[TelstraClear] Getting cable into another room.

Forums › One NZ (including Farmside) › [TelstraClear] Getting cable into another room.

Zach

167 posts

Master Geek

#8698 22-Jul-2006 16:09

When telstra came, they only installed one connection in our living room that has a splitter. I need to have one in the computer room and was wondering how I should do this. I was thinking the cheapest and easiest way would be to buy a really long ethernet cord and run it from the living room to the computer room. I haven't gone ahead with this plan though because it is kinda a lazy way of doing it. You guys would probably recommend getting a whole new connection put into the computer room so I don't lose any quality.
Would I be losing any signal strength/quality if I use the tv and internet on the splitter that telstra installed?

Word of warning for Byw*fi users (video accelerator); it uses a lot of P2P traffic.

freitasm

BDFL - Memuneh
80646 posts

Uber Geek
+1 received by user: 41025

Administrator

ID Verified

Trusted

Geekzone

Lifetime subscriber

#42236 22-Jul-2006 16:56

Why not a cheap Wi-Fi router from DSE (they work really well), and either a Wi-Fi PCI card (if the other computer is a desktop) or a USB Wi-Fi adapter (also available from DSE).

No cables. No pain with those things running aroundthe house.

Referral links: Quic Broadband (free setup code: R587125ERQ6VE) | Samsung | AliExpress | Wise | Sharesies

Support Geekzone by subscribing (browse ads-free), or making a one-off or recurring donation through PressPatron.

Zach

167 posts

Master Geek

#42245 22-Jul-2006 18:10

Well if we had wires we would run it through the ceiling. We are probably going to get a wireless router but it would be setup like this:

But do you think I should buy a PCI card for my pc? I thought that would be less stable. Could I still use the pc as an access point then and stream music to my psp?
What dse wireless router are you talking about?

Word of warning for Byw*fi users (video accelerator); it uses a lot of P2P traffic.

freitasm

BDFL - Memuneh
80646 posts

Uber Geek
+1 received by user: 41025

Administrator

ID Verified

Trusted

Geekzone

Lifetime subscriber

#42246 22-Jul-2006 20:58

No problems in the diagram. I though you wanted to extend a cable to another room, to connect a desktop. If the desktop is in the same room as the router/modem then it's fine. My suggestion of going wi-fi on the desktop as well is just if you want it in another room, without extending a cable.

Referral links: Quic Broadband (free setup code: R587125ERQ6VE) | Samsung | AliExpress | Wise | Sharesies

Support Geekzone by subscribing (browse ads-free), or making a one-off or recurring donation through PressPatron.

Zach

167 posts

Master Geek

#42247 22-Jul-2006 21:00

The pc and modem wouldn't be in the same room, the cable between them would be the long one.

Word of warning for Byw*fi users (video accelerator); it uses a lot of P2P traffic.

freitasm

BDFL - Memuneh
80646 posts

Uber Geek
+1 received by user: 41025

Administrator

ID Verified

Trusted

Geekzone

Lifetime subscriber

#42248 22-Jul-2006 21:02

That's why I suggested wireless LAN all the way. Either this, or you will have to extend a cable under the house or in the roof, or have a cable going through the hall from one room to another...

Referral links: Quic Broadband (free setup code: R587125ERQ6VE) | Samsung | AliExpress | Wise | Sharesies

Support Geekzone by subscribing (browse ads-free), or making a one-off or recurring donation through PressPatron.

Zach

167 posts

Master Geek

#42274 23-Jul-2006 19:45

Well today I got a Belkin Wireless Network Starter Kit which has a wireless g router and a usb adapter for $100. I had it running for a while but when I went to setup the security I reseted the router and ran the configuration cd but it doesn't work.

That's the options but none of them actually fit my criteria (cable, nz) so I just choose the first one right? I'm leaving my router off for 40 minutes because the "Easy install wizard" said that's what to do if you get an error...

Word of warning for Byw*fi users (video accelerator); it uses a lot of P2P traffic.

HP

Shop now for HP laptops and other devices (affiliate link).

freitasm

BDFL - Memuneh
80646 posts

Uber Geek
+1 received by user: 41025

Administrator

ID Verified

Trusted

Geekzone

Lifetime subscriber

#42275 23-Jul-2006 20:25

I will have to pass, I didn't use a wizard at all - I do have a Belkin, but I manually configured it. Wizards sometimes change more things than we need to.

Referral links: Quic Broadband (free setup code: R587125ERQ6VE) | Samsung | AliExpress | Wise | Sharesies

Support Geekzone by subscribing (browse ads-free), or making a one-off or recurring donation through PressPatron.

Zach

167 posts

Master Geek

#42276 23-Jul-2006 20:34

Ohk, that sound's like a good idea. I may try that.

Edit: I did it manually and it's working now :D

Thanks for your help.

Word of warning for Byw*fi users (video accelerator); it uses a lot of P2P traffic.

KellyP

1250 posts

Uber Geek
+1 received by user: 115

ID Verified

Subscriber

#42364 25-Jul-2006 10:14

Zach: When telstra came, they only installed one connection in our living room that has a splitter. I need to have one in the computer room and was wondering how I should do this. I was thinking the cheapest and easiest way would be to buy a really long ethernet cord and run it from the living room to the computer room. I haven't gone ahead with this plan though because it is kinda a lazy way of doing it. You guys would probably recommend getting a whole new connection put into the computer room so I don't lose any quality.
Would I be losing any signal strength/quality if I use the tv and internet on the splitter that telstra installed?

http://reviews.cnet.com/4520-7605_7-1023478-1.html?tag=dir

sbiddle

30853 posts

Uber Geek
+1 received by user: 9996

Retired Mod

Trusted

Biddle Corp

Lifetime subscriber

#42365 25-Jul-2006 10:23

Has anybody got any comments on the cheap $99 Belkin wireless routers or the $149 combo pack with USB adapter? The price is obviously good and they have had reasonable reviews but D-Link gear can get good reviews as well and make crap!

KellyP

1250 posts

Uber Geek
+1 received by user: 115

ID Verified

Subscriber

#42368 25-Jul-2006 10:32

sbiddle: Has anybody got any comments on the cheap $99 Belkin wireless routers or the $149 combo pack with USB adapter? The price is obviously good and they have had reasonable reviews but D-Link gear can get good reviews as well and make crap!

Which ones are you talking about?

this?

http://www.noelleeming.co.nz/webapp/wcs/stores/servlet/ProductDisplay?storeId=10001&catalogId=10001&productId=64556&crumb=10005-10198-10661

My advice would be to go Pre-N/N-Draft.

Quic Broadband

Move to New Zealand's best fibre broadband service (affiliate link). Free setup code: R587125ERQ6VE. Note that to use Quic Broadband you must be comfortable with configuring your own router.

Zach

167 posts

Master Geek

#42437 25-Jul-2006 18:18

Yep, that'll be the one. I got that one but I got it for $99 instead of $149. I haven't had it long enough to recommend it or not though.

Word of warning for Byw*fi users (video accelerator); it uses a lot of P2P traffic.