0 255.255.255.128 255.255.255.192 255.255.255.224 255.255.255.240 255.255.255.248 255.255.255.252


Network Address
Server Settings (DHCP):

DHCP Server: Enable Disable DHCP Relay
DHCP Server: . . .
Starting IP Address: 192.168.1.

Maximum Number of
DHCP Users:
Client Lease Time: minutes (0 means one day)
Static DNS 1: . . .
Static DNS 2: . . .
Static DNS 3: . . .
WINS: . . .


DDNS SERVICE: DISABLED

Advanced Routing:

Operating Mode: ....... NAT .... ENabled

Dynamic Routing: RIP:
Transmit RIP Version:

Receive RIP Version:
Enabled Disabled
RIP1 RIP1-Compatible RIP2 Disable

RIP1 RIP2 Disable


STATIC ROUTING::


Select Set Number: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Destination IP Address: NONE
Subnet Mask: NONE
Gateway: NONE
Hop Count:



STATUS:


GAteway Information:

Firmware Version: 1.01.01
MAC Address: 00:18:39:3C:19:43
Current Time: 2007-07-12 21:43:30


Internet Connection: (CURRENTLY WORKING)

Login Type RFC 2364 PPPoA
Interface: Up
IP Address: 203.184.47.184
Subnet Mask: 255.255.255.255
Default Gateway: 202.180.81.28
DNS1: 202.180.64.2
DNS2: 202.180.64.9
DNS3:
WINS:


DSL CONNECTION:


DSL Status: Connected
DSL Modulation Mode: T1.413
DSL Path Mode: Interleaved
Downstream Rate: 5600 kbps
Upstream Rate: 160 kbps
Downstream Margin: 9 db
Upstream Margin: 30 db
Downstream Line Attenuation: 45 db
Upstream Line Attenuation: 14.5 db
Downstream Transmit Power: 0
Upstream Transmit Power: 0


PVC Connection:

Encapsulation: RFC 2364 PPPoA
Multiplexing: VC
Qos: UBR
Pcr Rate: 0
Scr Rate: 0
Autodetect: Disable
VPI: 0
VCI: 100
Enable: Yes
PVC Status: Up


[Moderator edit (MF): subject changed to reflect discussion]

Create new topic
3594 posts

Uber Geek
+1 received by user: 79

Trusted
WorldxChange

  Reply # 78379 17-Jul-2007 06:09
Send private message

Change the DSL Modulation type to G.dmt




Yes I am a employee of WxC (My Profile) ... but I do have my own opinions as well Wink

             

https://www.facebook.com/wxccommunications



61 posts

Master Geek


  Reply # 78648 18-Jul-2007 16:00
Send private message

still doesnt work :-(

2066 posts

Uber Geek
+1 received by user: 343

Lifetime subscriber

  Reply # 79203 22-Jul-2007 14:10
Send private message

DESELECT: Connect on demand.

Downstream line attenuation of 45 db indicates over 3 km from exchange. Next step is to have Telecom change the DSLAM port and wire pair between exchange and your house.




Ross

 

Spark FibreMAX using Mikrotik CCR1009-8G-1S-1S+

 


Speed Test




61 posts

Master Geek


Reply # 79230 22-Jul-2007 19:21
Send private message

ok so what does that involve will it cost??

2066 posts

Uber Geek
+1 received by user: 343

Lifetime subscriber

  Reply # 79241 22-Jul-2007 22:02
Send private message

It involves being extremely persistent to the level 2 fault finding people. Just tell them what you have told us. I would have also eliminated any potential problems with house wiring. If you have a splitter installed (dedicated ADSL outlet) then there should be no issue there.




Ross

 

Spark FibreMAX using Mikrotik CCR1009-8G-1S-1S+

 


Speed Test


1818 posts

Uber Geek
+1 received by user: 52

Trusted

  Reply # 81661 8-Aug-2007 23:20
Send private message

I use more than just slingshot's dns server as sometimes, it would go down. Don't know if they fixed that.

Your post was great with very useful infomation.

Have you thought of posting it to http://forums.slingshot.co.nz the admins will say log the fault if it's a serious issue and get a job number regarding the problem.  There was a post on geekzone about dial the chines helpdesk as there is no wait and there english is good, if you are logging a fault.

I have found the service I'm getting is great for the last month and a bit. currently my cap has run out and im still getting a good 'surfable' 64k connection, good pings (100-70ms)



Create new topic

Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.