[WXC/VFX] Provisioning config not working?

Forums › One NZ (including Farmside) › [WXC/VFX] Provisioning config not working?

DrCheese

382 posts

Ultimate Geek
+1 received by user: 32

Trusted

#139178 30-Jan-2014 11:51

For various reasons I needed to factory re-set my SPA2102 ATA. I use Open VFX. After entering the provisioning URL http://58.28.20.69/configs/default/default$MA.cfg, no changed are made to the configuration on the ATA. I followed the helpful video setup guide on the WxC website, so yes, Provision Enable is set to "yes".

Is the provisioning URL functioning?

Cheers,

David.

maverick

3594 posts

Uber Geek
+1 received by user: 80

Trusted

WorldxChange

#977255 30-Jan-2014 11:53

The guys are taking a look now

Yes I am a employee of WxC (My Profile) ... but I do have my own opinions as well

https://www.facebook.com/wxccommunications

grudge

266 posts

Ultimate Geek
+1 received by user: 26

#977261 30-Jan-2014 11:57

Hi DrCheese,

The auto-provisioning will only work on the certified service, not on OpenVFX, as there is no config for your number.

Your SPA2102 is a certified device, so if you want to benefit the auto-provisioning feature you will need to change service type from OpenVFX to Certified, this is something our sales team can assist with.

Regards,
Andrei.

DrCheese

382 posts

Ultimate Geek
+1 received by user: 32

Trusted

#977271 30-Jan-2014 12:07

grudge: Hi DrCheese,

The auto-provisioning will only work on the certified service, not on OpenVFX, as there is no config for your number.

Your SPA2102 is a certified device, so if you want to benefit the auto-provisioning feature you will need to change service type from OpenVFX to Certified, this is something our sales team can assist with.

Regards,
Andrei.

Thanks Andrei. I'll play around with it and set it up manually. More fun that way. Brings out the inner geek in me.

Cheers,

David.

grudge

266 posts

Ultimate Geek
+1 received by user: 26

#977285 30-Jan-2014 12:17

If you get stuck (especially on the dial plans) have a look at this entry http://www.geekzone.co.nz/sbiddle/7208

DrCheese

382 posts

Ultimate Geek
+1 received by user: 32

Trusted

#977293 30-Jan-2014 12:25

grudge: If you get stuck (especially on the dial plans) have a look at this entry http://www.geekzone.co.nz/sbiddle/7208

Yep. I already had that bookmarked. Sbiddle used to have an Linksys SPA NZ configuration on his web site but it disappeared a while back. But it is certainly possible to enter everything manually from the xml data kindly shown on the web site.

I might end up getting back to you as incoming calls fail after about an hour, although outgoing calls work just fine.

Cheers,

David.

grudge

266 posts

Ultimate Geek
+1 received by user: 26

#977305 30-Jan-2014 12:38

Sure, if you have any issues, flick me a PM with a call example and I'll check it out.

New World

Shop on-line at New World now for your groceries (affiliate link).

DrCheese

382 posts

Ultimate Geek
+1 received by user: 32

Trusted

#977327 30-Jan-2014 12:58

Thanks grudge. The ATA is re-registering with VFX every 300 seconds, although it is set for a registration expiry of 3600 seconds. After the second registration incoming calls were diverted to my cell phone (which is how I've set it up in the event of a power failure or an inability to register).

I set Provision Enable to "no", which is really where it should be considering that there is no provisioning URL entered. The problem seems to be solved now.

Cheers,

David.