Zyxel P-870H-51A status page after bridge

Forums › LAN (ethernet/Wifi/routers/Bluetooth) › Zyxel P-870H-51A status page after bridge

pinkydot

247 posts

Master Geek

#141405 11-Mar-2014 17:15

I'm trying to get the Zyxel status page to work after bridge.
But keep getting unable to connect to 192.168.1.1

I bridge it with a TPLink flash to gargoyle firmware (192.168.2.1)

Setting from the zyxel
On Wan, Set the layer 2 interface in VLAN MUX mode
Set up the WAN interface for bridging
Tag VLAN 10
That's all.
Is there anymore setting I missed???

All the PCs, tablets, phones have it's own IP address 192.168.2.xxx
None of them conflicting.

Before that I use the telecom tg589vn v2 bridging too but able to get into the tg589vn status page easily without any settings, when I use any of my devices that with 192.168.2.xxx

Please help and thanks in advance.

sbiddle

30853 posts

Uber Geek

Retired Mod

Trusted

Biddle Corp

Lifetime subscriber

#1002923 11-Mar-2014 17:24

That's just the standard bridge setup and you'll be able to get to it on 192.168.1.1

I assume you're setting an IP on your PC to the 192.168.1.0/24 range to get into it? Your'e not going to be able to get into it from behind your router unless you get a static route to 192.168.1.0/24

pinkydot

247 posts

Master Geek

#1002932 11-Mar-2014 18:19

sbiddle: That's just the standard bridge setup and you'll be able to get to it on 192.168.1.1

I assume you're setting an IP on your PC to the 192.168.1.0/24 range to get into it? Your'e not going to be able to get into it from behind your router unless you get a static route to 192.168.1.0/24

Yeah I have to set an IP on the PC 192.168.1.xx to get into it.
If I use those IP that I set on 192.168.2.xxx then can't get into it.
Can teach me how to set up static route? So I can access the zyxel status page from those 192.168.2.xxx IP.
Try google but still don't understand how it works.

sbiddle

30853 posts

Uber Geek

Retired Mod

Trusted

Biddle Corp

Lifetime subscriber

#1002952 11-Mar-2014 19:10

You would need to set a static route in gargoyle. No idea in the world how to do it because I've never touched it.

Spyware

3763 posts

Uber Geek

Lifetime subscriber

#1002988 11-Mar-2014 20:06

On the Zyxel go to Advanced/Static Route/IP Static Route. Add the route back to the gargoyle, i.e., 192.168.2.0, 255.255.255.0, gateway is whatever IP address is on WAN interface of gargoyle device.

Spark Max Fibre using Mikrotik CCR1009-8G-1S-1S+, CRS125-24G-1S, Unifi UAP, U6-Pro, UAP-AC-M-Pro, Apple TV 4K (2022), Apple TV 4K (2017), iPad Air 1st gen, iPad Air 4th gen, iPhone 13, SkyNZ3151 (the white box). If it doesn't move then it's data cabled.