![]() ![]() ![]() |
|
mrgsm021: I just flashed Batista 70 Foxhound Edition 3.0 based on XWKL1 with Siyah v2.6.6 kernel but I can't seem to get BLN working properly. I have the BLN control app and it is enabled but every time when a text comes through, the LEDs lit up momentarily at the same time when the screen is on, when the screen disappears, the LEDs goes off as well.
I was on v3rtr3ma.v.4.3.1 based on XWKK5 with the same kernel and BLN worked fine as it should, when the screen is off, LED stayed on.
Does anyone know what may caused this? The settings in the BLN app? Or maybe the ROM itself?
Brendan:Boot into CWM, do a wipe and a dalvik wipe (under advanced options). Re install your rom.
If that does not work, then do the same as the above, but this time go into mounts and FORMAT the system partition as well. Do NOT reboot. Install your rom.
If none of those work, use Odin to flash a stock rom. Then re-root.
nataSnz: I've been following this thread for quite a while now and hopefully someone will be able to help. I've bought a S2 from Parralel Imported about four months ago. I've been using Siyah Kernel and DarkROM and have just gotten back from Fiji. Now, while over there, for no apparent reason, the phone started overheating. I switched it off, and tried to restart it and it would get to the first screen and freeze. It would go no further. I was able to get it into Download Mode, but since I was in Fiji, couldn't do anything further. I couldn't get it into Recovery Mode. Now, when I got back today, I was able to start the phone and got to my homescreens, but then the phone switched itself off. I am now not even able to charge the phone, and can't get it into Download Mode? The battery indicator comes up, but it will not charge up.
Sorry about the long post, but I'm desperate for ideas.
Thanks.
nataSnz:nataSnz: I've been following this thread for quite a while now and hopefully someone will be able to help. I've bought a S2 from Parralel Imported about four months ago. I've been using Siyah Kernel and DarkROM and have just gotten back from Fiji. Now, while over there, for no apparent reason, the phone started overheating. I switched it off, and tried to restart it and it would get to the first screen and freeze. It would go no further. I was able to get it into Download Mode, but since I was in Fiji, couldn't do anything further. I couldn't get it into Recovery Mode. Now, when I got back today, I was able to start the phone and got to my homescreens, but then the phone switched itself off. I am now not even able to charge the phone, and can't get it into Download Mode? The battery indicator comes up, but it will not charge up.
Sorry about the long post, but I'm desperate for ideas.
Thanks.
Sorry about quoting myself but it was a few pages back that I posted this. I've bought a new battery and reflashed to the stock ROM and sadly, still no luck in getting any further than the front "Samsung Galaxy S II" screen. I've managed to get rid of the yellow triangle, but it still wont load into the phone itself.
Anyone have anymore idea?
Damager:nataSnz:nataSnz: I've been following this thread for quite a while now and hopefully someone will be able to help. I've bought a S2 from Parralel Imported about four months ago. I've been using Siyah Kernel and DarkROM and have just gotten back from Fiji. Now, while over there, for no apparent reason, the phone started overheating. I switched it off, and tried to restart it and it would get to the first screen and freeze. It would go no further. I was able to get it into Download Mode, but since I was in Fiji, couldn't do anything further. I couldn't get it into Recovery Mode. Now, when I got back today, I was able to start the phone and got to my homescreens, but then the phone switched itself off. I am now not even able to charge the phone, and can't get it into Download Mode? The battery indicator comes up, but it will not charge up.
Sorry about the long post, but I'm desperate for ideas.
Thanks.
Sorry about quoting myself but it was a few pages back that I posted this. I've bought a new battery and reflashed to the stock ROM and sadly, still no luck in getting any further than the front "Samsung Galaxy S II" screen. I've managed to get rid of the yellow triangle, but it still wont load into the phone itself.
Anyone have anymore idea?
go into CWM and wipe the dalvik cache. clear cache and user data and then load rom, and try again.
Galaxy S10
Garmin Fenix 5
jeffnz: so how do we address you now jinx, oopps mean k1 ;). Seen the avatar on a few differant forums so put 2 +2 together, its just that jinx is easier to identify with
|
![]() ![]() ![]() |