Can't connect to login serverto Disable SIP ALG

Forums › VoIP › Can't connect to login serverto Disable SIP ALG

JoeRandom

43 posts

Geek
+1 received by user: 1

#142460 13-Mar-2014 19:07

I can't get my PAP2T to connect to the 2talk log in server i have a DSE XH9949 4 port modem/router my connection is through Bigpipe I opened a support ticket with 2talk who told me to to Disable SIP ALG with this guide http://www.tp-link.com/ca/article/?faqid=343 as a xh9949 is just a re-branded TD8840 that did nothing. I evin reflashed my router with TPlink firmware still no luck it will not accept the command any ideas ?

sbiddle

30853 posts

Uber Geek
+1 received by user: 9996

Retired Mod

Trusted

Biddle Corp

Lifetime subscriber

#1005148 13-Mar-2014 19:34

Bigpipe uses CG-NAT. That is very likely breaking your SIP connection.

chevrolux

4962 posts

Uber Geek
+1 received by user: 2638
Inactive user

#1005224 13-Mar-2014 21:25

As above, because you have a dirt cheap connection from Bigpipe you will be behind CG-NAT. This breaks stuff.

Have a go at configuring STUN on the pap2t. You can use stun.2talk.co.nz

JoeRandom

43 posts

Geek
+1 received by user: 1

#1005462 14-Mar-2014 11:25

Ok so that being said why dose is all of a sudden work with a borrowed THOMSON 585 v7 on my bigpipe conection?

chevrolux

4962 posts

Uber Geek
+1 received by user: 2638
Inactive user

#1005465 14-Mar-2014 11:31

Because of a SIP ALG in the TP-Link most probably.