Hello Guys,

Ive just been gifted Inno3D TV7100 USB2.0 TV Tuner and i am hoping you could tell me if i could use it to view DVB-T properly or not? It does mention that it supports DVB-T but i am not sure how to work around with it. Following are a list of its features:

Features
¡¤ Compact Pen-size USB 2. 0 Terrestrial TV Receiver for
DVB-T
¡¤ USB 2.0 High speed data transmission
¡¤ Full DVB-T and NorDig Unified Standards compliant
¡¤ Auto-Select 6, 7, 8MHz Channel bandwidth
¡¤ Real Time and Scheduled Program recording
¡¤ Time Shifting functionality
¡¤ Multi channels preview support
¡¤ Multi-Language support
¡¤ Video Capture and Snapshot
¡¤ Microsoft® Windows® Vista™ Premium ready
¡¤ IR remote control for video application
Specification
General:
¡¤ PC-Interface: USB 2.0 compliant
¡¤ Input Terminal: 75 Ohm
¡¤ Receiving frequency: 48.25 ~ 863.25 MHz tuning range
¡¤ Dimension: 77mm(L) x 23mm(W) x 14mm (T)
¡¤ 30 keys IR remote control for video application control
DVB-T:
¡¤ Digital TV standard: ETS300744 DVB-T & Nordic Unified standard Compliance
¡¤ Modulation / De-multiplexing: 16QAM / 64QAM / Software
¡¤ Video Resolution support: up to 720 x 480 (NTSC), 720 x 576 (PAL)
¡¤ Video Decoding: MPEG-2 software decode
¡¤ Video Bit rate: Constant Bit Rate (CBR) and Variable Bit Rate (VBR) support
¡¤ Picture Aspect Ratio: 4:3 or 16:9
¡¤ Audio Decoding: MPEG Layer 1 and Layer 2
¡¤ Audio Sampling Rate: 32KHz, 44.1KHz or 48KHz
¡¤ Video frequency band support: Full 47 ~ 860MHz frequency range for VHF and UHF
¡¤ Channel Bandwidth: 6, 7, 8MHz
¡¤ OFDM Demodulation: 2K / 8K for SFN or MFN
¡¤ Modulation: QPSK, 16QAM or 64QAM Constellations support
¡¤ Type of carrier: 2K / 8K
¡¤ Guard interval: 1 / 4 , 1 / 8, 1 / 16, 1 / 32