Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


Filter this topic showing only the reply marked as answer View this topic in a long page with up to 500 replies per page Create new topic
1 | 2 


17 posts

Geek


  # 1363476 12-Aug-2015 10:06
Send private message

ok so as it stands

disallow=all
allow=alaw&ulaw
type=peer
dtmfmode=rfc2833
fromdomain=pan.wxnz.net
fromuser=number with 0
host=pan.wxnz.net
insecure=invite,port
canreinvite=no
nat=yes
secret=secret
username=username
port=5070


type=peer
fromuser=09950xxxx
host=pan.wxnz.net
insecure=invite,port
canreinvite=no
nat=yes
secret=secret
username=username
port=5070


incoming calls only work when authentication string is like this

09950xxxx:secret:username@pan.wxnz.net

still have no outgoing, but incoming is crystal clear in both directions

266 posts

Ultimate Geek


  # 1363500 12-Aug-2015 10:39
One person supports this post
Send private message

Ok, so on that last call attempt, the INVITE we get from you has the following:

From: <sip:9950xxxx@pan.wxnz.net:5070>;


It should be:

From: <sip:09950xxxx@pan.wxnz.net:5070>;

So you are still missing a leading 0 somewhere in your configs.

PS. That's a call at 08:19AM, if you made any more outbounds since, I can't see them.



 
 
 
 


28266 posts

Uber Geek

Moderator
Trusted
Biddle Corp
Lifetime subscriber

  # 1363516 12-Aug-2015 10:57
Send private message

Why do you have two lots of settings? Are you using both peer and user fields? Settings are only required in peer.

You are also still using a 0 in your number. As explained this is incorrect.

NAT=yes also functions differently in newer versions of Asterisk so you need to use the appropriate option.





266 posts

Ultimate Geek


  # 1363522 12-Aug-2015 11:14
One person supports this post
Send private message

sbiddle, things changed since a few years ago. New numbers are using the 0, and for this user it's required they have it in.

1246 posts

Uber Geek


  # 1363525 12-Aug-2015 11:23
Send private message

Not sure if this helps you but these are my 2talk settings - the register sting is important should be in the format

number:password@pan.wxnz.net/number






17 posts

Geek


  # 1363546 12-Aug-2015 11:32
Send private message

grudge: Ok, so on that last call attempt, the INVITE we get from you has the following:

From: <sip:9950xxxx@pan.wxnz.net:5070>;


It should be:

From: <sip:09950xxxx@pan.wxnz.net:5070>;

So you are still missing a leading 0 somewhere in your configs.

PS. That's a call at 08:19AM, if you made any more outbounds since, I can't see them.




Hi 

From what I can tell everything I am sending now has a 0 in the line, please let me know if I am wrong.



17 posts

Geek


  # 1363551 12-Aug-2015 11:35
Send private message

nitrotech: Not sure if this helps you but these are my 2talk settings - the register sting is important should be in the format

number:password@pan.wxnz.net/number





Hi 

2 talk is different, I am registering, that is not my problem, it is getting the authentication to dial out.
i can receive calls no problem

 
 
 
 


266 posts

Ultimate Geek


  # 1363590 12-Aug-2015 11:59
Send private message

I still don't see any outgoing call attempts since 8:19AM this morning. Can you check any call traces from your side and see where you are sending the INVITE out?

28266 posts

Uber Geek

Moderator
Trusted
Biddle Corp
Lifetime subscriber

  # 1363615 12-Aug-2015 13:03
One person supports this post
Send private message

nitrotech: Not sure if this helps you but these are my 2talk settings - the register sting is important should be in the format

number:password@pan.wxnz.net/number



This in incorrect. 2talk doesn't use AuthID.

The correct settings are listed above, and also on the sticky post in this thread. There are no issues with these settings.

The OP didn't have correct peer settings (didn't have user= which is the AuthID), and has left the 0 in his number which would cause it to fail.





17 posts

Geek


  # 1364684 12-Aug-2015 14:55
Send private message

Hey Andrei,

I can't believe this but my work mate found the setting on the router was not configured properly, I had personally read the posts about this setting but did not have access to the router to check it, I had figgured it was set as we already had office phones working. However I don't know how. All is good from here so thank you for all your help. Hopefully I will not have the same problems when I take it to site.

266 posts

Ultimate Geek


  # 1365161 13-Aug-2015 07:22
One person supports this post
Send private message

That is good to hear. It's always the network/firewall :)

1 | 2 
Filter this topic showing only the reply marked as answer View this topic in a long page with up to 500 replies per page Create new topic



Twitter and LinkedIn »



Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

Microsoft New Zealand Partner Awards results
Posted 18-Oct-2019 10:18


Logitech introduces new Made for Google keyboard and mouse devices
Posted 16-Oct-2019 13:36


MATTR launches to accelerate decentralised identity
Posted 16-Oct-2019 10:28


Vodafone X-Squad powers up for customers
Posted 16-Oct-2019 08:15


D Link ANZ launches EXO Smart Mesh Wi Fi Routers with McAfee protection
Posted 15-Oct-2019 11:31


Major Japanese retailer partners with smart New Zealand technology IMAGR
Posted 14-Oct-2019 10:29


Ola pioneers one-time passcode feature to fight rideshare fraud
Posted 14-Oct-2019 10:24


Spark Sport new home of NZC matches from 2020
Posted 10-Oct-2019 09:59


Meet Nola, Noel Leeming's new digital employee
Posted 4-Oct-2019 08:07


Registrations for Sprout Accelerator open for 2020 season
Posted 4-Oct-2019 08:02


Teletrac Navman welcomes AI tech leader Jens Meggers as new President
Posted 4-Oct-2019 07:41


Vodafone makes voice of 4G (VoLTE) official
Posted 4-Oct-2019 07:36


2degrees Reaches Milestone of 100,000 Broadband Customers
Posted 1-Oct-2019 09:17


Nokia 1 Plus available in New Zealand from 2nd October
Posted 30-Sep-2019 17:46


Ola integrates Apple Pay as payment method in New Zealand
Posted 25-Sep-2019 09:51



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.


Support Geekzone »

Our community of supporters help make Geekzone possible. Click the button below to join them.

Support Geezone on PressPatron



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.