No sound from Blu-Ray Player

Forums › Home Theatre (including HTPC and EPG Collector) › No sound from Blu-Ray Player

unclerichard

17 posts

Geek
+1 received by user: 1

#198104 27-Jun-2016 06:31

I have just purchased a 2026 Panasonic TH50DX740U TV ste. The set operates perfectly on the Freeview Tuner, but when I connect my Lazer Blu-Ray DVD player while a get an excellent picture there is no sound. On the set I have connected the Optical to a coberter that send the sound to my speakers. When I connect the DVD player there is no sound even through the set's speakers. I have consulted the manuals for both and altered the audio settings for both as recommended without success.

Can anyone suggest further avenues to explore?

Other settings I might use?

Could it be the HDMI cable?

Many thanks

Goosey

2852 posts

Uber Geek
+1 received by user: 750

Subscriber

#1580833 27-Jun-2016 07:02

On your bluray player, where are the leads going to? I assume HDMI out is going to the TV. What about the other outputs, please explain where your optical is going to and/from again?

Batman

Mad Scientist
29827 posts

Uber Geek
+1 received by user: 6089

Trusted

Lifetime subscriber

#1580834 27-Jun-2016 07:10

You don't need to touch your tv settings. The problem is likely before the tv. Concentrate on your bluray player settings.

Batman

Mad Scientist
29827 posts

Uber Geek
+1 received by user: 6089

Trusted

Lifetime subscriber

#1580835 27-Jun-2016 07:11

Why do you need a converter to send sound to your tv

robjg63

4110 posts

Uber Geek
+1 received by user: 1370

Subscriber

#1580845 27-Jun-2016 07:41

joker97: Why do you need a converter to send sound to your tv

Presumably does not have a home theatre/amp.

Have you disconnected the optical from your gizmo's, then tried the DVD straight into an HDMI port?
Switch the TV and DVD off then turn them both back on and try after disconnecting the optical.
Any joy?

Nothing is impossible for the man who doesn't have to do it himself - A. H. Weiler