Universal RF (916MHz) with Home assistant support

Forums › Gadgets, robotics, home automation, electronics (including wearables) › Universal RF (916MHz) with Home assistant support

stevemnz

17 posts

Geek
+1 received by user: 1

#320077 3-Jul-2025 11:14

I have a louver roof that appears to operate on the 916MHz frequency, I am after a universal remote that can integrate into Home Assistant so I can control it through HA.

I looked at the Broadlink RM4pro, but its only in the 433MHz range, has anyone found a universal RF remote that works on 916MHz?

Linux

12173 posts

Uber Geek
+1 received by user: 8469

Trusted

Lifetime subscriber

#3389451 3-Jul-2025 13:34

916Mhz is that in the cellular range?

richms

29097 posts

Uber Geek
+1 received by user: 10206

Trusted

Lifetime subscriber

#3389453 3-Jul-2025 13:42

No, its in the 915-928MHz general user band.

Richard rich.ms

Linux

12173 posts

Uber Geek
+1 received by user: 8469

Trusted

Lifetime subscriber

#3389454 3-Jul-2025 13:48

richms:

No, its in the 915-928MHz general user band.

You are correct just checked that

stevemnz

17 posts

Geek
+1 received by user: 1

#3389456 3-Jul-2025 13:54

Linux:

richms:

No, its in the 915-928MHz general user band.

You are correct just checked that

I had to double-check that as well! There is a R-NZ sticker so should be all good! Just hard to find a universal remote/hub for HA that supports that frequency

richms

29097 posts

Uber Geek
+1 received by user: 10206

Trusted

Lifetime subscriber

#3389458 3-Jul-2025 13:55

Linux:

You are correct just checked that

You might be aware of meshtastic that operates in that band too?? /s

Richard rich.ms

richms

29097 posts

Uber Geek
+1 received by user: 10206

Trusted

Lifetime subscriber

#3389459 3-Jul-2025 13:56

stevemnz:

I had to double-check that as well! There is a R-NZ sticker so should be all good! Just hard to find a universal remote/hub for HA that supports that frequency

If you can get the remote open and see what chip is uses and the resonator and other components along side it, that can go a long way to finding things that will control it. If its just a blob tho...

Richard rich.ms