Does anyone have the settings required to connect to VDSL? I saw there were a few previous forums about this, but the links to the settings have expired. Any help greatly appreciated.

Dual wan is set to off
Primary wan set to Ethernet wan LAN port 4

Wan connection: PPPOE
Enable wan: Yes
Enable Nat: Yes
Enable upnp: Yes
802.1q Enabled
Vlan ID: 10
802.1p: 0

Get wan ip automatically: yes
Connect to dns server auto: yes
PPP username: aaa
Password: aaa
Mtu 1492
Mru 1492