Vdsl Huawei Hg659 Configuration

Forums › Spark New Zealand (including Skinny and BigPipe) › Vdsl Huawei Hg659 Configuration

Ryuken

19 posts

Geek

#151769 4-Sep-2014 15:12

Hi guys I really need someones help I have been trying all day to setup my Modem for Vdsl but no success when I plug in the ethernet to wan port into the back of pc I get the internet light blinking but if i take it out of these put into lan light goes off but even plugged into wan and into back of pc I get error at local area connection that says "Local Area Connection" Doesnt have a valid Ip configuration

Please help me I really want this to work

Spyware

3261 posts

Uber Geek

Lifetime subscriber

#1121902 4-Sep-2014 15:19

WAN interface on router connects to the Internet not your PC. Given VDSL connection the router obviously has a VDSL interface so the Ethernet WAN interface can be ignored. PC connects to a LAN interface.

Spark Max Fibre using Mikrotik CCR1009-8G-1S-1S+, CRS125-24G-1S, Unifi UAP, U6-Pro, UAP-AC-M-Pro, Apple TV 4K (2022), Apple TV 4K (2017), iPad Air 1st gen, iPad Air 4th gen, iPhone 13, SkyNZ3151 (the white box). If it doesn't move then it's data cabled.

Sharesies kids

Free kids accounts - trade shares and funds (NZ, US) with Sharesies (affiliate link).

Coil

6614 posts

Uber Geek
Inactive user

#1121911 4-Sep-2014 15:21

Hi,

Try the VDSL cable in the DSL port and the PC 1-4 Ethernet ports. Configure the VDSL line in the advised options under Admin/VF-NZhg659.
Edit the VDSL with PPP credentials. Change the IPOE to PPP Over Ethernet.

Cheers

Ryuken

19 posts

Geek

#1121917 4-Sep-2014 15:30

Vdsl cable would be the yellow Cat5e? I use a similiar but 20m version that same since i need to use jackpoint in kitchen and run to my room

Coil

6614 posts

Uber Geek
Inactive user

#1121918 4-Sep-2014 15:31

Ryuken: Vdsl cable would be the yellow Cat5e? I use a similiar but 20m version that same since i need to use jackpoint in kitchen and run to my room

What ever cable comes from where Chorus terminated the dedicated jack point. It uses a RJ11 cable. It will fit in a RJ45 socket.

Ryuken

19 posts

Geek

#1121929 4-Sep-2014 15:37

The Dsl port is same size a rj11 to bigpipe for Cat5e ethernet cable

Coil

6614 posts

Uber Geek
Inactive user

#1121932 4-Sep-2014 15:39

Ryuken: The Dsl port is same size a rj11 to bigpipe for Cat5e ethernet cable

Something like that.
As long as WAN is solid your good to go, internet light flashing means its configured OK.

Ryuken

19 posts

Geek

#1121940 4-Sep-2014 15:45

Thing is once I plug the Cat5e Cable into the blue Wan port of the modem the Wan says solid green and the internet light starts blinking so I go check pc and gives error local area connection doesnt have valid ip configuration error and I cant access the Huawei modem page on 192.168.1.1 while connected to the Wan blue port

Coil

6614 posts

Uber Geek
Inactive user

#1121944 4-Sep-2014 15:46

Put some blue tack in the WAN port as you CANT use it for VDSL. It is only for Ethernet up link.

Spyware

3261 posts

Uber Geek

Lifetime subscriber

#1121965 4-Sep-2014 16:10

DSL port is RJ11. WARNING: Connecting VDSL run to RJ45 Ethernet WAN port will potentially cause damage to the device.

sbiddle

30853 posts

Uber Geek

Retired Mod

Trusted

Biddle Corp

Lifetime subscriber

#1121980 4-Sep-2014 16:26

You plug your DSL into the DSL port, not the WAN port.

Plugging DSL into a WAN port can fry the router, they have a tendency to not like 45V DC on Ethernet pins.

Ryuken

19 posts

Geek

#1121990 4-Sep-2014 16:39

Oh no only thing i put in wan was my grey Cat5e ethernet cable Not rj11 also managed to access admin account for Huawei Hg659 but many thing to change but thing is Im getting dns and invalid ip errors in local area connection

xpd

aka Fast Raccoon !
13016 posts

Uber Geek

Retired Mod

ID Verified

Trusted

Lifetime subscriber

#1121994 4-Sep-2014 16:43

Sounds like it needs a reset - find the factory reset option in the interface.
It should set it back to the defaults and go from there...

Gavin / xpd / FastRaccoon / Geek of Coastguard New Zealand

LinkTree - kiwiblast.co.nz - Lego and more

Support Kiwi music! The People Black Smoke Trigger Like A Storm Devilskin

NZ GEEKS Discord______________________________

Ryuken

19 posts

Geek

#1121998 4-Sep-2014 16:47

TimA: Hi,

Try the VDSL cable in the DSL port and the PC 1-4 Ethernet ports. Configure the VDSL line in the advised options under Admin/VF-NZhg659.
Edit the VDSL with PPP credentials. Change the IPOE to PPP Over Ethernet.

Cheers

Couldnt see the Ipoe to Ppp Over Ethernet any change you have a picture of that settings? I see in internet options are Dsl access type connection and ethernet access type both says disconnected and I have the ethernet plugged in back of pc

Ryuken

19 posts

Geek

#1122019 4-Sep-2014 17:20

TimA: Hi,

Try the VDSL cable in the DSL port and the PC 1-4 Ethernet ports. Configure the VDSL line in the advised options under Admin/VF-NZhg659.
Edit the VDSL with PPP credentials. Change the IPOE to PPP Over Ethernet.

Cheers

This ultimately got my connection going since working from like 8am this morning till now I just only get it working thanks to everyone that helped me through this much appreciated thanks guys