3rd Party Router (Nighthawk R7000) With Orcon Gigabit

Forums › 2degrees (including Slingshot, Orcon, Flip, Stuff Fibre, MyRepublic, 2talk and Vocus) › 3rd Party Router (Nighthawk R7000) With Orcon Gigabit

stiggy

58 posts

Master Geek
+1 received by user: 3

#205565 17-Nov-2016 23:03

Hi Team,

Just signed up toi get Orcon Gigabit (moving off Spark) and was wondering if its possible to use my existing Nighthawk with Orcon. They tell me theyd preferr i used their router, but if i can get mine going they hey power to me. Was wondering if anyone had any tip/suggestions on getting it going. Connection date is the 22nd so ive got a few days of research ahead.

Cheers

Lorenceo

904 posts

Ultimate Geek
+1 received by user: 336

Trusted

#1673234 17-Nov-2016 23:30

Pretty sure Orcon use DHCP, tagged on VLAN 10. Whichever firmware you use on the R7000 will need to support CTF or hardware acceleration in order to get the full speed.

stiggy

58 posts

Master Geek
+1 received by user: 3

#1673249 17-Nov-2016 23:55

I believe CTF is enabled as long as i dont use QoS, Traffic Meter or loggin. I dont use theese anyway so should be all good.

stiggy

58 posts

Master Geek
+1 received by user: 3

#1677105 25-Nov-2016 00:01

Can confirm i have my nighthawk running on Orcon, literally had to change one setting to convert from spark. Seem to be capping out at 460Mbps whihc would suggest CTF issues, but will test further at the weekend and compare with the Orcon Provided Fritzbox.

michaelmurfy

meow
13367 posts

Uber Geek
+1 received by user: 10370

Moderator

ID Verified

Trusted

Lifetime subscriber

#1677106 25-Nov-2016 00:15

stiggy:

Can confirm i have my nighthawk running on Orcon, literally had to change one setting to convert from spark. Seem to be capping out at 460Mbps whihc would suggest CTF issues, but will test further at the weekend and compare with the Orcon Provided Fritzbox.

Since Orcon UFB matches Vodafone FibreX in terms of configuration @mdf has what you're needing to do in order to get full speed on this excellent guide: http://www.geekzone.co.nz/forums.asp?forumid=40&topicid=205229

Michael Murphy | https://murfy.nz
Referral Links: Quic Broadband (use R122101E7CV7Q for free setup)

Are you happy with what you get from Geekzone? Please consider supporting us by subscribing.
Opinions are my own and not the views of my employer.

stiggy

58 posts

Master Geek
+1 received by user: 3

#1678845 28-Nov-2016 13:15

Advanced Tomato is amazing. Pulling 760 minimum now. Cheers