Hi.
I have recently connected an SPA 3102 to my asterisk solution. I am looking to utilise the FXO interface to connect to an ISDN2. Simple question will this work or will the PSTN interface have to be a POTS line?
I have the solution cabled up but cant pick up dial tone from the ISDN line, it is cabled between the ISDN2 to the FXO port as below.
ISDN --> RJ45 (straight) --> Straight Through Coupler --> RJ11(2wire) --> FXO
I get fluctauting voltage readings on the SPA 3102 so I beleive it may be wiring problem or a problem with the housing of the RJ11 end in the RJ45 coupler.
Any suggestions or ideas are appreciated.
Thanks,
Ian