Issue with Arrowhead Alarm Elite S

Forums › Home Workshop DIY › Issue with Arrowhead Alarm Elite S

Mojomelon

7 posts

Wannabe Geek

#245272 26-Jan-2019 21:08

Hi all.
Ive recently just DIYed an alarm system in my house, I have the ESL App kit installed as welll, everthing is up and running but just one thing, does any one ever get its notification function working on their phone? Coz mine doesnt seem to work like it shoud :/

Volt

45 posts

Geek
+1 received by user: 17

#2168214 26-Jan-2019 23:28

did you connect the line in on the alarm panel to the correct terminals on the ip module? you will also have to make sure that the diailer is enabled with a dummy phone number ie 123, and set to contact id

Mojomelon

7 posts

Wannabe Geek

#2168219 27-Jan-2019 02:04

Yeah. Ive everything set up, and a code “DIAL” showing on the LCD screen.
I also noticed the phone relay seem to open and close after i enabled the dialer. As i can hear it “ticking” every minute and so.

gregmcc

2173 posts

Uber Geek
+1 received by user: 836

ID Verified

Trusted

Lifetime subscriber

#2168222 27-Jan-2019 06:10

it looks like a configuration issue with the IP module as it's not sending the expected signal to the alarm, that's why there is a DIAL error on the alarm.