Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


HairyScot

182 posts

Master Geek
+1 received by user: 1


#281482 20-Feb-2021 19:27
Send private message

I have a Sky satellite dish with twin LNBs. Since we now only have one Sky box I thought I'd use the second LNB to getFreeview on our Samsung QA55Q6FNA,
After scrolling through the list of 81 satellites and deselecting all but Optus D1 I eventually got a list of 10 channels - all of them  versions of TV1.
Then I spotted something called Freeview SAT which gave me a list of 16 channels, but unfortunately when I try to use them I get a "No signal" banner.

 

I'm obviously missing something, but I have no idea what.

 

Any info or advice would be greatly appreciated.

 

 


Create new topic

This is a filtered page: currently showing replies marked as answers. Click here to see full discussion.

snnet
1413 posts

Uber Geek
+1 received by user: 556


  #2660186 20-Feb-2021 19:31
Send private message

Is the TV region set to NZ?

 

Your settings need to reflect Freeview Sat (not just Freeview and not just Sat) 

 

Have you got the correct LNB settings?

 

Correct frequency? 10750 or 11300 MHz

 

From the internet:

 

->->-> LNB Power = On
->->-> LNB Settings
->->->-> Satellite = Optus D1 160E
->->->-> Transponder = 12483 MHz, H/L
->->->-> DiSEqC Mode = Off
->->->-> LNB Type = Single Oscillator
->->->-> LNB Oscillators = 10750 Mhz
->->->-> Tone 22 kHz = Off

 

 


Create new topic








Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.