Ring Doorbell Elite - Install into weatherboard

Forums › Home Workshop DIY › Ring Doorbell Elite - Install into weatherboard

wallymal

11 posts

Geek

#319620 14-May-2025 08:49

Hi Geekers,

Looking for tips from anyone that has successfully installed a ring doorbell elite into weatherboard? I've seen posts on other forums about aftermarket wedgekits overseas available but wanted to know from someone who actually has done it successfully here in NZ.

I have the PoE connection in place already.

Thanks

johno1234

3352 posts

Uber Geek
+1 received by user: 2843

#3372980 14-May-2025 08:53

Weatherboard wedges are a thing. Just cut one of these down to suit:

https://thelightingoutlet.co.nz/products/weatherboard-packer-mounting-accessories-superlux-lighting-wbp110-wbf110-wbp145-wbf145

https://thelightingcentre.co.nz/product-category/exterior-lighting/exterior-accessories/weatherboard-wedges/

wallymal

11 posts

Geek

#3376457 24-May-2025 22:41

Thanks for this. I want to try avoid cutting a hole in to the weather board if I can avoid it, as Im afraid it might cause weather tightness issues. Has anyone installed the ring elite on a surface mounted custom made box?

Bung

6733 posts

Uber Geek
+1 received by user: 2926

Subscriber

#3376470 25-May-2025 09:29

wallymal: I have the PoE connection in place already.

Where does this appear if you don't want to drill into the weatherboard?

wallymal

11 posts

Geek

#3376636 25-May-2025 21:01

I have a sole cat6 cable penetrating through the weatherboard

Goosey

3016 posts

Uber Geek
+1 received by user: 870

Subscriber

#3376646 26-May-2025 06:54

I find this outdoor rated mounting tape is the best of the best.

signwritters best friend…(was recommended it by a reputable signwritter)

It is very strong if you prepare the surface properly…

https://www.bunnings.co.nz/scotch-mount-2-5cm-x-1-5m-extreme-double-sided-mounting-tape_p0323823?srsltid=AfmBOor7itPX8P1Px_NDjWjLQJcZlIw48PKYNOJqK6KMQcgoqltxE_bj