Seems DSE is even getting in on the act. Lets do all we can to raise the noise floor!

They have a Bi-directional indoor booster that provides up to +27dBmW transmit power & 10dB receive gain. It is ideal for devices that operate in the 2.4GHz ISM band like 802.11b & 802.11g Wireless Network access points, broadband routers and interface cards & adaptors. Automatically switches between transmit and receive - provides up to 500mW output.

*Operating frequency range: 2400~2500MHz.
* Modes of operation: Bi-directional, half duplex, auto-switching via carrier sensing.
* Antenna Connector: RP-SMA, 50 Ohm nominal impedance.
* Radio Connector: SMA, 50 Ohm nominal impedance.
* Static protection: Tuned stub provides direct DC ground path to help reduce damage from antenna static.
* DC surge protection: Onboard high current, low dropout regulator protects over-voltage input from AC Adaptor.
* Frequency response: +⁄- 1dB over operating range.
* Input power range: +6dBmW ~ +20dBmW (maximum).
* Output power: 500mW (+27dBmW).
* Transmit gain: 17dB nominal.
* Receive gain: 10dB typical.
* Material: Cast aluminum.