Geekzone: technology news, blogs, forums
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.

62 posts

Master Geek

Topic # 14633 12-Jul-2007 21:48
Send private message

AND THIS IS NOT SELECTED: Optional Settings:Nothing written in!!!!!Router IP:Network AddressServer Settings (DHCP):DDNS SERVICE: DISABLEDAdvanced Routing:Operating Mode: ....... NAT .... ENabledDynamic Routing: STATIC ROUTING::Select Set Number: Destination IP Address: NONESubnet Mask: NONEGateway: NONEHop Count: GAteway Information:Internet Connection: (CURRENTLY WORKING) DSL CONNECTION:PVC Connection: 

Create new topic
BDFL - Memuneh
62033 posts

Uber Geek
+1 received by user: 12645

Lifetime subscriber

Reply # 77912 12-Jul-2007 21:49
Send private message

Welcome to Geekzone. It would be great if you could help us help you...

What's the problem? We cant' figure an answer out without knowing what you want to do, what's not working...

62 posts

Master Geek

Reply # 77915 12-Jul-2007 21:53
Send private message

Well I just wrote that huge page out and it didnt come up properly but i copied it all can i send it through a email or something???


62 posts

Master Geek

Reply # 77919 12-Jul-2007 22:11
Send private message

Im On a slingshot Express Everyday 25GB plan and a dlink modem one of those free ones that i got off a friend internet kept cutting out and thought it was because the modem was so cheap went to dse powerhouse and said i wanted the best wireless modem they offered me a dink one or a linksys and i wasnt very keen on the dlink, so got the linksys one its a wireless-g adsl home gateway all in one solution... says its ADSL2/2+ modem, internet-sharing router, 4 port switch and wireless-g access point. the model number is WAG200G and i have set up the slingshot settings on the linksys settings page "" e.g etc etc even though thats not the address but an example. any way its much better but it still cuts out now and then but im sure i dont have the settings correct but i have no idea what to do i tried getting the settings of the slingshot website and found them but had no idea what to do with them msn sometimes says theirs some kind of dns error or something but not very sure i dont know how someone coud help but im up for any suggestions etc... please help!!

p.s ive also got the Encapsulation: on RFC 2364 PPPoA
Multiplexing: on VC not LLC
PCR rate and SCR rate on nothing
Virtual Circuit: ..... VPI = 0 ....... VCI = 100 ...
DSL Modulation: T1.413

PPPoA Settings: ... Username: ******* Password: ********

Connect on Demand: Max Idle Time Minutes

AND THIS IS NOT SELECTED: Keep Alive: Redial period Seconds

Optional Settings:
Host Name:
Domain Name:
MTU: Auto Manual
Nothing written in!!!!!

Router IP:

Local IP Address: . . .
Subnet Mask:

Network Address
Server Settings (DHCP):

DHCP Server: Enable Disable DHCP Relay
DHCP Server: . . .
Starting IP Address: 192.168.1.

Maximum Number of
DHCP Users:
Client Lease Time: minutes (0 means one day)
Static DNS 1: . . .
Static DNS 2: . . .
Static DNS 3: . . .
WINS: . . .


Advanced Routing:

Operating Mode: ....... NAT .... ENabled

Dynamic Routing: RIP:
Transmit RIP Version:

Receive RIP Version:
Enabled Disabled
RIP1 RIP1-Compatible RIP2 Disable

RIP1 RIP2 Disable


Select Set Number: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Destination IP Address: NONE
Subnet Mask: NONE
Gateway: NONE
Hop Count:


GAteway Information:

Firmware Version: 1.01.01
MAC Address: 00:18:39:3C:19:43
Current Time: 2007-07-12 21:43:30

Internet Connection: (CURRENTLY WORKING)

Login Type RFC 2364 PPPoA
Interface: Up
IP Address:
Subnet Mask:
Default Gateway:


DSL Status: Connected
DSL Modulation Mode: T1.413
DSL Path Mode: Interleaved
Downstream Rate: 5600 kbps
Upstream Rate: 160 kbps
Downstream Margin: 9 db
Upstream Margin: 30 db
Downstream Line Attenuation: 45 db
Upstream Line Attenuation: 14.5 db
Downstream Transmit Power: 0
Upstream Transmit Power: 0

PVC Connection:

Encapsulation: RFC 2364 PPPoA
Multiplexing: VC
Qos: UBR
Pcr Rate: 0
Scr Rate: 0
Autodetect: Disable
VPI: 0
VCI: 100
Enable: Yes
PVC Status: Up

Create new topic

Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:

Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:

Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:

Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.

Geekzone Live »

Our community of supporters help make Geekzone possible. Click the button below to join them.

Support Geezone on PressPatron

Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.