Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


Filter this topic showing only the reply marked as answer View this topic in a long page with up to 500 replies per page Create new topic
1 | ... | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | ... | 56
Lorenceo
904 posts

Ultimate Geek

Trusted

  #1426725 12-Nov-2015 08:58
Send private message

That looks like 997 with the upload limit removed.



sidefx
3711 posts

Uber Geek

Trusted

  #1426738 12-Nov-2015 09:21
Send private message

Shrapz: Is it still possible to drop the SNR on the frizboxes with the new firmware? Was under the impression it wasn't currently possible? 


Not sure.  I'll give it a try once I'm on 998.  If not I still have my old 7340 on the old firmware which I know does work well for SNR tweaking ;-)




"I was born not knowing and have had only a little time to change that here and there."         | Octopus Energy | Sharesies
              - Richard Feynman


hio77
12999 posts

Uber Geek

ID Verified
Trusted
Lizard Networks

  #1426768 12-Nov-2015 10:01
Send private message

gorringS: Looks like our exchange been upgraded
https://www.dropbox.com/s/nb6jvjtdjauygl0/Screenshot%202015-11-12%2006.50.07.png?dl=0
https://www.dropbox.com/s/66v22061vg9lba3/Screenshot%202015-11-12%2006.50.22.png?dl=0
https://www.dropbox.com/s/jl5klxuohtruqzt/Screenshot%202015-11-12%2006.50.32.png?dl=0



i have to agree with Lorenceo here, Your still on 997.. based off the fact that the DSLAM has changed to 70/30 Almost seems like 998 was enabled, but for whatever reason the bandplan itself didn't change.




#include <std_disclaimer>

 

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.

 

 




ElectronicFerret
125 posts

Master Geek


  #1426890 12-Nov-2015 13:29
Send private message

I've got dual bonded lines which have just moved over to 998. The latency has gone up, but I'm told it will drop soon. Distance is 50 metres give or take. Line 1 has been in almost two months longer than Line 2 so I think DLM is still doing it's thing on Line 2.  Stats are off Draytek DV130 modems.

Line 1 - Clothed with POTS

 

---------------------- ATU-R Info (hw: annex A, f/w: annex A/B/C) -----------

 

Running Mode : 17A State : SHOWTIME

 

DS Actual Rate : 95532000 bps US Actual Rate : 34824000 bps

 

DS Attainable Rate :100649728 bps US Attainable Rate : 35063000 bps

 

DS Path Mode : Interleave US Path Mode : Interleave

 

DS Interleave Depth : 0 US Interleave Depth : 0

 

NE Current Attenuation : 11 dB Cur SNR Margin : 8 dB

 

DS actual PSD : -7.-2 dB US actual PSD : 13. 8 dB

 

NE CRC Count : 0 FE CRC Count : 0

 

NE ES Count : 0 FE ES Count : 0

 

Xdsl Reset Times : 0 Xdsl Link Times : 3

 

ITU Version[0] : b5004946 ITU Version[1] : 544e0000

 

VDSL Firmware Version : 05-04-08-00-00-06

 

Power Management Mode : DSL_G997_PMS_L0

 

Test Mode : DISABLE

 

-------------------------------- ATU-C Info ---------------------------------

 

Far Current Attenuation : 0 dB Far SNR Margin : 8 dB

 

CO ITU Version[0] : b5004244 CO ITU Version[1] : 434da3f5

 

DSLAM CHIPSET VENDOR : < BDCM >

 

 

Line 2 - Naked

 

--------------------- ATU-R Info (hw: annex A, f/w: annex A/B/C) -----------

 

Running Mode : 17A State : SHOWTIME

 

DS Actual Rate : 89912000 bps US Actual Rate : 35940000 bps

 

DS Attainable Rate : 94173232 bps US Attainable Rate : 36363000 bps

 

DS Path Mode : Interleave US Path Mode : Interleave

 

DS Interleave Depth : 0 US Interleave Depth : 0

 

NE Current Attenuation : 11 dB Cur SNR Margin : 9 dB

 

DS actual PSD : -7.-3 dB US actual PSD : 13. 8 dB

 

NE CRC Count : 0 FE CRC Count : 0

 

NE ES Count : 0 FE ES Count : 0

 

Xdsl Reset Times : 0 Xdsl Link Times : 3

 

ITU Version[0] : b5004946 ITU Version[1] : 544e0000

 

VDSL Firmware Version : 05-04-08-00-00-06

 

Power Management Mode : DSL_G997_PMS_L0

 

Test Mode : DISABLE

 

-------------------------------- ATU-C Info ---------------------------------

 

Far Current Attenuation : 0 dB Far SNR Margin : 9 dB

 

CO ITU Version[0] : b5004244 CO ITU Version[1] : 434da3f5

 

DSLAM CHIPSET VENDOR : < BDCM >

 


sidefx
3711 posts

Uber Geek

Trusted

  #1426917 12-Nov-2015 14:03
Send private message

ElectronicFerret: Line 1 has been in almost two months longer than Line 2 so I think DLM is still doing it's thing on Line 2.


I seem to recall someone saying that the switch to 998 reset (or appeared to?) and restart the DLM process, at least partially?




"I was born not knowing and have had only a little time to change that here and there."         | Octopus Energy | Sharesies
              - Richard Feynman


Psilan
856 posts

Ultimate Geek


  #1426918 12-Nov-2015 14:04
Send private message

It didn't for me.




Voyager referral - https://refer.voyager.nz/68QKJ8XKK


hio77
12999 posts

Uber Geek

ID Verified
Trusted
Lizard Networks

  #1427032 12-Nov-2015 16:39
Send private message

Thing i only just noticed about your lines, you seem to have the first 9/9dB 17a line i have seen.

Could just be resyncing while noise was low however..




#include <std_disclaimer>

 

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.

 

 


 
 
 
 

Shop now for Lenovo laptops and other devices (affiliate link).
richms
28172 posts

Uber Geek

Trusted
Lifetime subscriber

  #1430071 18-Nov-2015 04:23
Send private message

Well,  its happened. Had to see why the connection was down because amazon echo was complaining about the wifi.



Click to see full size





Richard rich.ms

richms
28172 posts

Uber Geek

Trusted
Lifetime subscriber

  #1430072 18-Nov-2015 04:37
Send private message

And the bigpipe connection is worse



Edit: rebooted routers and they are giving me sensible speeds, but its still really laggy - ping spikes all over the place. Might leave it to see if chorus are still playing with stuff and see how it is in the afternoon.




Richard rich.ms

ech3lon
369 posts

Ultimate Geek

Subscriber

  #1430074 18-Nov-2015 05:48
Send private message

My turn..


Download speed still capped at 70

darylblake
1162 posts

Uber Geek

Trusted

  #1430115 18-Nov-2015 06:48
Send private message

So mine was upgraded last night went from 17/3.5 to 19.2/2.3 I'm just hoping the upstream is still enough to to stream 1080 sky

sidefx
3711 posts

Uber Geek

Trusted

  #1430138 18-Nov-2015 08:10
Send private message

Who do you stream sky to?




"I was born not knowing and have had only a little time to change that here and there."         | Octopus Energy | Sharesies
              - Richard Feynman


  #1430209 18-Nov-2015 09:48
Send private message

@richms

are you sure thats due to the change to 998 and not something else?

hio77
12999 posts

Uber Geek

ID Verified
Trusted
Lizard Networks

  #1430218 18-Nov-2015 10:15
Send private message

Jase2985: @richms

are you sure thats due to the change to 998 and not something else?


based off the changes to his profile, ild say 998 is a good assumption there.

richms:
Edit: rebooted routers and they are giving me sensible speeds, but its still really laggy - ping spikes all over the place. Might leave it to see if chorus are still playing with stuff and see how it is in the afternoon.


You have said its giving sensible speeds, does this mean your line got a bit better since the images you posted...


ech3lon: My turn..


Download speed still capped at 70


Based off the fact that your snrs are above where they should be and where your capping, Your on a Ikanos linecard.

998 profile on this card is capped to 70/30, Which your right on maxing out.


Very nice line.




#include <std_disclaimer>

 

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.

 

 


ech3lon
369 posts

Ultimate Geek

Subscriber

#1430318 18-Nov-2015 13:07
Send private message

hio77:

Based off the fact that your snrs are above where they should be and where your capping, Your on a Ikanos linecard.

998 profile on this card is capped to 70/30, Which your right on maxing out.


Very nice line.


I have no idea what you've said, but yes it's a nice line and good bump for upload speed laughing
We have the cabinet right outside our house.

Now, if someone that holds power-that-be could 'accidentally' change the profile to unlock the 100 mbps down..

1 | ... | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | ... | 56
Filter this topic showing only the reply marked as answer View this topic in a long page with up to 500 replies per page Create new topic





News and reviews »

Air New Zealand Starts AI adoption with OpenAI
Posted 24-Jul-2025 16:00


eero Pro 7 Review
Posted 23-Jul-2025 12:07


BeeStation Plus Review
Posted 21-Jul-2025 14:21


eero Unveils New Wi-Fi 7 Products in New Zealand
Posted 21-Jul-2025 00:01


WiZ Introduces HDMI Sync Box and other Light Devices
Posted 20-Jul-2025 17:32


RedShield Enhances DDoS and Bot Attack Protection
Posted 20-Jul-2025 17:26


Seagate Ships 30TB Drives
Posted 17-Jul-2025 11:24


Oclean AirPump A10 Water Flosser Review
Posted 13-Jul-2025 11:05


Samsung Galaxy Z Fold7: Raising the Bar for Smartphones
Posted 10-Jul-2025 02:01


Samsung Galaxy Z Flip7 Brings New Edge-To-Edge FlexWindow
Posted 10-Jul-2025 02:01


Epson Launches New AM-C550Z WorkForce Enterprise printer
Posted 9-Jul-2025 18:22


Samsung Releases Smart Monitor M9
Posted 9-Jul-2025 17:46


Nearly Half of Older Kiwis Still Write their Passwords on Paper
Posted 9-Jul-2025 08:42


D-Link 4G+ Cat6 Wi-Fi 6 DWR-933M Mobile Hotspot Review
Posted 1-Jul-2025 11:34


Oppo A5 Series Launches With New Levels of Durability
Posted 30-Jun-2025 10:15









Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.