Orcon UFB users

Forums › 2degrees (including Slingshot, Orcon, Flip, Stuff Fibre, MyRepublic, 2talk and Vocus) › Orcon UFB users

Kiwiownage

112 posts

Master Geek

#139516 11-Feb-2014 20:10

Hey guys,

Can any of you UFB users do a speedtest to LA? Preferably to the California Internet Solutions server.

Preeeeetttyyy please, Probably going to move to Orcon because I've been getting close to 1mbs to overseas on 100/50 with snap for a month now :|

PeterReader

6018 posts

Uber Geek

Trusted

Geekzone

Lifetime subscriber

#984436 11-Feb-2014 20:10

Hello... Our robot found some keywords in your post, so here is an automated reply with some important things to note regarding broadband speeds.

If you are posting regarding DSL speeds please check that

- you have reset your modem and router

- your PC (or other PCs in your LAN) is not downloading large files when you are testing

- you are not being throttled by your ISP due to going over the monthly cap

- your tests are always done on an ethernet connection to the router - do not use wireless for testing

- you read this topic and follow the instructions there.

Make sure you provide information for other users to help you. If you have not already done it, please EDIT your post and add this now:

- Your ISP and plan

- Type of connection (ADSL, ADSL2, VDSL)

- Your modem DSL stats (do not worry about posting Speedtest, we need sync rate, attenuation and noise margin)

- Your general location (or street)

- If you are rural or urban

- If you know your connection is to an exchange, cabinet or conklin

- If your connection is to a ULL or wholesale service

- If you have done an isolation test as per the link above

Most of the problems with speed are likely to be related to internal wiring issues. Read this discussion to find out more about this. Your ISP is not intentionally slowing you down today (unless you are on a managed plan). Also if this is the school holidays it's likely you will notice slower than usual speed due to more users online.

A master splitter is required for VDSL2 and in most cases will improve speeds on DSL connections. Regular disconnections can be a monitored alarm or a set top box trying to connect. If there's an alarm connected to your line even if you don't have an alarm contract it may still try to connect so it's worth checking.

I recommend you read these two blog posts:

- Is your premises phone wiring impacting your broadband performance? (very technical)

- Are you receiving a substandard ULL ADSL2+ connection from your ISP?

I am the Geekzone Robot and I am here to help. I am from the Internet. I do not interact. Do not expect other replies from me.

These links are referral codes: Sharesies | Mighty Ape

linw

2849 posts

Uber Geek

#984519 11-Feb-2014 21:16

Orcon UFB 30/10 connection. Test to LA CIS server.

384ms ping 11/8 Mbps dn/up (avge of 3 tests).

maslink

131 posts

Master Geek

Subscriber

#984544 11-Feb-2014 21:42

Something seems wrong there...FWIW I get between 10-15 down and 5-10 up on Snap 200/50 and I was feeling a little short changed...

insane

3239 posts

Uber Geek

ID Verified

Trusted

#984616 11-Feb-2014 22:28

maslink: Something seems wrong there...FWIW I get between 10-15 down and 5-10 up on Snap 200/50 and I was feeling a little short changed...

The 200/50 trial has a lower CIR than the slower plans, so assuming contention in the chorus network exists you could be worse off on your faster burst rate plan. Just a thought.

FireEngine

1223 posts

Uber Geek

Trusted

#984619 11-Feb-2014 22:31

maslink: Something seems wrong there...FWIW I get between 10-15 down and 5-10 up on Snap 200/50 and I was feeling a little short changed...

To LA?

Regards FireEngine

maslink

131 posts

Master Geek

Subscriber

#984699 12-Feb-2014 06:45

FireEngine:
maslink: Something seems wrong there...FWIW I get between 10-15 down and 5-10 up on Snap 200/50 and I was feeling a little short changed...

To LA?

Yes.

maslink

131 posts

Master Geek

Subscriber

#984701 12-Feb-2014 06:50

insane:
maslink: Something seems wrong there...FWIW I get between 10-15 down and 5-10 up on Snap 200/50 and I was feeling a little short changed...

The 200/50 trial has a lower CIR than the slower plans, so assuming contention in the chorus network exists you could be worse off on your faster burst rate plan. Just a thought.

Don't think thats it. I get >180 to most NZ sites ( and >195 to Snap) at pretty much any time of the day, so there's no problem between me and Snap. And yes, the same result on multiple computers - Mac & Windows

AliExpress

Shop now on AliExpress (affiliate link).

Oblivian

7297 posts

Uber Geek

ID Verified

#984734 12-Feb-2014 08:55

maslink:
FireEngine:
maslink: Something seems wrong there...FWIW I get between 10-15 down and 5-10 up on Snap 200/50 and I was feeling a little short changed...

To LA?

Yes.

Click the image tab, copy link to the PNG. No copy/paste and blurring of a non info revealing link

Zeon

3916 posts

Uber Geek

Trusted

#984802 12-Feb-2014 09:55

Remember guys because of TCP you aren't going to be getting that great speeds to high latency sites.

Speedtest 2019-10-14

browned

636 posts

Ultimate Geek

#984892 12-Feb-2014 11:01

100/50 Orcon UFB in Hamilton.

132ms ping, 25.78Mbps down, 5.47Mbps up. To LA, CA Atlantic Metro.

5am

16 posts

Geek

#987785 15-Feb-2014 14:53

100/50 UFB. Join Orcon at your own risk the speeds change so much its stupid. Been fighting to get over 3000kbps upload to twitch servers in LA for months still no fix. But on the other hand, some things are super fast.

Jase2985

13459 posts

Uber Geek

ID Verified

Lifetime subscriber

#987801 15-Feb-2014 15:26

lol im pretty sure the problem is not with orcon, its a bottle neck somewhere after it leaves NZ, as i get the same result as you and im on telecom 60/10.

pretty much anything overseas you will not get the line speed of your connection as there are different factors at play + numerous different servers/paths you data has to navigate which will give you slower results like you have shown there.

so really dont go jumping on your ISP for the slow speed when more than likely its an issue they cant control :)