can't complete GUI configuration because i don't know the area code

Forums › Home Theatre (including HTPC and EPG Collector) › can't complete GUI configuration because i don't know the area code

kiwijunglist

2983 posts

Uber Geek
+1 received by user: 135

ID Verified

#72653 30-Nov-2010 15:53

Hi

I want to use DVB-T Christchurch Sugar Loaf

Region = 5120

but i have no idea what the area code is

The GUI setup requires this on the first setup tab under General

Also I noted an error in one of the sample files which uses NLZ instead of NZL

HTPC / Home automation (home assistant) enthusiast.

SJB

2945 posts

Uber Geek
+1 received by user: 2287
Inactive user

#411660 1-Dec-2010 16:38

You don't need any of the location data for Terrestrial Freeview.

The samples have all been redone for the next version.

Steve

kiwijunglist

2983 posts

Uber Geek
+1 received by user: 135

ID Verified

#411663 1-Dec-2010 16:46

cool yeah it seemed to work in the end without, thanks.

i found all the instructional threads on geekzone quite confusing party because they are out of date, and not really needed as there is a GUI configuration utility.

HTPC / Home automation (home assistant) enthusiast.

SJB

2945 posts

Uber Geek
+1 received by user: 2287
Inactive user

#411665 1-Dec-2010 16:50

A lot of the posts on here are from users who started when there was no GUI so set the parameters up manually. They are a different format.

Support is focussed on Sourceforge now - I just happened to be passing and noticed your post.

Steve

kiwijunglist

2983 posts

Uber Geek
+1 received by user: 135

ID Verified

#411666 1-Dec-2010 16:53

cheers steve, after the next release i should probably message the geekzone owner and ask him to alter his stickied guide/post on the forum. It makes things unnecessarily complicated

HTPC / Home automation (home assistant) enthusiast.

SJB

2945 posts

Uber Geek
+1 received by user: 2287
Inactive user

#411669 1-Dec-2010 16:58

That's a good point, I'd forgotten about that document.

It will definitely need rewriting when the next version comes out as it's moved on a lot even from 2.17