2degrees gigabit service

Forums › 2degrees (including Slingshot, Orcon, Flip, Stuff Fibre, MyRepublic, 2talk and Vocus) › 2degrees gigabit service

1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | ... | 12

1400 posts

Uber Geek
+1 received by user: 252

Trusted

#1646317 6-Oct-2016 07:01

Aredwood: Check your PPP username. If it is simply "username" instead of username@snap.net.nz speed profile changes don't apply properly. I found this out the hard way when I moved from 100/50 to 200/200 I ended up with 100/200

This issue of profile not being applied properly seems to have hung around since forever. I experienced it myself when changing from 30/10 to 100/50 a couple of years ago. I wonder how many customers are impacted and don't even realise.

nitrotech

1285 posts

Uber Geek
+1 received by user: 168

#1646331 6-Oct-2016 08:08

Aredwood: Check your PPP username. If it is simply "username" instead of username@snap.net.nz speed profile changes don't apply properly. I found this out the hard way when I moved from 100/50 to 200/200 I ended up with 100/200

Good thought however I've always had the @snap.net.nz in the username

merve0o0

492 posts

Ultimate Geek
+1 received by user: 10

#1646624 6-Oct-2016 13:31

I have a fritzbox 7360 and just upgraded to the gigabit plan. do I need to change the settings under " Connection Setting" for Data throughput? because I am unable to put enough digits in the field.

My speed tests are maxing at 380mbit up and down

https://www.speedtest.net/my-result/5691071400

Edit. I just updated the firmware on the fritzbox and it allowed me to put 1Gb into the data throughput field.

D1NZ

194 posts

Master Geek
+1 received by user: 14

#1647011 7-Oct-2016 04:04

I am also getting a 200 down / 534 up.

CPU: Intel Xeon E3-1225 V2 @ 3.20Ghz
RAM: A-data ECC 4GB x 2 1600MHz
SSD: Samsung 840 Pro 120GB
Motherboard: Intel S1200KPR server board mini-ITX
NIC: Intel Ethernet Server Adapter I350-T2

D1NZ

194 posts

Master Geek
+1 received by user: 14

#1647012 7-Oct-2016 04:19

merve0o0:

I have a fritzbox 7360 and just upgraded to the gigabit plan. do I need to change the settings under " Connection Setting" for Data throughput? because I am unable to put enough digits in the field.

My speed tests are maxing at 380mbit up and down

https://www.speedtest.net/my-result/5691071400

Edit. I just updated the firmware on the fritzbox and it allowed me to put 1Gb into the data throughput field.

And result after updated firmware it's the same?

if so it might be router hardware just can't handle that much throughput pass NAT.

http://www.smallnetbuilder.com/tools/charts/router/bar/75-lan-to-wan

CPU: Intel Xeon E3-1225 V2 @ 3.20Ghz
RAM: A-data ECC 4GB x 2 1600MHz
SSD: Samsung 840 Pro 120GB
Motherboard: Intel S1200KPR server board mini-ITX
NIC: Intel Ethernet Server Adapter I350-T2

D1NZ

194 posts

Master Geek
+1 received by user: 14

#1647215 7-Oct-2016 12:04

All sorted, Thank you Ralph

CPU: Intel Xeon E3-1225 V2 @ 3.20Ghz
RAM: A-data ECC 4GB x 2 1600MHz
SSD: Samsung 840 Pro 120GB
Motherboard: Intel S1200KPR server board mini-ITX
NIC: Intel Ethernet Server Adapter I350-T2

HP

Shop now for HP laptops and other devices (affiliate link).

2degreesCare

1537 posts

Uber Geek
+1 received by user: 274

Trusted

2degrees

#1647257 7-Oct-2016 13:14

No worries D1NZ, enjoy :)

Ralph ^JOB

ekul

89 posts

Master Geek
+1 received by user: 10

#1647381 7-Oct-2016 16:24

Same issue here.. 200 down.. 450 up

Call center so painful, trying to say its on my side in my router

nitrotech

1285 posts

Uber Geek
+1 received by user: 168

#1647434 7-Oct-2016 18:03

ekul:
Same issue here.. 200 down.. 450 up

Call center so painful, trying to say its on my side in my router

With mine (and yours may be a different issue) basically I just have to wait as it appears there's still some work that 2d need to do at each of the handover points to enable 1g download

ekul

89 posts

Master Geek
+1 received by user: 10

#1647441 7-Oct-2016 18:11

May be the case but 2Deg we're pretty sure it was on my side yet they wanted to log a case to Chorus and make me pay a fee unless it wasn't on their side. lol...

I had the same problem when going to 200/200 .. only had 100/200 after about 3 phone calls got to the right person at 2deg who fixed it in 2 mins

nitrotech

1285 posts

Uber Geek
+1 received by user: 168

#1647450 7-Oct-2016 18:44

ekul:
I had the same problem when going to 200/200 .. only had 100/200 after about 3 phone calls got to the right person at 2deg who fixed it in 2 mins

Yep went through exactly the same thing back in the day

Apple TV

Stream your favourite shows now on Apple TV (affiliate link).

ekul

89 posts

Master Geek
+1 received by user: 10

#1647461 7-Oct-2016 19:30

Well that was fun..

Made it through to their Tier 2 team.

Apparently they don't set a profile for Upload and have no ability to do so (Chorus Managed)

They do have a profile they set for down speed.

As a test he changed me back to 30 down, confirmed that worked and was getting 29 on speed tests, he then flicked it to 999 i re-ran speed tests and the tests reported back to 200.

Factory reset, same behavior.

Made me go across the road with my Router to my brother who is on gigabit and test it there.. 870 down on speed test.

Quite clearly not an issue with my Router and they're stumped, but also confirmed gigabit is definitely rolled out and available at my address

Sounds like they're going to send Chorus to take a look and I have to accept the risk that if Chorus find nothing wrong i'll have to pay the call out fee.

I will be pissed if Chorus find nothing wrong, the problem is on 2Degrees side and I still have to pay, wonder if they cover the cost then? Only fair right..

Edit: They've logged the fault with Chorus and I won't be charged either way.

nitrotech

1285 posts

Uber Geek
+1 received by user: 168

#1647472 7-Oct-2016 20:29

ekul:

Have sent you a message - hope it helps

maslink

131 posts

Master Geek
+1 received by user: 41

Subscriber

#1647619 8-Oct-2016 09:33

ekul:

Same issue here.. 200 down.. 450 up

Call center so painful, trying to say its on my side in my router

And here...200 down, 430up.

Happy to give it some time to come right, not exactly crimping my style at the moment, and to be honest it was the increased upload speed I was mainly looking for (was on 200/20)

ekul

89 posts

Master Geek
+1 received by user: 10

#1647688 8-Oct-2016 14:12

Chorus came back no fault.

2Degrees determined issue is definitely on my side and that my 'modem' (router) is not capable , even though its been tested and confirmed it can do so without issue across the road.

Understand it may be a provisioning issue and just not complete yet, but 2Deg are certain it is complete and that there is a fault on my end.

They are sending me a router next week to test

1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | ... | 12