|
|
|
Social Bitcoin meetup every 2 weeks in Hamilton PM me for details
Samsung Galaxy S I9000 8GB | 16GB Apacer SD | Baseband Version: I9000BUJP5 | Kernel Version: 2.6.32.9. Hardcore's Kernel SpeedMod K13C with HZ=500 | Build: DOC XWJS7 v9.8
Bacha: hey
I tried to flash my phone with darkys 9.2 rom using the odin way.
http://forum.xda-developers.com/showthread.php?t=940671
First time flashing it... after following the instructions properly, did everything like it described.
odin message:
Added!!
Odin v.3 engine (ID:8)..
File analysis..
Enter CS for MD5..
Check MD5.. Do not unplug the cable..
Please wait..
Checking MD5 finished Sucessfully..
Leave CS..
SetupConnection..
Initialzation..
Set PIT file..
DO NOT TURN OFF TARGET
it just stuck there and didnt do anything for about 45mins... someone had the same problem on there and they fixed it by taking the battery out and putting the battery back in, I tried that and now when i go into recovery mood.... my phone shows phone with dotted lines then pc icon in the between those icons its showing triangle with the error symbol.... does that mean my phone is fully bricked? any solution with help thanks...
wazz:Bacha: hey
I tried to flash my phone with darkys 9.2 rom using the odin way.
http://forum.xda-developers.com/showthread.php?t=940671
First time flashing it... after following the instructions properly, did everything like it described.
odin message:
Added!!
Odin v.3 engine (ID:8)..
File analysis..
Enter CS for MD5..
Check MD5.. Do not unplug the cable..
Please wait..
Checking MD5 finished Sucessfully..
Leave CS..
SetupConnection..
Initialzation..
Set PIT file..
DO NOT TURN OFF TARGET
it just stuck there and didnt do anything for about 45mins... someone had the same problem on there and they fixed it by taking the battery out and putting the battery back in, I tried that and now when i go into recovery mood.... my phone shows phone with dotted lines then pc icon in the between those icons its showing triangle with the error symbol.... does that mean my phone is fully bricked? any solution with help thanks...
You should just be able to take the battery out and go back into download mode (vol down/power/home). This happens to me all the time, odin will fail the first flash every single time. After removing the battery and trying again it works, man I hate odin.
Samsung Galaxy S I9000 8GB | 16GB Apacer SD | Baseband Version: I9000BUJP5 | Kernel Version: 2.6.32.9. Hardcore's Kernel SpeedMod K13C with HZ=500 | Build: DOC XWJS7 v9.8
Bacha:
i tried that, its just shows those icons again...
wazz:Bacha:
i tried that, its just shows those icons again...
You'll have to make a jig then: http://forum.xda-developers.com/showthread.php?t=819551
Or if you're in auckland you could borrow mine.
Samsung Galaxy S I9000 8GB | 16GB Apacer SD | Baseband Version: I9000BUJP5 | Kernel Version: 2.6.32.9. Hardcore's Kernel SpeedMod K13C with HZ=500 | Build: DOC XWJS7 v9.8
Shrapnel:meeekael: Think I might give Docs ROM a crack tonight. What Base ROM, CSC, modems and kernels are recomended as giving the best performance here in New Zealand.
Currently running Darkys 9.2...
Thanks!
I'm running the Doc rom in my signature but that has been replaced with JS5(Too lazy to upgrade), I'm using the TNZ CSC for Telecom XT and Speedmod(K13A). Seems to work all fine and dandy, I'm sure the newer Doc Rom (JS5) would provide better performance and would do fine, CSC is really dependant on whether your Voda or XT(VNZ or TNZ). I think Speedmod is more aimed at stability compared to Voodoo but have only ever used Speedmod, and it is recommended.
mattyjnz:Shrapnel:meeekael: Think I might give Docs ROM a crack tonight. What Base ROM, CSC, modems and kernels are recomended as giving the best performance here in New Zealand.
Currently running Darkys 9.2...
Thanks!
I'm running the Doc rom in my signature but that has been replaced with JS5(Too lazy to upgrade), I'm using the TNZ CSC for Telecom XT and Speedmod(K13A). Seems to work all fine and dandy, I'm sure the newer Doc Rom (JS5) would provide better performance and would do fine, CSC is really dependant on whether your Voda or XT(VNZ or TNZ). I think Speedmod is more aimed at stability compared to Voodoo but have only ever used Speedmod, and it is recommended.
While we are on the topic of CSCs I have a wee problem.
After flashing Darky's 9.2 last week have just realised I am not able to receive calls (I am on XT). The phone rings once and then the reception bars drop to nothing and the phone loses service. Once the call has been cut off, it all comes back up again.
I can make calls, send / receive text messages and get mobile data and connect to wireless. Phone suggests it is on the telecom network.
My CSC is JP9 (XEE).....before flashing it used to say (TNZ). I note some people have a CSC as XEU, as opposed to VNZ or TNZ, so thought having XEE wouldn't be an issue....and it might not be, but I am miffed as to why I can't receive calls.
Would appreciate any thoughts you good folks might have as to what might be causing this problem, or any suggestions how it fix it.
Thanks.
nofam:mattyjnz:Shrapnel:meeekael: Think I might give Docs ROM a crack tonight. What Base ROM, CSC, modems and kernels are recomended as giving the best performance here in New Zealand.
Currently running Darkys 9.2...
Thanks!
I'm running the Doc rom in my signature but that has been replaced with JS5(Too lazy to upgrade), I'm using the TNZ CSC for Telecom XT and Speedmod(K13A). Seems to work all fine and dandy, I'm sure the newer Doc Rom (JS5) would provide better performance and would do fine, CSC is really dependant on whether your Voda or XT(VNZ or TNZ). I think Speedmod is more aimed at stability compared to Voodoo but have only ever used Speedmod, and it is recommended.
While we are on the topic of CSCs I have a wee problem.
After flashing Darky's 9.2 last week have just realised I am not able to receive calls (I am on XT). The phone rings once and then the reception bars drop to nothing and the phone loses service. Once the call has been cut off, it all comes back up again.
I can make calls, send / receive text messages and get mobile data and connect to wireless. Phone suggests it is on the telecom network.
My CSC is JP9 (XEE).....before flashing it used to say (TNZ). I note some people have a CSC as XEU, as opposed to VNZ or TNZ, so thought having XEE wouldn't be an issue....and it might not be, but I am miffed as to why I can't receive calls.
Would appreciate any thoughts you good folks might have as to what might be causing this problem, or any suggestions how it fix it.
Thanks.
Have you checked your IMEI to make sure it's intact? It will be printed on a sticker behind the battery somewhere - you can check it on the phone by dialing *#06#. Make sure they match.
mattyjnz:nofam:mattyjnz:Shrapnel:meeekael: Think I might give Docs ROM a crack tonight. What Base ROM, CSC, modems and kernels are recomended as giving the best performance here in New Zealand.
Currently running Darkys 9.2...
Thanks!
I'm running the Doc rom in my signature but that has been replaced with JS5(Too lazy to upgrade), I'm using the TNZ CSC for Telecom XT and Speedmod(K13A). Seems to work all fine and dandy, I'm sure the newer Doc Rom (JS5) would provide better performance and would do fine, CSC is really dependant on whether your Voda or XT(VNZ or TNZ). I think Speedmod is more aimed at stability compared to Voodoo but have only ever used Speedmod, and it is recommended.
While we are on the topic of CSCs I have a wee problem.
After flashing Darky's 9.2 last week have just realised I am not able to receive calls (I am on XT). The phone rings once and then the reception bars drop to nothing and the phone loses service. Once the call has been cut off, it all comes back up again.
I can make calls, send / receive text messages and get mobile data and connect to wireless. Phone suggests it is on the telecom network.
My CSC is JP9 (XEE).....before flashing it used to say (TNZ). I note some people have a CSC as XEU, as opposed to VNZ or TNZ, so thought having XEE wouldn't be an issue....and it might not be, but I am miffed as to why I can't receive calls.
Would appreciate any thoughts you good folks might have as to what might be causing this problem, or any suggestions how it fix it.
Thanks.
Have you checked your IMEI to make sure it's intact? It will be printed on a sticker behind the battery somewhere - you can check it on the phone by dialing *#06#. Make sure they match.
Thanks, yes had checked that. It's fine.
Social Bitcoin meetup every 2 weeks in Hamilton PM me for details
Social Bitcoin meetup every 2 weeks in Hamilton PM me for details
yochankr: Hi there
I have been trying to root my Galaxy S with z4root for about an hour now with no luck..
I do everything step by step and when I run the root it force closes constantly..
any ideas??
I really want to root my SGS :(
cokeman2:mattyjnz:nofam:mattyjnz:Shrapnel:meeekael: Think I might give Docs ROM a crack tonight. What Base ROM, CSC, modems and kernels are recomended as giving the best performance here in New Zealand.
Currently running Darkys 9.2...
Thanks!
I'm running the Doc rom in my signature but that has been replaced with JS5(Too lazy to upgrade), I'm using the TNZ CSC for Telecom XT and Speedmod(K13A). Seems to work all fine and dandy, I'm sure the newer Doc Rom (JS5) would provide better performance and would do fine, CSC is really dependant on whether your Voda or XT(VNZ or TNZ). I think Speedmod is more aimed at stability compared to Voodoo but have only ever used Speedmod, and it is recommended.
While we are on the topic of CSCs I have a wee problem.
After flashing Darky's 9.2 last week have just realised I am not able to receive calls (I am on XT). The phone rings once and then the reception bars drop to nothing and the phone loses service. Once the call has been cut off, it all comes back up again.
I can make calls, send / receive text messages and get mobile data and connect to wireless. Phone suggests it is on the telecom network.
My CSC is JP9 (XEE).....before flashing it used to say (TNZ). I note some people have a CSC as XEU, as opposed to VNZ or TNZ, so thought having XEE wouldn't be an issue....and it might not be, but I am miffed as to why I can't receive calls.
Would appreciate any thoughts you good folks might have as to what might be causing this problem, or any suggestions how it fix it.
Thanks.
Have you checked your IMEI to make sure it's intact? It will be printed on a sticker behind the battery somewhere - you can check it on the phone by dialing *#06#. Make sure they match.
Thanks, yes had checked that. It's fine.
i am on darky's rom 9.2 and on xt no problems here , did u leave darky app configurator too default setting or u played with the modem options ?
mattyjnz:nofam:mattyjnz:Shrapnel:meeekael: Think I might give Docs ROM a crack tonight. What Base ROM, CSC, modems and kernels are recomended as giving the best performance here in New Zealand.
Currently running Darkys 9.2...
Thanks!
I'm running the Doc rom in my signature but that has been replaced with JS5(Too lazy to upgrade), I'm using the TNZ CSC for Telecom XT and Speedmod(K13A). Seems to work all fine and dandy, I'm sure the newer Doc Rom (JS5) would provide better performance and would do fine, CSC is really dependant on whether your Voda or XT(VNZ or TNZ). I think Speedmod is more aimed at stability compared to Voodoo but have only ever used Speedmod, and it is recommended.
While we are on the topic of CSCs I have a wee problem.
After flashing Darky's 9.2 last week have just realised I am not able to receive calls (I am on XT). The phone rings once and then the reception bars drop to nothing and the phone loses service. Once the call has been cut off, it all comes back up again.
I can make calls, send / receive text messages and get mobile data and connect to wireless. Phone suggests it is on the telecom network.
My CSC is JP9 (XEE).....before flashing it used to say (TNZ). I note some people have a CSC as XEU, as opposed to VNZ or TNZ, so thought having XEE wouldn't be an issue....and it might not be, but I am miffed as to why I can't receive calls.
Would appreciate any thoughts you good folks might have as to what might be causing this problem, or any suggestions how it fix it.
Thanks.
Have you checked your IMEI to make sure it's intact? It will be printed on a sticker behind the battery somewhere - you can check it on the phone by dialing *#06#. Make sure they match.
Thanks, yes had checked that. It's fine.
|
|
|