Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


Taubin

592 posts

Ultimate Geek
+1 received by user: 243

ID Verified
Subscriber

#240765 24-Sep-2018 21:15
Send private message

Not sure where to put this, sorry it is the wrong place. My ERL decided to die on me tonight, and i needa replacement asap tomorrow. I know PB Tech carries them, but i want to avoid their cc fee, and the drive to manakau

Is there anyone else in Auckland, North Shore preferred that carries them? Thanks for any help. Sorry for any typos, on mobile. Cheers




ZL2TOY/ZL1DMP


Create new topic

This is a filtered page: currently showing replies marked as answers. Click here to see full discussion.

Taubin

592 posts

Ultimate Geek
+1 received by user: 243

ID Verified
Subscriber

  #2095894 25-Sep-2018 07:47
Send private message

mentalinc: If you reset it you need to connect to eth0 and start the config again

 

 

 

I'm aware of that, I've configured this router a few times. It never replied after assigning a static IP in it's subnet and attempting to connect to it, it wouldn't even reply to a ping.

 

 

 

This morning I was able to take it apart, and reflash the USB drive using instructions I found on the ubiquiti forums. It has come back up for now after doing that, so I'm going to say the flash card is going. I have ordered one from Amazon that everyone is stating works. I had tried another power supply, as well as resetting it a few times and it never replied to me at all.

 

I was able to download the system image from the one linked on this site: https://hilo90mhz.com/ubiquiti-edgerouter-lite-erlite-3-internal-usb-storage-fail/

 

I was then able to flash it using a usb imaging tool, which gave me a very old version of the software installed, but it was running. I've been able to reflash the current firmware with no problem, I'll just be sure to replace the usb drive as soon as this one is in from amazon: https://www.amazon.com/gp/product/B004UG41YQ/

 

Hopefully this helps anyone that runs into the same issue. I'll update once the usb card arrives from Amazon, and keep an eye on the one installed currently in the ERL.

 

Also sorry for the typo in the subject line, I was typing on my phone and it was hard to see.





ZL2TOY/ZL1DMP


Create new topic








Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.