iMon remote codes for Mediaportal

Forums › Home Theatre (including HTPC and EPG Collector) › iMon remote codes for Mediaportal

kiwijunglist

2981 posts

Uber Geek

ID Verified

#22873 10-Jun-2008 20:17

Finally got mediaportal running smoothly even on TV3.

Now I need to integrate mediaportal with my iMon remote, has anyone done all the hardwork and mapped out all the codes?

Cheers
Mike

SYSTEM SPEC
4600 CPU
AMD 78G MB
2GB RAM
HVR 2200
SILVERSTONE CASE
WINDOWS VISTA 64 SP1

To get everything running smoothly i did the following

Fornat everything
Install Windows Vista 64Bit
Install SP1
Install all 4x drivers on the gigabyte CD
Install HVR2200 drivers
Install PowerCinema 5.1
Install Mediaportal
Select The cyberlink h264 PCM codec for mediaportal
System Ghosted the install

HTPC / Home automation (home assistant) enthusiast.

Disrespective

1925 posts

Uber Geek

#137165 10-Jun-2008 21:11

I have these files that i've used to set up my iMon remote before. Have a read through it all and see if you can decipher it. If you can't get it working, then there is a post on the MediaPortal forums where i got it all.

http://www.filedropper.com/imonremotemappingsformediaportal

duckquack

75 posts

Master Geek

#137178 10-Jun-2008 21:38

Mike,

Try these links:

http://forum.team-mediaportal.com/htpc-projects-42/silverstone-lascala-lc16-m-complete-guide-8043/

or here

http://forum.team-mediaportal.com/htpc-projects-42/silverstone-lascala-lc16-m-complete-guide-8043/

I haven't used this info yet, however like yourself I'm currently building a LC16M based system using the IMON remote, however I'm still awaiting the final green light from the big boss (wife) before purchasing the last few components.

Good luck and hopefully these links help.