[WXC/VFX] XNet and 3CX

Forums › One NZ (including Farmside) › [WXC/VFX] XNet and 3CX

albertgouws

5 posts

Wannabe Geek

#75587 20-Jan-2011 07:56

Hi All,

I recently got my account switched to the open vfx, received all the info to get an asterisk setup going.

I was wondering if someone has this working with 3cx yet? I saw the posts from back in 2009 and was wondering if anything has changed?

Seems that I can get my trunk to register correctly, but still can't receive incoming calls. I haven't set up outgoing calls yet, I'll try that after I get incoming working.

I have also forwarded port 5060, and 10000 - 10100 (both TCP and UDP)

Any tips or Ideas would be appreciated.

Regards,
Albert

joshp

205 posts

Master Geek
+1 received by user: 1

Trusted

WorldxChange

#429066 20-Jan-2011 08:22

3CX does not yet support 3way authentication (which is required for VFX), they do have some alpha builds out at the moment that are testing this however.

http://wxc.co.nz

albertgouws

5 posts

Wannabe Geek

#429070 20-Jan-2011 08:43

Hi Josh,

Thanks for the quick reply.

I was reading this post and thought you had it very close to working:

http://www.geekzone.co.nz/forums.asp?forumid=65&topicid=36535

anyway, is there any way I can get hold of some of the later alpha builds to test this with?

Regards,
Albert