Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


MrMarkT

16 posts

Geek


#212718 9-Apr-2017 08:08
Send private message

Hi there,

 

 

 

I am currently configuring a 5505 v 9.1.(7)9 with pppoe to replace my current nighthawk device (will use it as a hub/ap) although i cannot seem to get any internet connectivity. (100/20)

 

 

 

I have gone through the following steps listed here  http://www.cisco.com/c/en/us/td/docs/security/asa/asa72/configuration/guide/conf_gd/pppoe.html

 

Int e0/0 is the outside interface

 

 

 

interface Ethernet0/0

 

switchport access vlan 10

 

interface Vlan10

 

nameif outside

 

security-level 0

 

pppoe client vpdn group MDI/MDIX

 

ip address pppoe setroute

 

 

 

vpdn group MDI/MDIX request dialout pppoe

 

vpdn group MDI/MDIX ppp authentication pap


 

 

 

 I have created a dynamic nat and tried adding/not adding my vodafone username/password  although the same issue applies. 

 

 

 

Thoughts?


Create new topic

This is a filtered page: currently showing replies marked as answers. Click here to see full discussion.

MrMarkT

16 posts

Geek


  #1771089 27-Apr-2017 09:28
Send private message

Okay,

 

 

 

Figured it out and now i am giving back

 

 

 

I had to purchase a sec + lic from ebay to allow for assigning a trunk port to the int that is patched through to the ONT. (e0/0)

 

 

 

interface Ethernet0/0

 

switchport access vlan 10

 

switchport trunk allowed vlan 10

 

switchport mode trunk

 

interface Vlan10

 

description WAN

 

nameif outside

 

security-level 0

 

ip address dhcp setroute



Create new topic








Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.