Freeview reception problems 19 June

Forums › Freeview (DVB-T/DVB-S) › Freeview reception problems 19 June - after retune

mattwnz

20141 posts

Uber Geek

#104651 19-Jun-2012 17:10

We had to retune our freeview tuners today, after the frequencies changed on the 19th June. However I am not able to pick up tv one, and two is quite pixilated. I do have a big aerial on teh roof, and also a small aerial on my computers tuner, and they oth have the same problem. Anyone else had problems after the 19th June freeview retune?

1 | 2

20141 posts

Uber Geek

#643307 19-Jun-2012 17:22

OK, repositioned my internal aerial to a higher position, and can now pick up tv1. But the signal is nowhere near as strong. May have to repoint the external aerial when the weather improves. Suspect there will quite a few people who are having signal issues tonight.

D1023319

524 posts

Ultimate Geek

ID Verified

#643344 19-Jun-2012 18:22

FYI - i am in hataitai valley which is outside their official coverage area.
definitely loss of signal strength for TV3 and TV1.
I'll check connections though as the effect varies by TV set.

upperhutt4

1 post

Wannabe Geek

#643377 19-Jun-2012 18:57

We have JCMatthew freeview box model DVB-TB01, this afternoon been "retune", all went well then switched off.
But switch on again this evening, showing "Updating" on top right corner of the screen (already half hour). Only showing Channel 2, cannnot use any buttons even to switch off again, unless plug out from the power.
Anyone has similar problem and solution... thanks

sbiddle

30853 posts

Uber Geek

Retired Mod

Trusted

Biddle Corp

Lifetime subscriber

#643389 19-Jun-2012 19:23

mattwnz: We had to retune our freeview tuners today, after the frequencies changed on the 19th June. However I am not able to pick up tv one, and two is quite pixilated. I do have a big aerial on teh roof, and also a small aerial on my computers tuner, and they oth have the same problem. Anyone else had problems after the 19th June freeview retune?

TV1 and TV2 are on the same MUX. Theoretically you shouldn't really be able to only pick up one of these, such an issue would possibly tend to indicate a device issue rather than a singal one.

kiwiharry

1030 posts

Uber Geek

ID Verified

Subscriber

#643394 19-Jun-2012 19:29

Do you have any other devices with a RF modulator that you are looping the feed through?

If you can't laugh at yourself then you probably shouldn't laugh at others.

geekiegeek

2513 posts

Uber Geek
Inactive user

#643407 19-Jun-2012 19:48

sbiddle:
mattwnz: We had to retune our freeview tuners today, after the frequencies changed on the 19th June. However I am not able to pick up tv one, and two is quite pixilated. I do have a big aerial on teh roof, and also a small aerial on my computers tuner, and they oth have the same problem. Anyone else had problems after the 19th June freeview retune?

TV1 and TV2 are on the same MUX. Theoretically you shouldn't really be able to only pick up one of these, such an issue would possibly tend to indicate a device issue rather than a singal one.

I have the same issue on a tivo. 2 and 3 work fine but just a grey screen for 1. Need to have a closer look at it but having to work right now. I have direct, clear line of site to Kaukau so it shouldn't have any issues really.

geek4me

843 posts

Ultimate Geek

Trusted

Lifetime subscriber

#643408 19-Jun-2012 19:50

After retuning the Freeview signal of Haywards is stronger than before: Strength 95% (except Prime 91%), Quality 100% - I'm in Trentham Upper Hutt.

Equinox IT

Cloud spending continues to surge globally, but most organisations haven’t made the changes necessary to maximise the value and cost-efficiency benefits of their cloud investments. Download the whitepaper From Overspend to Advantage now.

sbiddle

30853 posts

Uber Geek

Retired Mod

Trusted

Biddle Corp

Lifetime subscriber

#643411 19-Jun-2012 20:04

There are some aerials out there optimised for the higher frequencies, so it'll be interesting to see overall how many experience issues.

JimmyH

2886 posts

Uber Geek

#643418 19-Jun-2012 20:24

mattwnz: We had to retune our freeview tuners today, after the frequencies changed on the 19th June. However I am not able to pick up tv one, and two is quite pixilated. I do have a big aerial on teh roof, and also a small aerial on my computers tuner, and they oth have the same problem. Anyone else had problems after the 19th June freeview retune?

It's working well for me - I could only pick up the TVNZ and TV3 muxes before - the kordia mux was impossible even on a new rooftop antenna with masthead amp. and the TV3 mux was a bit flaky. Now all three are rock solid, even on simple bunny ears in the upstairs bedroom.

One random thought, do you have a recent UHF aerial or are you using something that might not be optimised for the new frequencies?

knoydart

904 posts

Ultimate Geek

Trusted

#643420 19-Jun-2012 20:28

sbiddle: There are some aerials out there optimised for the higher frequencies, so it'll be interesting to see overall how many experience issues.

Getting some reports of installations with poor response at the new frequencies but not many.

davidcole

6029 posts

Uber Geek

Trusted

#643428 19-Jun-2012 20:48

Anyone know the frequncies for mt kaukau?

Previously known as psycik

Home Assistant: Gigabyte AMD A8 Brix, Home Assistant with Aeotech ZWave Controller, Raspberry PI, Wemos D1 Mini, Zwave, Shelly Humidity and Temperature sensors
Media:Chromecast v2, ATV4 4k, ATV4, HDHomeRun Dual
Server Host Plex Server 3x3TB, 4x4TB using MergerFS, Samsung 850 evo 512 GB SSD, Proxmox Server with 1xW10, 2xUbuntu 22.04 LTS, Backblaze Backups, usenetprime.com fastmail.com Sharesies Trakt.TV Sharesight

knoydart

904 posts

Ultimate Geek

Trusted

#643435 19-Jun-2012 20:54

Kaukau - 562, 578 & 594 MHz

Mediaworks, TVNZ & Kordia Muxs respectively

mattwnz

20141 posts

Uber Geek

#643436 19-Jun-2012 20:54

geekiegeek:
sbiddle:
mattwnz: We had to retune our freeview tuners today, after the frequencies changed on the 19th June. However I am not able to pick up tv one, and two is quite pixilated. I do have a big aerial on teh roof, and also a small aerial on my computers tuner, and they oth have the same problem. Anyone else had problems after the 19th June freeview retune?

TV1 and TV2 are on the same MUX. Theoretically you shouldn't really be able to only pick up one of these, such an issue would possibly tend to indicate a device issue rather than a singal one.

I have the same issue on a tivo. 2 and 3 work fine but just a grey screen for 1. Need to have a closer look at it but having to work right now. I have direct, clear line of site to Kaukau so it?shouldn't?have any issues really.

Mine is a tivo too, but it does seem to be fine now that I have moved the aerial. But I had the same problem with a Sony Tv tuner. I also went out and fixed the aerial one on my roof too, which is an older sky UHF aerial by rotating it a bit, and can now pick up 1 again. I am also in the hutt, so it seems there are a few people out there with similar problems in this area. The Ministry of Economic Development do have a freephone helpline open this week for this change.

davidcole

6029 posts

Uber Geek

Trusted

#643454 19-Jun-2012 21:06

knoydart: Kaukau - 562, 578 & 594 MHz

Mediaworks, TVNZ & Kordia Muxs respectively

Ta managed to get them from my tv as well.

EDIT: anyone on NextPVR want a new Mt Kaukau tuning .ini file here it is: http://forums.gbpvr.com/showthread.php?52289-NZ-FreeView-DVB-T-Channel-Changes&p=437488#post437488

plod

272 posts

Ultimate Geek

#643478 19-Jun-2012 21:29

geekiegeek:
sbiddle:
mattwnz: We had to retune our freeview tuners today, after the frequencies changed on the 19th June. However I am not able to pick up tv one, and two is quite pixilated. I do have a big aerial on teh roof, and also a small aerial on my computers tuner, and they oth have the same problem. Anyone else had problems after the 19th June freeview retune?

TV1 and TV2 are on the same MUX. Theoretically you shouldn't really be able to only pick up one of these, such an issue would possibly tend to indicate a device issue rather than a singal one.

I have the same issue on a tivo. 2 and 3 work fine but just a grey screen for 1. Need to have a closer look at it but having to work right now. I have direct, clear line of site to Kaukau so it shouldn't have any issues really.

When you triune TiVo, make sure you set it to forget previous settings, took 3 times to work it out

1 | 2