[WXC/VFX] USR 9108 - PAP2T 'Can't connect to login server'

Forums › One NZ (including Farmside) › [WXC/VFX] USR 9108 - PAP2T "Can't connect to login server"

bjorn

192 posts

Master Geek
+1 received by user: 1

#23296 24-Jun-2008 20:26

Hey I having some issues with my PAP2T connecting through my USR 9108. On the PAP2T I get the error message "Can't connect to login server" which I find weird as it was able to download the cfg file just fine and get the time and date.

Any ideas guys?

coffeebaron

6304 posts

Uber Geek
+1 received by user: 3566

Trusted

Lifetime subscriber

#140303 24-Jun-2008 20:38

Starting with the simple: have you restarted both USR router and PAP2T?

Next, try PAP2T in the DMZ zone.

Rural IT and Broadband support.

Broadband troubleshooting and master filter installs.
Starlink installer - one month free: https://www.starlink.com/?referral=RC-32845-88860-71
Wi-Fi and networking
Cel-Fi supply and installer - boost your mobile phone coverage legally

Need help in Auckland, Waikato or BoP? Click my email button, or email me direct: [my user name] at geekzonemail dot com

bjorn

192 posts

Master Geek
+1 received by user: 1

#140314 24-Jun-2008 21:18

Cheers for the hints coffee though it was a bit more that that.

After doing some research I found that the USR 9108 has a SIP Proxy and it does not work well or at all

I had to telnet into my router and do the following:

> siproxd show
siproxd: SIP proxy is enabled.
> siproxd disable
> siproxd show
siproxd: SIP proxy is disabled.

And then I rebooted the router.. After that it connect straight away.

More info found here:

http://forums.italk.co.nz/viewtopic.php?t=1050

Hope this helps anyone else with a USR 9108

maverick

3594 posts

Uber Geek
+1 received by user: 80

Trusted

WorldxChange

#140358 25-Jun-2008 05:55

nice work in finding that, 99% of all issues are router based the problem being most router manufacturers don't do SIP well so Natting and SIP is pretty poorly implemented which causes most problems.

Again nice work in finding and sharing that info

Yes I am a employee of WxC (My Profile) ... but I do have my own opinions as well

https://www.facebook.com/wxccommunications