6.30 Firmware for Fritzboxs available now

Forums › 2degrees (including Slingshot, Orcon, Flip, Stuff Fibre, MyRepublic, 2talk and Vocus) › 6.30 Firmware for Fritzboxs available now

gorringS

71 posts

Master Geek
+1 received by user: 6

#179253 2-Sep-2015 08:46

Hi everyone just wondering anyone upgrade their fritzbox with new firmware yet apparently available as of hour ago approximately ?

1 | 2 | 3

523 posts

Ultimate Geek
+1 received by user: 151
Inactive user

#1378040 2-Sep-2015 08:49

Not yet. Will do it tonight.

Here is to hoping it has fixed my DECT CLI problem.

Anywhere where I can see the release notes in English?

Oblivian

7345 posts

Uber Geek
+1 received by user: 2117

ID Verified

#1378044 2-Sep-2015 09:04

Since mine was not on provisioning correctly, its been added to their management pool which runs customised beta.

So be warned this could break things if you overwrite..
(especially as it appears overseas VoIP provider changes)

Updates - http://en.avm.de/service/downloads/download/show/18857/

Andib

1395 posts

Uber Geek
+1 received by user: 974

ID Verified

Trusted

#1378051 2-Sep-2015 09:11

Looks like 6.30 will disable Telnet??

"Access to the FRITZ!Box via Telnet is no longer supported"

http://en.avm.de/service/downloads/download/show/18857/

<#
.DISCLAIMER
Anything I post is my own and not the views of my past/present/future employer.
#>

DizzyD

523 posts

Ultimate Geek
+1 received by user: 151
Inactive user

#1378096 2-Sep-2015 10:21

Andib: Looks like 6.30 will disable Telnet??

"Access to the FRITZ!Box via Telnet is no longer supported"

http://en.avm.de/service/downloads/download/show/18857/

Never realized there was a telnet option to the Fritzbox.
Does it support ssh?

surfisup1000

5288 posts

Uber Geek
+1 received by user: 2159

#1378099 2-Sep-2015 10:24

My fritzbox works perfectly now, I'll let snap push this out if they decide to do so.

DizzyD

523 posts

Ultimate Geek
+1 received by user: 151
Inactive user

#1378454 2-Sep-2015 17:47

Upgraded when I got home. Nothing much changed.

Still experiencing the Caller ID issue on my Panasonic DECT phone. Was hoping that this would have been fixed!

Lenovo

Shop now for Lenovo laptops and other devices (affiliate link).

sbiddle

30853 posts

Uber Geek
+1 received by user: 9996

Retired Mod

Trusted

Biddle Corp

Lifetime subscriber

#1378455 2-Sep-2015 17:53

DizzyD: Upgraded when I got home. Nothing much changed.

Still experiencing the Caller ID issue on my Panasonic DECT phone. Was hoping that this would have been fixed!

What problem?

sidefx

3775 posts

Uber Geek
+1 received by user: 1295

Trusted

#1378462 2-Sep-2015 18:10

DizzyD: Upgraded when I got home. Nothing much changed.

Still experiencing the Caller ID issue on my Panasonic DECT phone. Was hoping that this would have been fixed!

if you mean caller id doesn't work I doubt this is an issue on the AVM side of the equation...

"I was born not knowing and have had only a little time to change that here and there." | Octopus Energy | Sharesies
- Richard Feynman

DizzyD

523 posts

Ultimate Geek
+1 received by user: 151
Inactive user

#1378475 2-Sep-2015 18:30

sidefx:
DizzyD: Upgraded when I got home. Nothing much changed.

Still experiencing the Caller ID issue on my Panasonic DECT phone. Was hoping that this would have been fixed!

if you mean caller id doesn't work I doubt this is an issue on the AVM side of the equation...

I wrote about it in this thread as well:

I have successfully registered my 7490 Fritz Box with a new Panasonic KX-TG2721 (got it free with flybuys and it apparently includes DECT-GAP). Configured as a DECT phone. Its all working very well except for the caller ID.

When connected via the RJ11 ports as a standard analogue phone the Caller ID works. Anybody found a solution to the caller ID problem yet?

Otherwise are there any other recommended Panasonic DECT phones out there that work properly?

Edit: PS I'm with 2talk.

sidefx

3775 posts

Uber Geek
+1 received by user: 1295

Trusted

#1378521 2-Sep-2015 20:23

According to Wikipedia:

"GAP-conformance enables DECT handsets and bases from different manufacturers to interoperate at the most basic level of functionality, that of making and receiving calls."

I'm not sure what the actual GAP spec says, but by the sounds of the above, things like caller id aren't part of it. I believe more expensive phones (siemens/gigaset(?) etc) do support caller ID with the fritzbox, but I wasn't all that surprised when my panasonics didn't because, well, you get what you pay for.

"I was born not knowing and have had only a little time to change that here and there." | Octopus Energy | Sharesies
- Richard Feynman

eXDee

4033 posts

Uber Geek
+1 received by user: 1070

Trusted

#1378571 2-Sep-2015 21:30

Finally!

Apple TV

Stream your favourite shows now on Apple TV (affiliate link).

zaphodwka

2 posts

Wannabe Geek
+1 received by user: 1

#1379617 4-Sep-2015 11:20

Updated this morning. No problems and I'm on VDSL2 (made an account just to post this for the benefit of those who might be nervous about updating on VDSL, since just about everyone here seems to have fibre). I'm connected to an Ikanos DSLAM.

Smithy47

235 posts

Master Geek
+1 received by user: 56

ID Verified

Trusted

Lifetime subscriber

#1379919 4-Sep-2015 17:44

I updated to 6.30 last Sat. So far it seems good and Webb pages seem to load faster. I am on fibre.

Smithy

UncleArthur

197 posts

Master Geek
+1 received by user: 65

#1380058 4-Sep-2015 23:49

Just updated my 7490. My VDSL download sync speed has jumped from 31mbit/s to 33mbit/s.
Cool, all take that thanks.

Homer: "Son, you tried and you failed....the lesson is...never try"

Falloutboy

50 posts

Geek

#1380288 5-Sep-2015 15:57

Andib: Looks like 6.30 will disable Telnet??

"Access to the FRITZ!Box via Telnet is no longer supported"

http://en.avm.de/service/downloads/download/show/18857/

I'm not much up on this but does that mean that freetz will no longer work?

Geek out.

1 | 2 | 3