Just moved into a house and it has a micron alarm that has 0 seconds entry delay, but the master code has been lost and I am unable to re-programme it, just wondering if anyone knows how to reset it to factory settings? Calling someone to come to reset it during business hour is $95, it sounds ridiculous.
Depends on model - but this is for the Z6 for example:
LOST MASTER CODE? Pressing the [1+3] key pair within 6 seconds of power-up will cause the program version number to be displayed (as if you had just entered the master code). From this point, enter the desired programming command (# for installer programming). If no programming command is entered, the control will reset to normal operation in a few seconds. This sequence will work only from true power-up. Battery and AC power must be removed then restored. Note: This command is not available in communicator versions of the Z6 panel.
I had to get an alarm technician to come in, and they had to get the panel to dial out to micron so that micron could do a remote reset on mine - all the manual offline options didn't work because some protection code had been set....
Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly
to your computer or smartphone by using a feed reader.