FS: Antec Fusion Media Center

To post in this sub-forum you must have made 100 posts or have Trust status or have completed our ID Verification

Forums › Offers and Wanted › FS: Antec Fusion Media Center

rphenix

987 posts

Ultimate Geek
+1 received by user: 125

Lifetime subscriber

#185460 23-Nov-2015 21:18

I have an antec fusion media center I think its got a Phenom X3 cpu, and board inside, cant remember GPU but it would be a lower end one as I wanted a passive setup for low noise.

Also have a small credit card style Media center remote to go with it. Offers ? Was using it with XBMC but havent used it in 12 months at least.

Pickup in Glenfield.

PeterReader

6024 posts

Uber Geek
+1 received by user: 456

Trusted

Geekzone

Lifetime subscriber

#1433544 23-Nov-2015 21:18

Hey, have you listed a price, location and how much shipping would be to other parts of New Zealand? Also if you are asking for a PM make sure your Privacy settings allow your account to receive PM otherwise people can't contact you. Also note if you are selling something we ask you to offer to other members first. Links to private sales (including Trade Me posts) aren't accepted anymore and will be removed.

I am the Geekzone Robot and I am here to help. I am from the Internet. I do not interact. Do not expect other replies from me.

Please support Geekzone by subscribing, or using one of our referral links: Quic Broadband (free setup code: R587125ERQ6VE) | Samsung | AliExpress | Wise | Sharesies

fastmikey

291 posts

Ultimate Geek
+1 received by user: 12

ID Verified

#1433629 23-Nov-2015 23:44

Any OS, and any pics?

rphenix

987 posts

Ultimate Geek
+1 received by user: 125

Lifetime subscriber

#1433669 24-Nov-2015 08:02

Really not sure whats loaded on it currently - will have to check. I'll load some pictures tonight.

timbosan

2172 posts

Uber Geek
+1 received by user: 266

#1433678 24-Nov-2015 08:27

Hi, could you please find more details - confirmation of the CPU, RAM (DDR3?), model of case, PSU, etc.

rphenix

987 posts

Ultimate Geek
+1 received by user: 125

Lifetime subscriber

#1434984 26-Nov-2015 09:51

I know the CPU is a Phenom X3 - but what I'm not sure. DDR2 ram but I didn't check the ram amount - I can scrounge up some extra ram if your after a certain amount. There is no HDD installed currently but can provide a 500GB drive with it if wanted.

Basically not worried about getting much for this just want the case in particular to go to a good home as its a nice setup with LCD display I just dont use media centers anymore.

I believe this is the board based on the writing I can make out of the model number in the photo.

richms

28343 posts

Uber Geek
+1 received by user: 9325

Trusted

Lifetime subscriber

#1434989 26-Nov-2015 09:56

How much were you thinking?

Richard rich.ms

rphenix

987 posts

Ultimate Geek
+1 received by user: 125

Lifetime subscriber

#1434992 26-Nov-2015 09:59

$50? otherwise make me an offer

Wise

Send money globally for less with Wise - one free transfer up to NZ$900 (affiliate link).

timbosan

2172 posts

Uber Geek
+1 received by user: 266

#1435001 26-Nov-2015 10:04

Does the VFD work with XBMX (and therefore Kodi)? Its a nice case and I am on the lookout for HTPC case.

richms

28343 posts

Uber Geek
+1 received by user: 9325

Trusted

Lifetime subscriber

#1435003 26-Nov-2015 10:05

What's the height of it? The stand I would be putting it in is limited in what it can take.

Richard rich.ms

rphenix

987 posts

Ultimate Geek
+1 received by user: 125

Lifetime subscriber

#1435006 26-Nov-2015 10:16

richms: What's the height of it? The stand I would be putting it in is limited in what it can take.

I googled it as not home - apparently 14.5cm tall and measuring just the case - removing the rubber/plastic feet its 13.5cm. I'll confirm that for you later.

rphenix

987 posts

Ultimate Geek
+1 received by user: 125

Lifetime subscriber

#1435007 26-Nov-2015 10:19

timbosan: Does the VFD work with XBMX (and therefore Kodi)? Its a nice case and I am on the lookout for HTPC case.

I haven't used it with a recent release - so no idea how well it works without fluffing around - I do remember having dramas often in particular with getting the remote receiver to work after updates in Ubuntu which is what i was running XBMC on so I stopped updating to avoid issues.

I would think by now support is better given the product is a bit older but you would have to try it to find out.

rphenix

987 posts

Ultimate Geek
+1 received by user: 125

Lifetime subscriber

#1435060 26-Nov-2015 11:15

Hi Everyone this is now sold.

Thanks

richms

28343 posts

Uber Geek
+1 received by user: 9325

Trusted

Lifetime subscriber

#1435064 26-Nov-2015 11:22

Damn, well if it falls thru I am keen too.

Richard rich.ms