Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


Filter this topic showing only the reply marked as answer View this topic in a long page with up to 500 replies per page Create new topic
1 | ... | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | ... | 56
218 posts

Master Geek
+1 received by user: 114


  # 1416729 30-Oct-2015 09:59
Send private message

@hio77 

Had a resync last night becuase of getting Central exchange errors. Impulse noise protection has gone to 1 and now getting zero errors. With zero errors latency should switch to fast in a few days ?







Other info
Location Barrington Street, Christchurch. Distance of fritzbox to cabinet 30 Meters Line of sight, House wiring 1940s era Twisted Trurip to from pole forced into a rj45 jackpoint no splitter, nakedVDSL.





1387 posts

Uber Geek
+1 received by user: 134


  # 1416738 30-Oct-2015 10:04
One person supports this post
Send private message

so it seems a lot of ikns cards are doing wonderful download speeds, but upload hasn't gone up much.  and so 17a is now about upload speed more than anything else.

it also looks like a lot of the freshly moved connections have strange interleaving.  i wonder if that'll drop over time.


 
 
 
 


83 posts

Master Geek
+1 received by user: 9

Subscriber

  # 1416948 30-Oct-2015 12:36
Send private message

Very nice jump from 43/10 to 68/12 Mbps overnight, in Rangiora (near Christchurch). 11dB line attenuation; 7dB SNR, which is down from 12dB some months ago. Vigor 130 modem so no fancy graphs for me.

1387 posts

Uber Geek
+1 received by user: 134


  # 1416949 30-Oct-2015 12:39
One person supports this post
Send private message

nickt: Very nice jump from 43/10 to 68/12 Mbps overnight, in Rangiora (near Christchurch). 11dB line attenuation; 7dB SNR, which is down from 12dB some months ago. Vigor 130 modem so no fancy graphs for me.


it'll be 9db vs 12db target, and syncing at quiet time pushing it down to 7db, it's likely to be stable with 7db though.  is vigor broadcom?  dslstats can do graphs on quite a few modems.. 

20182 posts

Uber Geek
+1 received by user: 6173

Trusted
Lifetime subscriber

  # 1416969 30-Oct-2015 13:03
Send private message

Does DSL Stats work on Zyxel 8324?


1387 posts

Uber Geek
+1 received by user: 134


  # 1416971 30-Oct-2015 13:06
Send private message

networkn: Does DSL Stats work on Zyxel 8324?



looks like it does:

http://www.s446074245.websitehome.co.uk/routers.html

83 posts

Master Geek
+1 received by user: 9

Subscriber

  # 1416973 30-Oct-2015 13:10
Send private message

mercutio: it'll be 9db vs 12db target, and syncing at quiet time pushing it down to 7db, it's likely to be stable with 7db though.  is vigor broadcom?  dslstats can do graphs on quite a few modems.. 


Not sure of the chipset, but 'adsl showbins' isn't implemented on the 130 so no way to get the data AFAIK. It also doesn't report Ikonos vs Broadcom at the other end, but I'm just below the downstream rate where it would make any difference anyway.

 
 
 
 


20182 posts

Uber Geek
+1 received by user: 6173

Trusted
Lifetime subscriber

  # 1416974 30-Oct-2015 13:12
Send private message

Very useful. 

DSLAM/MSAN type: IKNS:0x0001 / v0x0001
Modem/router firmware: AnnexA version - A2pv6F039i.d24e
DSL mode: VDSL2 Profile 17a
Status: Showtime
Uptime: 59 min 39 sec
Resyncs: 0 (since 30 Oct 2015 13:09:40)

Downstream Upstream
Line attenuation (dB): 0.0 0.0
Signal attenuation (dB): Not monitored
Connection speed (kbps): 64200 10351
SNR margin (dB): 9.5 26.0
Power (dBm): 14.4 -0.1
Interleave depth: 1 1
INP: 0 0
G.INP: Not enabled

RSCorr/RS (%): N/A 0.0000
RSUnCorr/RS (%): N/A 0.0000
ES/hour: 0 0

Pretty Happy. I believe based on what I have read that I would potentially end up with about 70/20? is that sound right?


1387 posts

Uber Geek
+1 received by user: 134


  # 1416975 30-Oct-2015 13:13
Send private message

networkn: Very useful. 

DSLAM/MSAN type: IKNS:0x0001 / v0x0001
Modem/router firmware: AnnexA version - A2pv6F039i.d24e
DSL mode: VDSL2 Profile 17a
Status: Showtime
Uptime: 59 min 39 sec
Resyncs: 0 (since 30 Oct 2015 13:09:40)

Downstream Upstream
Line attenuation (dB): 0.0 0.0
Signal attenuation (dB): Not monitored
Connection speed (kbps): 64200 10351
SNR margin (dB): 9.5 26.0
Power (dBm): 14.4 -0.1
Interleave depth: 1 1
INP: 0 0
G.INP: Not enabled

RSCorr/RS (%): N/A 0.0000
RSUnCorr/RS (%): N/A 0.0000
ES/hour: 0 0

Pretty Happy. I believe based on what I have read that I would potentially end up with about 70/20? is that sound right?



i'd guess to be more like 70/12 - oh hangon, you're on 17a not 8b.  yeh, probably 20+.  i'm guessing attainable is sitting around 35 megabit atm based on 26db snr margin..


1387 posts

Uber Geek
+1 received by user: 134


  # 1416976 30-Oct-2015 13:16
Send private message

nickt:
mercutio: it'll be 9db vs 12db target, and syncing at quiet time pushing it down to 7db, it's likely to be stable with 7db though.  is vigor broadcom?  dslstats can do graphs on quite a few modems.. 


Not sure of the chipset, but 'adsl showbins' isn't implemented on the 130 so no way to get the data AFAIK. It also doesn't report Ikonos vs Broadcom at the other end, but I'm just below the downstream rate where it would make any difference anyway.


looks like it's lantiq like the fritzboxes.  so it might be posible, but ... how.. 

856 posts

Ultimate Geek
+1 received by user: 125


  # 1417038 30-Oct-2015 14:22
Send private message

nickt:
mercutio: it'll be 9db vs 12db target, and syncing at quiet time pushing it down to 7db, it's likely to be stable with 7db though.  is vigor broadcom?  dslstats can do graphs on quite a few modems.. 


Not sure of the chipset, but 'adsl showbins' isn't implemented on the 130 so no way to get the data AFAIK. It also doesn't report Ikonos vs Broadcom at the other end, but I'm just below the downstream rate where it would make any difference anyway.


Yes it does actually, I've been keeping an eye on mine after quite a sudden slide in sync speeds lately ~15% loss in Downstream, and ~50% loss in Upstream in one sudden overnight (about 2 weeks ago) resync that seems to be quite sticky.

Example:

> adsl status  (or vdsl status)
---------------------- ATU-R Info (hw: annex A, f/w: annex A/B/C) -----------
Running Mode : 8B State : SHOWTIME
DS Actual Rate : 23332000 bps US Actual Rate : 4008000 bps
DS Attainable Rate : 23346432 bps US Attainable Rate : 3730000 bps
DS Path Mode : Interleave US Path Mode : Interleave
DS Interleave Depth : 0 US Interleave Depth : 0
NE Current Attenuation : 21 dB Cur SNR Margin : 11 dB
DS actual PSD : 8. 3 dB US actual PSD : 18. 6 dB
NE CRC Count : 0 FE CRC Count : 0
NE ES Count : 0 FE ES Count : 0
Xdsl Reset Times : 0 Xdsl Link Times : 1
ITU Version[0] : b5004946 ITU Version[1] : 544e0000
VDSL Firmware Version : 05-04-08-00-00-06
Power Management Mode : DSL_G997_PMS_L0
Test Mode : DISABLE
-------------------------------- ATU-C Info ---------------------------------
Far Current Attenuation : 0 dB Far SNR Margin : 11 dB
CO ITU Version[0] : b5004244 CO ITU Version[1] : 434da3f5
DSLAM CHIPSET VENDOR : < BDCM >


Kind of waiting for Power Management mode to show 998 before ringing up Spark and asking if they can see anything on their end, but last line shows Broadcom linecard in the cabinet.  (Strangely, I'm sure this used read Ikonos, but don't think I have any copies of "adsl status" from a while back to refer back to and check).


134 posts

Master Geek
+1 received by user: 5


  # 1417142 30-Oct-2015 16:27
Send private message

Big increase for me in Shirley, Christchurch. From 39/10 to 65/26...woohoo!

83 posts

Master Geek
+1 received by user: 9

Subscriber

  # 1417201 30-Oct-2015 16:58
Send private message

nigelj: mine looks a little different

 

> adsl status

 


  --------------------------- ATU-R Info (hw: annex A, f/w: annex Unknown) -----------
   Running Mode            :  unknown       State                : SHOWTIME
   DS Actual Rate          : 67924000 bps   US Actual Rate       : 12136000 bps
   DS Attainable Rate      :        0 bps   US Attainable Rate   :        0 bps
   DS Path Mode            :        Fast    US Path Mode         :        Fast 
   DS Interleave Depth     :        0       US Interleave Depth  :        0 
   NE Current Attenuation  :       11 dB    Cur SNR Margin       :        7  dB
   DS actual PSD           :   -11.-3 dB    US actual PSD        :    15. 3   dB
   ADSL Firmware Version   : 05-04-08-00-00-06 
  -------------------------------- ATU-C Info ---------------------------------
   Far Current Attenuation :        0 dB    Far SNR Margin       :        8  dB
   CO ITU Version[0]       : 0000534e       CO ITU Version[1]    : 00000100
   DSLAM CHIPSET VENDOR    : < unknown >


What firmware version are you running ?

22145 posts

Uber Geek
+1 received by user: 4726

Trusted
Subscriber

  # 1417207 30-Oct-2015 17:04
Send private message

Still stuck on under 4 meg up on one of my connections here. Stupid router needed a reboot so I lost my good sync from last powercut a few months back.




Richard rich.ms

1387 posts

Uber Geek
+1 received by user: 134


  # 1417237 30-Oct-2015 17:44
Send private message

richms: Still stuck on under 4 meg up on one of my connections here. Stupid router needed a reboot so I lost my good sync from last powercut a few months back.


yeah it always got me how adsl would give like 4 megabit increases in sync rate after power cuts - and vdsl is still giving pretty significant boosts.  i don't think it's just from having quick booting modems - i think in the process of syncing it must have less load?


1 | ... | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | ... | 56
Filter this topic showing only the reply marked as answer View this topic in a long page with up to 500 replies per page Create new topic



Twitter and LinkedIn »



Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

Anyone can broadcast with Kordia Pop Up TV
Posted 13-Jun-2019 10:51


Volvo and Uber present production vehicle ready for self-driving
Posted 13-Jun-2019 10:47


100,000 customers connected to fibre broadband network through Enable
Posted 13-Jun-2019 10:35


5G uptake even faster than expected
Posted 12-Jun-2019 10:01


Xbox showcases 60 anticipated games
Posted 10-Jun-2019 20:24


Trend Micro Turns Public Hotspots into Secure Networks with WiFi Protection for Mobile Devices
Posted 5-Jun-2019 13:24


Bold UK spinoff for beauty software company Flossie
Posted 2-Jun-2019 14:10


Amazon Introduces Echo Show 5
Posted 1-Jun-2019 15:32


Epson launches new 4K Pro-UHD projector technology
Posted 1-Jun-2019 15:26


Lenovo and Qualcomm unveil first 5G PC called Project Limitless
Posted 28-May-2019 20:23


Intel introduces new 10th Gen Intel Core Processors and Project Athena
Posted 28-May-2019 19:28


Orcon first to trial residential 10Gbps broadband
Posted 28-May-2019 11:20


Video game market in New Zealand passes half billion dollar mark
Posted 24-May-2019 16:15


WLG-X festival to celebrate creativity and innovation
Posted 22-May-2019 17:53


HPE to acquire supercomputing leader Cray
Posted 20-May-2019 11:07



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.


Support Geekzone »

Our community of supporters help make Geekzone possible. Click the button below to join them.

Support Geezone on PressPatron



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.