Just installed Windows 10 on release and have questions... Post here

Forums › Microsoft Windows › Just installed Windows 10 on release and have questions... Post here

1 | ... | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | ... | 31

BDFL - Memuneh
79289 posts

Uber Geek

Administrator

ID Verified

Trusted

Geekzone

Lifetime subscriber

#1358430 4-Aug-2015 10:42

nathan:
freitasm: I think I know what's going on with Outlook not correctly opening anchor tags - such as http://www.geekzone.co.nz/forums.asp?forumid=48&topicid=144215&page_no=7#1358323

In Outlook if you click that link it will open the default browser without the #1358323 bit. If you copy the hyperlink in Outlook, do Window Key + R and enter the URL it will also not correctly pass the #1358323.

I tested this on Windows 7 and Windows 2012 and in both cases if you do Windows Key + R and paste the URL these OS will correctly pass the #1358323 anchor and open the page at the appropriate location.

It seems Windows 10 managed to break hyperlinks...

please put this feedback into Windows Feedback tool

I will also raise this internally

I already put in the Feedback tool before realising the problem was also in Windows + R, but there's no way to update notes in an existing feedback post to expand it a "how to reproduce it". Tried this morning and no go...

mentalinc

3238 posts

Uber Geek

Trusted

#1358572 4-Aug-2015 11:54

bonkas:
mentalinc: I tried to update my sister laptop yesterday and it requested a product key when running setup.exe from within windows. It does the check for updates then requests a prodct key... She has Windows 7 Home Premium "System" shows Windows is activated. I was using the same USB I've upgraded three pc's with

You need to make sure you are Upgrading Home to Home and Pro to Pro.

You may have been using Pro installation media to upgrade the home version?

Ah yes of course that was the issue, other machines had pro versions...

CPU: AMD 5900x | RAM: GSKILL Trident Z Neo RGB F4-3600C16D-32GTZNC-32-GB | MB: Asus X570-E | GFX: EVGA FTW3 Ultra RTX 3080Ti| Monitor: LG 27GL850-B 2560x1440

Quic: https://account.quic.nz/refer/473833 R473833EQKIBX

Batman

Mad Scientist
29766 posts

Uber Geek

Trusted

Lifetime subscriber

#1359062 5-Aug-2015 07:49

everytime i remove the language thing ("ENG") from showing at the right of the taskbar, after a few hours it comes back!

anyone get that?

ashtonaut

614 posts

Ultimate Geek

#1359066 5-Aug-2015 08:15

joker97: everytime i remove the language thing ("ENG") from showing at the right of the taskbar, after a few hours it comes back!

anyone get that?

How did you manage to remove it in the first place?

Reon

69 posts

Master Geek

#1359083 5-Aug-2015 08:42

joker97: everytime i remove the language thing ("ENG") from showing at the right of the taskbar, after a few hours it comes back!

anyone get that?

I've found that with both Windows 8 and 10 after sleeping and resuming a few times ENG returns then after a log off/log on or a reboot it disappears again.

nzkiwiman

2585 posts

Uber Geek

Subscriber

#1359194 5-Aug-2015 11:34

The Notification Area keeps on telling me I have notifications
So I open the notification area and - no notifications

Grr

NzBeagle

962 posts

Ultimate Geek

Trusted

#1359321 5-Aug-2015 12:57

Has anyone updated with Storage Spaces? I'm assuming the pool should remain untouched as the boot drive isn't part of this, but thought I'd confirm if anyone had experience with this.

Quic Broadband

Move to New Zealand's best fibre broadband service (affiliate link). Free setup code: R587125ERQ6VE. Note that to use Quic Broadband you must be comfortable with configuring your own router.

mdooher

Hmm, what to write...
1424 posts

Uber Geek

ID Verified

Trusted

Lifetime subscriber

#1359380 5-Aug-2015 13:44

At least the error messages are useful

Might leave it for now

Matthew

ashtonaut

614 posts

Ultimate Geek

#1359393 5-Aug-2015 14:05

I got the same error initially. Changing the system locale to en-us and running the installer again fixed it. Then once installed just change the locale back to en-nz.

Funnily enough, I got this error on one of my Win7 pro systems, but not the other.

nathan

5695 posts

Uber Geek
Inactive user

#1359426 5-Aug-2015 14:26

mdooher: At least the error messages are useful

Might leave it for now

people complained about hex error numbers so we fixed it

seriously, this is a known error that can be fixed by change your system locale to US

We will be updating the media creation tool so it tells you this properly rather than "something happened"

mdooher

Hmm, what to write...
1424 posts

Uber Geek

ID Verified

Trusted

Lifetime subscriber

#1359429 5-Aug-2015 14:28

nathan:
seriously, this is a known error that can be fixed by change your system locale to US

We will be updating the media creation tool so it tells you this properly rather than "something happened"

Cheers, thanks

Matthew

semigeek

1606 posts

Uber Geek

#1359437 5-Aug-2015 14:36

Has anyone had any problems where their computer goes into Sleep mode, and then approximately 30 seconds later, it wakes back up again without actually touching anything like a keyboard or mouse?

Brumfondl

1187 posts

Uber Geek

Trusted

#1359442 5-Aug-2015 14:45

semigeek: Has anyone had any problems where their computer goes into Sleep mode, and then approximately 30 seconds later, it wakes back up again without actually touching anything like a keyboard or mouse?

First though would be to check your network card is not set to wake the computer up.

edge

423 posts

Ultimate Geek

Trusted

Lifetime subscriber

#1359506 5-Aug-2015 16:05

semigeek: Has anyone had any problems where their computer goes into Sleep mode, and then approximately 30 seconds later, it wakes back up again without actually touching anything like a keyboard or mouse?

Sort of. My main issue was that the computer refused to sleep at all automatically. If I manually put it to sleep (usually at night) It was always lit up like a Xmas tree in the morning. What I don't know is how soon after going to sleep it actually woke up again. Searching the interweb thingie I found one option was to disable wake timers:

Settings > system > power and sleep > additional power settings > change when the computer sleeps > change advanced power settings > expand the "sleep" tree > expand "allow wake timers" and set to "disable"

This stopped it waking up again (but didn't fix the not sleeping issue) - however, I am not enough of a geek to know exactly what disabling wake timers was doing - i.e. whether there was some other disadvantage in disabling these timers. Someone with more knowledge than me would have to comment, or maybe you know that yourself.

BUT - getting back to the original issue of not going to sleep, the solution appeared to be to uninstall all the usb drivers in device manager individually and restart the computer to reinstall. This has totally fixed my "not going to sleep" issue. I have now just gone back and re-enabled wake timers just in case the usb re-installation has fixed that as well. I haven't done it overnight yet so cannot report on whether it will start waking up again after any length of time. Will report back if I find anything useful.

"It is useless to attempt to reason a man out of what he was never reasoned into."
— most commonly attributed to Jonathan Swift, author/theologian

MikeB4

18435 posts

Uber Geek

ID Verified

Trusted

#1359599 5-Aug-2015 18:25

In the last couple of days I have been getting a Display adapter stopped responding and successfully restarted errors on my Windows 10 PC (AMD GPU) and on my Surface 3 Windows 10(Intel chips) is anyone else getting this and any suggestions?

1 | ... | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | ... | 31