About to swap to a Ubiquity AMPLIFI from a MR NF4V

Forums › 2degrees (including Slingshot, Orcon, Flip, Stuff Fibre, MyRepublic, 2talk and Vocus) › About to swap to a Ubiquity AMPLIFI from a MR NF4V - settings check

Ramjet99

85 posts

Master Geek

#242214 16-Oct-2018 15:05

Noting the instructions on third party routers from MR, they say disable VLAN tagging.

I might be misunderstanding the terminology but my current working router wants to use VLAN 10? (VLAN Mux ID of 10)

michaelmurfy

meow
13216 posts

Uber Geek

Moderator

ID Verified

Trusted

Lifetime subscriber

#2108899 16-Oct-2018 15:14

MyRepublic is DHCP with no VLAN tagging.

See: https://www.geekzone.co.nz/forums.asp?forumid=49&topicid=174969

Also, *Ubiquiti ;)

Michael Murphy | https://murfy.nz
Referral Links: Quic Broadband (use R122101E7CV7Q for free setup)

Are you happy with what you get from Geekzone? Please consider supporting us by subscribing.
Opinions are my own and not the views of my employer.

GoodSync

GoodSync. Easily back up and sync your files with GoodSync. Simple and secure file backup and synchronisation software will ensure that your files are never lost (affiliate link).

Jase2985

13419 posts

Uber Geek

ID Verified

Lifetime subscriber

#2108900 16-Oct-2018 15:14

look at the box to the left of that one :)

MyRepublic

39 posts

Geek

Trusted

MyRepublic

#2108968 16-Oct-2018 16:35

If you're on a fibre connection you'll be wanting to use DHCP/IPoE as your connection method, without VLAN tagging. We only have the VLAN enabled (with ID of 10, priority of 0) for our VDSL connections.

Ramjet99

85 posts

Master Geek

#2109100 16-Oct-2018 20:12

Can confirm that, once firmware upgraded, it pretty much works with no further configuration. Connection, even without satellite units in place, seems better than my uap-ac lr unit.