Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


mkeeley

26 posts

Geek
+1 received by user: 1


#244998 13-Jan-2019 16:15
Send private message

Hi,

 

I help out with the webcam setup at a local club ski field near Fairlie (Fox Peak). We have an old 3G router (WRT54G3G with Merlin U630 card) that connects to the Vodafone cell tower on Mt Michael.

 

It's clear line-of-sight to the tower, and the distance is about 20-22km. Yes, I realise that is a long way. We can get a "Good" GPRS signal, and can connect reliably, but over GPRS out transmit speed is only 1-2KBps. (kilobytes per second as measured by the FTP webcam image transfer speeds), and we have issues with transmission failures.

 

The card is a 3G card, but it won't establish a 3G connection. On the router, if I set the connection to "HSDPA/3G/UMTS only", it reports that it gets a "HSDPA/3G/UMTS" carrier, with "Good" signal strength, but it just won't establish a connection. It seems to be trying, but it doesn't succeed. 

 

We have just added an external antenna (see photo), but it doesn't seem to make much difference.

 

Is it maybe something to do with frequencies? Is the Mt Michael tower only 900MHz, and the card maybe only does 2100MHz (for UMTS/3G)? (according to a manual I found, but I'm not sure if that applies to the NZ version of the card).

 

Is it a protocol thing? I would think not, as it's a "NZ Vodafone" version of the card.

 

Does anyone have insight as to what might be preventing the connection on 3G?  An iPhone 4 in the same location as the router can get a good 3G signal (3/4 bars), sufficient for a Whatsapp call and remote access at the same time.

 

Cheers,

 

Mike.

 

Click to see full size

 

Click to see full size

 

 


View this topic in a long page with up to 500 replies per page Create new topic

This is a filtered page: currently showing replies marked as answers. Click here to see full discussion.

mkeeley

26 posts

Geek
+1 received by user: 1


  #2160370 13-Jan-2019 16:52
Send private message

sbiddle:

 

What do you mean by won't establish a connection? Does it connect and then not transfer data or not connect?

 

The device is so old it predates the 900Mhz 3G standard so doesn't support this. This would be the best band to be connecting on.

 

 

:-D yeah, I know it's super old.

 

When I say "won't connect", I mean at the 3G level. The "Mobile Connection" status on the "3G/UMTS" page goes from "Disconnected" to "Connecting...", but never gets to "Connected".

 

Would the Mt Michael tower only support 900MHz, or would it also support 2100MHz?




Jase2985
13732 posts

Uber Geek
+1 received by user: 6205

ID Verified
Lifetime subscriber

  #2160398 13-Jan-2019 17:47
Send private message

upgrade your gear, get a B315 and use that with a proper yagi like mentioned above


View this topic in a long page with up to 500 replies per page Create new topic








Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.