Fault,

Cannot make Incoming or Outgoing calls via Italk on Asterisk, stopped suddenly on Monday 15th  


My Italk lines on my Asterisk PBX ( Elastix FreePBX), these lines were working and have been for years, I have two other lines 2talk & Voipbuster, both work fine, I can "7777" and my ivr works fine as well

I rang Italk and they wont help as Asterisk is not a supported item...

I see some errors in the logs and I googled them

[Jul 17 12:58:26] VERBOSE[15772] app_dial.c: -- Called Italk /0800800xxx
[Jul 17 12:58:26] WARNING[2593] chan_sip.c: Received response: "Forbidden" from '"200" <sip:649271xxxx@203.184.52.xx>;tag=as204f031a'
[Jul 17 12:58:26] VERBOSE[15772] app_dial.c: -- SIP/Italk -0000007f is circuit-busy
[Jul 17 12:58:26] VERBOSE[15772] app_dial.c: == Everyone is busy/congested at this time (1:0/1/0)
[Jul 17 12:58:26] VERBOSE[15772] pbx.c: -- Executing [s@macro-dialout-trunk:21] NoOp("SIP/200-0000007e", "Dial failed for some reason with DIALSTATUS = CONGESTION and HANGUPCAUSE = 21") in new stack
[Jul 17 12:58:26] VERBOSE[15772] pbx.c: -- Executing [s@macro-dialout-trunk:22] Goto("SIP/200-0000007e", "s-CONGESTION,1") in new stack
[Jul 17 12:58:26] VERBOSE[15772] pbx.c: -- Goto (macro-dialout-trunk,s-CONGESTION,1)
[Jul 17 12:58:26] VERBOSE[15772] pbx.c: -- Executing [s-CONGESTION@macro-dialout-trunk:1] Set("SIP/200-0000007e", "RC=21") in new stack
[Jul 17 12:58:26] VERBOSE[15772] pbx.c: -- Executing [s-CONGESTION@macro-dialout-trunk:2] Goto("SIP/200-0000007e", "21,1") in new stack
[Jul 17 12:58:26] VERBOSE[15772] pbx.c: -- Goto (macro-dialout-trunk,21,1)
[Jul 17 12:58:26] VERBOSE[15772] pbx.c: -- Executing [21@macro-dialout-trunk:1] Goto("SIP/200-0000007e", "continue,1") in new stack
[Jul 17 12:58:26] VERBOSE[15772] pbx.c: -- Goto (macro-dialout-trunk,continue,1)
[Jul 17 12:58:26] VERBOSE[15772] pbx.c: -- Executing [continue@macro-dialout-trunk:1] GotoIf("SIP/200-0000007e", "1?noreport") in new stack
[Jul 17 12:58:26] VERBOSE[15772] pbx.c: -- Goto (macro-dialout-trunk,continue,3)
[Jul 17 12:58:26] VERBOSE[15772] pbx.c: -- Executing [continue@macro-dialout-trunk:3] NoOp("SIP/200-0000007e", "TRUNK Dial failed due to CONGESTION HANGUPCAUSE: 21 - failing through to other trunks") in new stack 


Trunk

type=friend
secret=xxxxx
username=64997xxxx
fromuser=64997xxxx
host=akl.italk.co.nz
dtmfmode=rfc2833
insecure=port,invite
nat=yes
canreinvite=no
disallow=all
allow=ulaw&alaw
qualify=yes

64997xxxxx:[password]@akl.italk.co.nz