Set all the corerect things then go to the program name field, enter and Set the name, what do I do next, if I press the OK key it just reverts back to the name filed..
The manual leaves this bit out, no squence given.
ADKM: Yes, the Stop button sets the name but its getting out of the next screen. Only way I've found is to cursor left until that orange box appears - then OK. If you OK before that, everything is lost.
ADKM: Yeah... infuriating isn't it! Instead of OK cursor left 3 times. An Orange box saying something about Digital appears, then press OK.
B1GGLZ: Must be different to the BWT720 then. On mine it has prompts on the left side of screen saying which button to press and it's the stop button to set the name. OK button does same as yours and exits without saving. Did it on me first few attempts too until I actually read the prompts.
But I cant find any prompts on this page P26.
cb1: If you are timer recording from a Freeview channel, the program name will be applied to the recording automatically. It's really only if you are recording from AV1 that you may need to manually apply an input name.