I've recently (few weeks back, just got time to come up for air) set up an asterisk (trixbox) for vfx. After early hickups things seem to
have settled down, except for one last snag...
No incoming calls.
Steve Biddle has been very helpful with ironing out the bumps, but we couldn't figure out the 'no incoming calls'. He suggested
a registration problem and thought it had been a hickup in the past with vfx & I should look for past posts, this came up:
Calls out are fine.
What makes me suspicious about registration is trixbox admin > PBX > PBX Settings > Admin : System Status shows:
IP Trunk Registrations 0
From the cli I get:
trixbox1*CLI> sip show registry
Host Username Refresh State Reg.Time
as.wxcnz.net:5060 register=995 120 Rejected
1 SIP registrations.