My Bluetooth USB Adapter is a Kensinton one with WIDCOMM software.
My Laptop is Windows XP SP1 with all the hotfixes (SP2).
I can connect via Fax, Dial-Up Networking, PIM, File Transfer... etc... vía bluetooth to my cell phone, but I just can't make the Serial Connection work.
I've been digging in the internet, and I'm surprissed that a lot of people has the same problem. I've been trying all for days. And I just can't make this work.
I created a new Serial Port in the Local Service and match the port with the mroute one. And I created a new Serial Port in Client Application, and match this port to the Serial Port Connection in my Bluetooth places. I still receive the same error:
- Error creating 'Bluetooth Serial Port' connection with device.
- The Bluetooth Serial Port connection failed: Could not connect to the remote device.
The best answer I found on the internet is in these links:
http://homepage.mac.com/mark.allerton/archives/000047.html
and http://www.expansys-usa.com/forumthread.asp?code=ARM-USBBT&thread=20
but none of them worked for me...
I'm tired of unisntalling and installing all the software over and over
I ran the SpyLite debbuging tool, and saved the results in a txt file. There's a part where the communication asks for a disconnection, but I don't know why. ¿Can anyone give me his/her e-mail address in order to send this txt file for analysis?
I'm gonna paste the content of the txt file here. Thank you very much in advance.
00:47:45.458 BTKRNL_SubmitSuspend [0]
00:47:51.457 GKI freeq 0 (0:1) 1 (0:1) 2 (0:0) 3 (0:6) 4 (0:84)
00:47:58.327 BTKRNL_SubmitResume [0]
00:47:58.337 --
00:47:58.337 SENT Command to HCI. Name: HCI_Read_BD_Addr (Hex Code: 0x1009 Param Len: 0)
00:47:58.337 --
00:47:58.347 --
00:47:58.347 RCVD Event from HCI. Name: HCI_Command_Complete (Hex Code: 0x0e Param Len: 10)
00:47:58.347 Parameters
00:47:58.347 Num HCI Cmd Packets : 1 (0x01)
00:47:58.347 Cmd Code : 0x1009 (HCI_Read_BD_Addr)
00:47:58.347 Status : Success (0x00)
00:47:58.347 BD Addr : 00-0c-76-46-15-18
00:47:58.347 --
00:47:58.357 --
00:47:58.357 SENT Command to HCI. Name: HCI_Vendor_Specific_Command (Hex Code: 0xfc00 Param Len: 19)
00:47:58.357 Parameters
00:47:58.357 data : c2 00 00 09 00 00 00 03 70 00 00 be 02 01 00 00
00:47:58.357 0 : 00 00 00
00:47:58.357 --
00:47:58.367 --
00:47:58.367 Error - Unknown HCI event: 255 [0xff] Length: 19
00:47:58.367 data : c2 01 00 09 00 00 00 03 70 00 00 be 02 01 00 00
00:47:58.367 0 : 00 b0 0d
00:47:58.367 --
00:47:58.377 --
00:47:58.377 SENT Command to HCI. Name: HCI_Vendor_Specific_Command (Hex Code: 0xfc00 Param Len: 7)
00:47:58.377 Parameters
00:47:58.377 data : cd 03 00 7c 00 00 00
00:47:58.377 --
00:47:58.457 --
00:47:58.457 SENT Command to HCI. Name: HCI_Vendor_Specific_Command (Hex Code: 0xfc00 Param Len: 19)
00:47:58.457 Parameters
00:47:58.457 data : c2 00 00 10 00 03 00 03 70 00 00 5c 02 08 00 00
00:47:58.457 0 : 00 00 00
00:47:58.457 --
00:47:58.467 --
00:47:58.467 Error - Unknown HCI event: 255 [0xff] Length: 33
00:47:58.467 data : c2 01 00 10 00 03 00 03 70 00 00 5c 02 08 00 00
00:47:58.467 0 : 00 2e 42 46 39 2f 67 77 68 42 66 4d 39 5c 2a 49
00:47:58.467 0 : 6c
00:47:58.467 --
00:47:58.487 BTKRNL_SDPIF - starting search, inx: 0
00:47:58.497 SDP - Originate started
00:47:58.507 L2CA_ConnectReq() PSM: 0x0001
00:47:58.517 L2CA_ConnectReq() BDA: 00-0e-6d-0e-1a-00
00:47:58.527 BTM_InqDbRead: bd addr [000e6d0e1a00]
00:47:58.537 --
00:47:58.537 SENT Command to HCI. Name: HCI_Create_Connection (Hex Code: 0x0405 Param Len: 13)
00:47:58.537 Parameters
00:47:58.537 BD_ADDR of remote device : 00-0e-6d-0e-1a-00
00:47:58.537 Packet Types Supported : 0x0018 ( DM1 DH1 )
00:47:58.537 Page Scan Repetition Mode : 1 (0x01)
00:47:58.537 Page Scan Mode : 0 (0x00)
00:47:58.537 Clock Offset : 37928 (0x9428)
00:47:58.537 Allow Role Switch : 1 (0x01)
00:47:58.537 --
00:47:58.547 L2CAP - L2CA_conn_req() returned CID: 0x008a
00:47:58.557 --
00:47:58.557 RCVD Event from HCI. Name: HCI_Command_Status (Hex Code: 0x0f Param Len: 4)
00:47:58.557 Parameters
00:47:58.557 Status : Success (0x00)
00:47:58.557 Num HCI Cmd Packets : 1 (0x01)
00:47:58.557 Command Opcode : HCI_Create_Connection (0x0405)
00:47:58.557 --
00:47:58.567 SDP_IF - Read Thread Started
00:48:00.089 --
00:48:00.099 RCVD Event from HCI. Name: HCI_Connection_Complete (Hex Code: 0x03 Param Len: 11)
00:48:00.109 Parameters
00:48:00.109 Status : Success (0x00)
00:48:00.109 Connection Handle : 41 (0x0029)
00:48:00.109 BD_ADDR of remote : 00-0e-6d-0e-1a-00
00:48:00.109 Link Type : 1 (0x01)
00:48:00.109 Encryption Mode : 0 (0x00)
00:48:00.109 --
00:48:00.119 Security Manager: btm_sec_connected handle:41 status:0 enc_mode:0
00:48:00.129 btm_sec_execute_procedure: Required:0x80 Flags:0x98 State:0
00:48:00.139 Security Manager: access granted
00:48:00.149 --
00:48:00.149 SENT Command to HCI. Name: HCI_Read_Clock_Offset (Hex Code: 0x041f Param Len: 2)
00:48:00.149 Parameters
00:48:00.149 Connection Handle : 41 (0x0029)
00:48:00.149 --
00:48:00.159 BTKRNL:: btmif_send_to_app:0 evt:3
00:48:00.169 L2CAP - LCID: 0x008a st: CLOSED evt: LOWER_LAYER_CONNECT_CFM
00:48:00.179 Security Manager: l2cap_access_req PSM:1 Handle:41 State:0 Flags:0x90 Required:0x80
00:48:00.189 btm_sec_execute_procedure: Required:0x80 Flags:0x90 State:0
00:48:00.200 Security Manager: Start get name
00:48:00.210 --
00:48:00.210 RCVD Event from HCI. Name: HCI_Command_Status (Hex Code: 0x0f Param Len: 4)
00:48:00.210 Parameters
00:48:00.210 Status : Success (0x00)
00:48:00.210 Num HCI Cmd Packets : 1 (0x01)
00:48:00.210 Command Opcode : HCI_Read_Clock_Offset (0x041f)
00:48:00.210 --
00:48:00.220 --
00:48:00.220 SENT Command to HCI. Name: HCI_Change_Connection_Packet_Type (Hex Code: 0x040f Param Len: 4)
00:48:00.220 Parameters
00:48:00.220 Connection Handle : 41 (0x0029)
00:48:00.220 Packet Type : 0xcc18 ( DM1 DH1 DM3 DH3 DM5 DH5 )
00:48:00.220 --
00:48:00.240 --
00:48:00.250 RCVD Event from HCI. Name: HCI_Read_Clock_Offset_Complete (Hex Code: 0x1c Param Len: 5)
00:48:00.250 Parameters
00:48:00.250 Status : Success (0x00)
00:48:00.250 Connection Handle : 41 (0x0029)
00:48:00.250 Clock Offset : 5156 (0x1424)
00:48:00.250 --
00:48:00.260 BTM_InqDbRead: bd addr [000e6d0e1a00]
00:48:00.270 --
00:48:00.270 RCVD Event from HCI. Name: HCI_Command_Status (Hex Code: 0x0f Param Len: 4)
00:48:00.270 Parameters
00:48:00.270 Status : Success (0x00)
00:48:00.270 Num HCI Cmd Packets : 1 (0x01)
00:48:00.270 Command Opcode : HCI_Change_Connection_Packet_Type (0x040f)
00:48:00.270 --
00:48:00.280 --
00:48:00.280 SENT Command to HCI. Name: HCI_Write_Link_Policy_Settings (Hex Code: 0x080d Param Len: 4)
00:48:00.280 Parameters
00:48:00.280 Connection Handle : 41 (0x0029)
00:48:00.280 Link Policy Settings : 15 (0x000f)
00:48:00.280 --
00:48:00.290 --
00:48:00.290 RCVD Event from HCI. Name: HCI_Connection_Packet_Type_Changed (Hex Code: 0x1d Param Len: 5)
00:48:00.290 Parameters
00:48:00.290 Status : Success (0x00)
00:48:00.290 Connection Handle : 41 (0x0029)
00:48:00.290 Packet Type : 0xcc18 ( DM1 DH1 DM3 DH3 DM5 DH5 )
00:48:00.290 --
00:48:00.300 --
00:48:00.300 RCVD Event from HCI. Name: HCI_Max_Slots_Changed (Hex Code: 0x1b Param Len: 3)
00:48:00.300 Parameters
00:48:00.300 Connection Handle : 41 (0x0029)
00:48:00.300 Max Slots : 5 (0x05)
00:48:00.300 --
00:48:00.310 --
00:48:00.320 RCVD Event from HCI. Name: HCI_Command_Complete (Hex Code: 0x0e Param Len: 6)
00:48:00.320 Parameters
00:48:00.320 Num HCI Cmd Packets : 1 (0x01)
00:48:00.320 Cmd Code : 0x080d (HCI_Write_Link_Policy_Settings)
00:48:00.320 Status : Success (0x00)
00:48:00.320 Connection Handle : 41 (0x0029)
00:48:00.320 --
00:48:00.330 --
00:48:00.330 SENT Command to HCI. Name: HCI_Write_Link_Supervision_Timeout (Hex Code: 0x0c37 Param Len: 4)
00:48:00.330 Parameters
00:48:00.330 Connection Handle : 41 (0x0029)
00:48:00.330 Timeout (625us units) : 32000 (0x7d00)
00:48:00.330 --
00:48:00.350 --
00:48:00.350 RCVD Event from HCI. Name: HCI_Command_Complete (Hex Code: 0x0e Param Len: 6)
00:48:00.350 Parameters
00:48:00.350 Num HCI Cmd Packets : 1 (0x01)
00:48:00.350 Cmd Code : 0x0c37 (HCI_Write_Link_Supervision_Timeout)
00:48:00.350 Status : Success (0x00)
00:48:00.350 Connection Handle : 41 (0x0029)
00:48:00.350 --
00:48:00.360 --
00:48:00.360 SENT Command to HCI. Name: HCI_Remote_Name_Request (Hex Code: 0x0419 Param Len: 10)
00:48:00.360 Parameters
00:48:00.360 BD_ADDR of remote : 00-0e-6d-0e-1a-00
00:48:00.360 Page Scan Repetition Mode : 1 (0x01)
00:48:00.360 Page Scan Mode : 0 (0x00)
00:48:00.360 Clock Offset : 0 (0x0000)
00:48:00.360 --
00:48:00.370 --
00:48:00.370 RCVD Event from HCI. Name: HCI_Command_Status (Hex Code: 0x0f Param Len: 4)
00:48:00.370 Parameters
00:48:00.370 Status : Success (0x00)
00:48:00.370 Num HCI Cmd Packets : 1 (0x01)
00:48:00.370 Command Opcode : HCI_Remote_Name_Request (0x0419)
00:48:00.370 --
00:48:00.390 --
00:48:00.390 RCVD Event from HCI. Name: HCI_Remote_Name_Request_Complete (Hex Code: 0x07 Param Len: 255)
00:48:00.390 Parameters
00:48:00.390 Status : Success (0x00)
00:48:00.390 BD_ADDR of remote : 00-0e-6d-0e-1a-00
00:48:00.390 Name of remote : Nokia 6600 (len: 11)
00:48:00.390 --
00:48:00.400 BTKRNL:: btmif_send_to_app:0 evt:4
00:48:00.410 Security Manager: rmt_name_complete status:0 State:3
00:48:00.420 BTKRNL:: btmif_send_to_app queue 0 event skipped msg type:13
00:48:00.430 btm_sec_execute_procedure: Required:0x80 Flags:0x98 State:0
00:48:00.440 Security Manager: access granted
00:48:00.450 L2CAP - LCID: 0x008a st: ORIG_W4_SEC_COMP evt: SECURITY_COMPLETE
00:48:00.460 --
00:48:00.470 SENT ACL Data to HCI. Handle: 0x029 Boundary: 2 Brdcst: 0 Len: 12 Data: 0x08 0x00 0x01 ...
00:48:00.470 Data:
00:48:00.470 0000: 08 00 01 00 02 01 04 00 01 00 8a 00 ............
00:48:00.470 --
00:48:00.480 L2CAP SENT Command. Name: L2C Connection Request (0x02) ID 0x01, len 4
00:48:00.480 PSM : 0x1
00:48:00.480 Source CID : 0x8a
00:48:00.480 --
00:48:00.500 --
00:48:00.500 RCVD Event from HCI. Name: HCI_Number_Of_Completed_Packets (Hex Code: 0x13 Param Len: 5)
00:48:00.500 Parameters
00:48:00.500 Num Handles : 1 (0x01)
00:48:00.500 Handle [1] : 41 (0x0029)
00:48:00.500 Num Completed Pkts [1] : 1 (0x0001)
00:48:00.500 --
00:48:00.510 --
00:48:00.510 RCVD ACL Data from HCI. Handle: 0x029 Boundary: 2 Brdcst: 0 Len: 16 Data: 0x0c 0x00 0x01 ...
00:48:00.510 Data:
00:48:00.510 0000: 0c 00 01 00 03 01 08 00 7f 00 8a 00 01 00 02 00 ................
00:48:00.510 --
00:48:00.520 L2CAP RECV Command. Name: L2C Connection Response (0x03) ID: 0x01, Len: 8
00:48:00.520 Destination CID : 0x7f
00:48:00.520 Source CID : 0x8a
00:48:00.520 Result : 0x1
00:48:00.520 Status : 0x2
00:48:00.520 --
00:48:00.540 L2CAP - LCID: 0x008a st: W4_L2CAP_CON_RSP evt: PEER_CONNECT_RSP_PND
00:48:00.550 --
00:48:00.560 RCVD Event from HCI. Name: HCI_QoS_Setup_Complete (Hex Code: 0x0d Param Len: 21)
00:48:00.570 Parameters
00:48:00.570 Status : Success (0x00)
00:48:00.570 Connection Handle : 41 (0x0029)
00:48:00.570 Flags (reserved) : 0 (0x00)
00:48:00.570 Service Type : 1 (0x01)
00:48:00.570 Token Rate : 0 (0x00000000)
00:48:00.570 Peak Bandwidth : 0 (0x00000000)
00:48:00.570 Latency : 5000 (0x00001388)
00:48:00.570 Delay Variation : 4294967295 (0xffffffff)
00:48:00.570 --
00:48:00.580 --
00:48:00.580 RCVD ACL Data from HCI. Handle: 0x029 Boundary: 2 Brdcst: 0 Len: 16 Data: 0x0c 0x00 0x01 ...
00:48:00.580 Data:
00:48:00.580 0000: 0c 00 01 00 03 01 08 00 7f 00 8a 00 00 00 00 00 ................
00:48:00.580 --
00:48:00.590 L2CAP RECV Command. Name: L2C Connection Response (0x03) ID: 0x01, Len: 8
00:48:00.590 Destination CID : 0x7f
00:48:00.590 Source CID : 0x8a
00:48:00.590 Result : 0x0
00:48:00.590 Status : 0x0
00:48:00.590 --
00:48:00.600 L2CAP - LCID: 0x008a st: W4_L2CAP_CON_RSP evt: PEER_CONNECT_RSP
00:48:00.610 L2CAP - Calling Connect_Cfm_Cb(), CID: 0x008a, Success
00:48:00.620 L2CA_ConfigReq() CID: 0x008a
00:48:00.630 L2CAP - LCID: 0x008a st: CONFIG evt: UPPER_LAYER_CONFIG_REQ
00:48:00.640 --
00:48:00.640 SENT ACL Data to HCI. Handle: 0x029 Boundary: 2 Brdcst: 0 Len: 20 Data: 0x10 0x00 0x01 ...
00:48:00.640 Data:
00:48:00.640 0000: 10 00 01 00 04 02 0c 00 7f 00 00 00 01 02 4c 06 ..............L.
00:48:00.640 0010: 02 02 ff ff ....
00:48:00.640 --
00:48:00.660 L2CAP SENT Command. Name: L2C Configuration Request (0x04) ID 0x02, len 12
00:48:00.660 Destination CID : 127 (0x007f)
00:48:00.660 Flags (last request) : 0x0000
00:48:00.660 Option type 1 : 4c 06
00:48:00.660 Option type 2 : ff ff
00:48:00.660 --
00:48:00.660 SDP - got conn cnf, sent cfg req, CID: 0x8a
00:48:00.660 --
00:48:00.660 RCVD ACL Data from HCI. Handle: 0x029 Boundary: 2 Brdcst: 0 Len: 12 Data: 0x08 0x00 0x01 ...
00:48:00.660 Data:
00:48:00.660 0000: 08 00 01 00 04 01 04 00 8a 00 00 00 ............
00:48:00.660 --
00:48:00.660 L2CAP RECV Command. Name: L2C Configuration Request (0x04) ID: 0x01, Len: 4
00:48:00.660 Destination CID : 138 (0x008a)
00:48:00.660 Flags (last request) : 0x0000
00:48:00.660 --
00:48:00.660 L2CAP - LCID: 0x008a st: CONFIG evt: PEER_CONFIG_REQ
00:48:00.660 L2CAP - Calling Config_Req_Cb(), CID: 0x008a
00:48:00.660 L2CA_ConfigRsp() CID: 0x008a Result: 0
00:48:00.660 L2CAP - LCID: 0x008a st: CONFIG evt: UPPER_LAYER_CONFIG_RSP
00:48:00.660 --
00:48:00.660 SENT ACL Data to HCI. Handle: 0x029 Boundary: 2 Brdcst: 0 Len: 14 Data: 0x0a 0x00 0x01 ...
00:48:00.660 Data:
00:48:00.660 0000: 0a 00 01 00 05 01 06 00 7f 00 00 00 00 00 ..............
00:48:00.660 --
00:48:00.660 L2CAP SENT Command. Name: L2C Configuration Response (0x05) ID 0x01, len 6
00:48:00.660 Source CID : 127 (0x007f)
00:48:00.660 Flags (last response) : 0x0000
00:48:00.660 Result : 0 (0x0000)
00:48:00.660 --
00:48:00.660 SDP - Rcvd cfg ind, sent cfg cfm, CID: 0x8a
00:48:00.660 --
00:48:00.660 RCVD ACL Data from HCI. Handle: 0x029 Boundary: 2 Brdcst: 0 Len: 22 Data: 0x12 0x00 0x01 ...
00:48:00.660 Data:
00:48:00.660 0000: 12 00 01 00 05 02 0e 00 8a 00 00 00 00 00 01 02 ................
00:48:00.660 0010: a0 02 02 02 ff ff ......
00:48:00.660 --
00:48:00.660 L2CAP RECV Command. Name: L2C Configuration Response (0x05) ID: 0x02, Len: 14
00:48:00.660 Source CID : 138 (0x008a)
00:48:00.660 Flags (last response) : 0x0000
00:48:00.660 Result : 0 (0x0000)
00:48:00.660 Option type 1 : a0 02
00:48:00.660 Option type 2 : ff ff
00:48:00.660 --
00:48:00.660 L2CAP - LCID: 0x008a st: CONFIG evt: PEER_CONFIG_RSP
00:48:00.660 L2CAP - Calling Config_Rsp_Cb(), CID: 0x008a
00:48:00.660 SDP - Rcvd cfg cfm, CID: 0x8a Result: 0
00:48:00.660 --
00:48:00.660 Sent SDP message. PDU Id: SERVICE_SEARCH_REQ (Hex: 0x02) Trans: 0 Param Len: 8
00:48:00.660 Service Search Pattern:
00:48:00.660 Descriptor : Data_Ele_Seq (0x06)
00:48:00.660 Length Code : 5 (In next byte)
00:48:00.660 Length : 3
00:48:00.660 Sequence entry : 1.1
00:48:00.660 Descriptor : UUID (0x03)
00:48:00.660 Length Code : 1 (2 bytes)
00:48:00.660 UUID value : 4353 (0x1101) SERVCLASS_SERIAL_PORT
00:48:00.660 Max Service Record Count : 20 (0x0014)
00:48:00.660 Continuation State Len : 0 (0x00)
00:48:00.660 --
00:48:00.660 L2CA_DataWrite() CID: 0x008a Len: 13
00:48:00.660 L2CAP - LCID: 0x008a st: OPEN evt: UPPER_LAYER_DATA_WRITE
00:48:00.660 --
00:48:00.660 SENT ACL Data to HCI. Handle: 0x029 Boundary: 2 Brdcst: 0 Len: 17 Data: 0x0d 0x00 0x7f ...
00:48:00.660 Data:
00:48:00.660 0000: 0d 00 7f 00 02 00 00 00 08 35 03 19 11 01 00 14 .........5......
00:48:00.660 0010: 00 .
00:48:00.660 --
00:48:00.660 --
00:48:00.660 RCVD ACL Data from HCI. Handle: 0x029 Boundary: 2 Brdcst: 0 Len: 18 Data: 0x0e 0x00 0x8a ...
00:48:00.660 Data:
00:48:00.660 0000: 0e 00 8a 00 03 00 00 00 09 00 01 00 01 00 01 00 ................
00:48:00.660 0010: 17 00 ..
00:48:00.660 --
00:48:00.660 L2CAP - LCID: 0x008a st: OPEN evt: PEER_DATA
00:48:00.660 --
00:48:00.660 Rcvd SDP message. PDU Id: SERVICE_SEARCH_RSP (Hex: 0x03) Trans: 0 Param Len: 9
00:48:00.660 Total Service Record Count : 1 (0x0001)
00:48:00.660 Current Service Record Count : 1 (0x0001)
00:48:00.660 Handle: 0 : 65559 (0x00010017)
00:48:00.660 Continuation State Len : 0 (0x00)
00:48:00.660 --
00:48:00.660 --
00:48:00.660 Sent SDP message. PDU Id: SERVICE_ATTR_REQ (Hex: 0x04) Trans: 1 Param Len: 14
00:48:00.660 Service Record Handle : 65559 (0x00010017)
00:48:00.660 Max Attribute Len : 1596 (0x063c)
00:48:00.660 Descriptor : Data_Ele_Seq (0x06)
00:48:00.660 Length Code : 5 (In next byte)
00:48:00.660 Length : 5
00:48:00.660 Requested Attribute ID List:
00:48:00.660 Sequence entry : 1.1
00:48:00.660 Descriptor : Uint (0x01)
00:48:00.660 Length Code : 2 (4 bytes)
00:48:00.660 UINT value : 65535 (0x0000ffff)
00:48:00.660 Continuation State Len : 0 (0x00)
00:48:00.660 --
00:48:00.660 L2CA_DataWrite() CID: 0x008a Len: 19
00:48:00.660 L2CAP - LCID: 0x008a st: OPEN evt: UPPER_LAYER_DATA_WRITE
00:48:00.660 --
00:48:00.660 SENT ACL Data to HCI. Handle: 0x029 Boundary: 2 Brdcst: 0 Len: 23 Data: 0x13 0x00 0x7f ...
00:48:00.660 Data:
00:48:00.660 0000: 13 00 7f 00 04 00 01 00 0e 00 01 00 17 06 3c 35 ..............<5
00:48:00.660 0010: 05 0a 00 00 ff ff 00 .......
00:48:00.660 --
00:48:00.660 --
00:48:00.660 RCVD ACL Data from HCI. Handle: 0x029 Boundary: 2 Brdcst: 0 Len: 159 Data: 0x9b 0x00 0x8a ...
00:48:00.660 Data:
00:48:00.660 0000: 9b 00 8a 00 05 00 01 00 96 00 93 35 91 09 00 00 ...........5....
00:48:00.660 0010: 0a 00 01 00 17 09 00 01 35 03 19 11 01 09 00 02 ........5.......
00:48:00.660 0020: 0a 00 00 00 09 09 00 04 35 0c 35 03 19 01 00 35 ........5.5....5
00:48:00.660 0030: 05 19 00 03 08 02 09 00 05 35 03 19 10 02 09 00 .........5......
00:48:00.660 0040: 06 35 09 09 65 6e 09 00 6a 09 01 00 09 00 07 0a .5..en..j.......
00:48:00.660 0050: 00 00 04 b0 09 00 08 08 ff 09 01 00 25 15 42 6c ............%.Bl
00:48:00.660 0060: 75 65 74 6f 6f 74 68 20 53 65 72 69 61 6c 20 50 uetooth Serial P
00:48:00.660 0070: 6f 72 74 09 01 01 25 15 42 6c 75 65 74 6f 6f 74 ort...%.Bluetoot
00:48:00.660 0080: 68 20 53 65 72 69 61 6c 20 50 6f 72 74 09 01 02 h Serial Port...
00:48:00.660 0090: 25 0c 53 79 6d 62 69 61 6e 20 4c 74 64 2e 00 %.Symbian Ltd..
00:48:00.660 --
00:48:00.660 L2CAP - LCID: 0x008a st: OPEN evt: PEER_DATA
00:48:00.660 --
00:48:00.660 Rcvd SDP message. PDU Id: SERVICE_ATTR_RSP (Hex: 0x05) Trans: 1 Param Len: 150
00:48:00.660 Attribute List Byte Count : 147 (0x0093)
00:48:00.660 Descriptor : Data_Ele_Seq (0x06)
00:48:00.660 Length Code : 5 (In next byte)
00:48:00.660 Length : 145
00:48:00.660 Sequence entry : 1.1
00:48:00.660 Descriptor : Uint (0x01)
00:48:00.660 Length Code : 1 (2 bytes)
00:48:00.660 UINT value : 0 (0x0000) SERVICE_RECORD_HDL
00:48:00.660 Sequence entry : 1.2
00:48:00.660 Descriptor : Uint (0x01)
00:48:00.660 Length Code : 2 (4 bytes)
00:48:00.660 UINT value : 65559 (0x00010017)
00:48:00.660 Sequence entry : 1.3
00:48:00.660 Descriptor : Uint (0x01)
00:48:00.660 Length Code : 1 (2 bytes)
00:48:00.660 UINT value : 1 (0x0001) SERVICE_CLASS_ID_LIST
00:48:00.660 Sequence entry : 1.4
00:48:00.660 Descriptor : Data_Ele_Seq (0x06)
00:48:00.660 Length Code : 5 (In next byte)
00:48:00.660 Length : 3
00:48:00.660 Sequence entry : 2.1
00:48:00.660 Descriptor : UUID (0x03)
00:48:00.660 Length Code : 1 (2 bytes)
00:48:00.660 UUID value : 4353 (0x1101) SERVCLASS_SERIAL_PORT
00:48:00.660 Sequence entry : 1.5
00:48:00.660 Descriptor : Uint (0x01)
00:48:00.660 Length Code : 1 (2 bytes)
00:48:00.660 UINT value : 2 (0x0002) SERVICE_RECORD_STATE
00:48:00.660 Sequence entry : 1.6
00:48:00.660 Descriptor : Uint (0x01)
00:48:00.660 Length Code : 2 (4 bytes)
00:48:00.660 UINT value : 9 (0x00000009)
00:48:00.660 Sequence entry : 1.7
00:48:00.660 Descriptor : Uint (0x01)
00:48:00.660 Length Code : 1 (2 bytes)
00:48:00.660 UINT value : 4 (0x0004) PROTOCOL_DESC_LIST
00:48:00.660 Sequence entry : 1.8
00:48:00.660 Descriptor : Data_Ele_Seq (0x06)
00:48:00.660 Length Code : 5 (In next byte)
00:48:00.660 Length : 12
00:48:00.660 Sequence entry : 2.1
00:48:00.660 Descriptor : Data_Ele_Seq (0x06)
00:48:00.660 Length Code : 5 (In next byte)
00:48:00.660 Length : 3
00:48:00.660 Sequence entry : 3.1
00:48:00.660 Descriptor : UUID (0x03)
00:48:00.660 Length Code : 1 (2 bytes)
00:48:00.660 UUID value : 256 (0x0100) PROTOCOL_L2CAP
00:48:00.660 Sequence entry : 2.2
00:48:00.660 Descriptor : Data_Ele_Seq (0x06)
00:48:00.660 Length Code : 5 (In next byte)
00:48:00.660 Length : 5
00:48:00.660 Sequence entry : 3.1
00:48:00.660 Descriptor : UUID (0x03)
00:48:00.660 Length Code : 1 (2 bytes)
00:48:00.660 UUID value : 3 (0x0003) PROTOCOL_RFCOMM
00:48:00.660 Sequence entry : 3.2
00:48:00.660 Descriptor : Uint (0x01)
00:48:00.660 Length Code : 0 (1 byte)
00:48:00.660 UINT value : 2 (0x02)
00:48:00.660 Sequence entry : 1.9
00:48:00.660 Descriptor : Uint (0x01)
00:48:00.660 Length Code : 1 (2 bytes)
00:48:00.660 UINT value : 5 (0x0005) BROWSE_GROUP_LIST
00:48:00.660 Sequence entry : 1.10
00:48:00.660 Descriptor : Data_Ele_Seq (0x06)
00:48:00.660 Length Code : 5 (In next byte)
00:48:00.660 Length : 3
00:48:00.660 Sequence entry : 2.1
00:48:00.660 Descriptor : UUID (0x03)
00:48:00.660 Length Code : 1 (2 bytes)
00:48:00.660 UUID value : 4098 (0x1002) SERVCLASS_PUBLIC_BROWSE_GROUP
00:48:00.660 Sequence entry : 1.11
00:48:00.660 Descriptor : Uint (0x01)
00:48:00.660 Length Code : 1 (2 bytes)
00:48:00.660 UINT value : 6 (0x0006) LANGUAGE_BASE_ATTR_ID_LIST
00:48:00.660 Sequence entry : 1.12
00:48:00.660 Descriptor : Data_Ele_Seq (0x06)
00:48:00.660 Length Code : 5 (In next byte)
00:48:00.660 Length : 9
00:48:00.660 Sequence entry : 2.1
00:48:00.660 Descriptor : Uint (0x01)
00:48:00.660 Length Code : 1 (2 bytes)
00:48:00.660 UINT value : 25966 (0x656e)
00:48:00.660 Sequence entry : 2.2
00:48:00.660 Descriptor : Uint (0x01)
00:48:00.660 Length Code : 1 (2 bytes)
00:48:00.660 UINT value : 106 (0x006a)
00:48:00.660 Sequence entry : 2.3
00:48:00.660 Descriptor : Uint (0x01)
00:48:00.660 Length Code : 1 (2 bytes)
00:48:00.660 UINT value : 256 (0x0100) PRIMARY_LANGUAGE_BASE_ID
00:48:00.660 Sequence entry : 1.13
00:48:00.660 Descriptor : Uint (0x01)
00:48:00.660 Length Code : 1 (2 bytes)
00:48:00.660 UINT value : 7 (0x0007) SERVICE_INFO_TIME_TO_LIVE
00:48:00.660 Sequence entry : 1.14
00:48:00.660 Descriptor : Uint (0x01)
00:48:00.660 Length Code : 2 (4 bytes)
00:48:00.660 UINT value : 1200 (0x000004b0)
00:48:00.660 Sequence entry : 1.15
00:48:00.660 Descriptor : Uint (0x01)
00:48:00.660 Length Code : 1 (2 bytes)
00:48:00.660 UINT value : 8 (0x0008) SERVICE_AVAILABILITY
00:48:00.660 Sequence entry : 1.16
00:48:00.660 Descriptor : Uint (0x01)
00:48:00.660 Length Code : 0 (1 byte)
00:48:00.660 UINT value : 255 (0xff)
00:48:00.660 Sequence entry : 1.17
00:48:00.660 Descriptor : Uint (0x01)
00:48:00.660 Length Code : 1 (2 bytes)
00:48:00.660 UINT value : 256 (0x0100) SERVICE_NAME
00:48:00.660 Sequence entry : 1.18
00:48:00.660 Descriptor : Text_Str (0x04)
00:48:00.660 Length Code : 5 (In next byte)
00:48:00.660 Length : 21
00:48:00.660 Text_String value : Bluetooth Serial Port (len: 21)
00:48:00.660 Sequence entry : 1.19
00:48:00.660 Descriptor : Uint (0x01)
00:48:00.660 Length Code : 1 (2 bytes)
00:48:00.660 UINT value : 257 (0x0101) SERVICE_DESCRIPTION
00:48:00.660 Sequence entry : 1.20
00:48:00.660 Descriptor : Text_Str (0x04)
00:48:00.660 Length Code : 5 (In next byte)
00:48:00.660 Length : 21
00:48:00.660 Text_String value : Bluetooth Serial Port (len: 21)
00:48:00.660 Sequence entry : 1.21
00:48:00.660 Descriptor : Uint (0x01)
00:48:00.660 Length Code : 1 (2 bytes)
00:48:00.660 UINT value : 258 (0x0102) PROVIDER_NAME
00:48:00.660 Sequence entry : 1.22
00:48:00.660 Descriptor : Text_Str (0x04)
00:48:00.660 Length Code : 5 (In next byte)
00:48:00.660 Length : 12
00:48:00.660 Text_String value : Symbian Ltd. (len: 12)
00:48:00.660 Continuation State Len : 0 (0x00)
00:48:00.660 --
00:48:00.660 SDP - disconnect CID: 0x8a
00:48:00.660 L2CA_DisconnectReq() CID: 0x008a
00:48:00.660 L2CAP - LCID: 0x008a st: OPEN evt: UPPER_LAYER_DISCONNECT_REQ
00:48:00.660 --
00:48:00.660 SENT ACL Data to HCI. Handle: 0x029 Boundary: 2 Brdcst: 0 Len: 12 Data: 0x08 0x00 0x01 ...
00:48:00.660 Data:
00:48:00.660 0000: 08 00 01 00 06 03 04 00 7f 00 8a 00 ............
00:48:00.660 --
00:48:00.660 L2CAP SENT Command. Name: L2C Disconnection Request (0x06) ID 0x03, len 4
00:48:00.660 Destination CID : 0x7f
00:48:00.660 Source CID : 0x8a
00:48:00.660 --
00:48:00.660 --
00:48:00.660 RCVD ACL Data from HCI. Handle: 0x029 Boundary: 2 Brdcst: 0 Len: 12 Data: 0x08 0x00 0x01 ...
00:48:00.660 Data:
00:48:00.660 0000: 08 00 01 00 07 03 04 00 7f 00 8a 00 ............
00:48:00.660 --
00:48:00.660 L2CAP RECV Command. Name: L2C Disconnection Response (0x07) ID: 0x03, Len: 4
00:48:00.660 Destination CID : 0x7f
00:48:00.660 Source CID : 0x8a
00:48:00.660 --
00:48:00.660 L2CAP - LCID: 0x008a st: W4_L2CAP_DISC_RSP evt: PEER_DISCONNECT_RSP
00:48:00.660 L2CAP - Calling DisconnectCfm_Cb(), CID: 0x008a
00:48:00.660 SDP - Rcvd L2CAP disc cfm, CID: 0x8a
00:48:00.660 BTKRNL_SDPIF - search complete, inx: 0, result: 0
00:48:00.660 SDP_IF - Wait IOCtl returned, Inx: 0 Error: 0x0
00:48:00.660 --
00:48:00.660 RCVD Event from HCI. Name: HCI_Number_Of_Completed_Packets (Hex Code: 0x13 Param Len: 5)
00:48:00.660 Parameters
00:48:00.660 Num Handles : 1 (0x01)
00:48:00.660 Handle [1] : 41 (0x0029)
00:48:00.660 Num Completed Pkts [1] : 1 (0x0001)
00:48:00.660 --
00:48:00.680 --
00:48:00.680 RCVD Event from HCI. Name: HCI_Number_Of_Completed_Packets (Hex Code: 0x13 Param Len: 5)
00:48:00.680 Parameters
00:48:00.680 Num Handles : 1 (0x01)
00:48:00.680 Handle [1] : 41 (0x0029)
00:48:00.680 Num Completed Pkts [1] : 1 (0x0001)
00:48:00.680 --
00:48:00.680 --
00:48:00.680 RCVD Event from HCI. Name: HCI_Number_Of_Completed_Packets (Hex Code: 0x13 Param Len: 5)
00:48:00.680 Parameters
00:48:00.680 Num Handles : 1 (0x01)
00:48:00.680 Handle [1] : 41 (0x0029)
00:48:00.680 Num Completed Pkts [1] : 1 (0x0001)
00:48:00.680 --
00:48:00.700 --
00:48:00.700 RCVD Event from HCI. Name: HCI_Number_Of_Completed_Packets (Hex Code: 0x13 Param Len: 5)
00:48:00.700 Parameters
00:48:00.700 Num Handles : 1 (0x01)
00:48:00.700 Handle [1] : 41 (0x0029)
00:48:00.700 Num Completed Pkts [1] : 1 (0x0001)
00:48:00.700 --
00:48:00.700 --
00:48:00.700 RCVD Event from HCI. Name: HCI_Number_Of_Completed_Packets (Hex Code: 0x13 Param Len: 5)
00:48:00.700 Parameters
00:48:00.700 Num Handles : 1 (0x01)
00:48:00.700 Handle [1] : 41 (0x0029)
00:48:00.700 Num Completed Pkts [1] : 1 (0x0001)
00:48:00.700 --
00:48:00.780 Sending Dicovery Complete: found:1
00:48:00.790 BTM_SetSecurityLevel name: Bluetooth Serial Port
00:48:00.800 CBtSerialApp::Local App: Bluetooth Serial Port Local Port: 10 Remote Service: Bluetooth Serial Port SCN: 2
00:48:00.810 RFCOMM_CreateConnection() called SCN: 2 is_server:0 mtu:660
00:48:00.810 RFCOMM_CreateConnection() BDA: 00:0E:6D:0E:1A:00
00:48:00.810 RFCOMM_CreateConnection() completed result 0 handle 2
00:48:00.810 PORT_AssignCom() Handle:2 PortNumber 10
00:48:00.810 SDP_IF - Read Thread Exit
00:48:00.830 RFCOMM_CreateConnection() called SCN: 2 is_server:0 mtu:660
00:48:00.840 RFCOMM_CreateConnection() BDA: 00-0e-6d-0e-1a-00
00:48:00.860 RFCOMM_CreateConnection dlci:4 signal state:0xb
00:48:00.870 port_open_continue
00:48:00.880 rfc_timer_start - timeout:60
00:48:00.890 rfc_mx_sm_state_idle - evt:6
00:48:00.901 L2CA_ConnectReq() PSM: 0x0003
00:48:00.911 L2CA_ConnectReq() BDA: 00-0e-6d-0e-1a-00
00:48:00.921 L2CAP - LCID: 0x008b st: CLOSED evt: UPPER_LAYER_CONNECT_REQ
00:48:00.931 Security Manager: l2cap_access_req PSM:3 postponed for multiplexer
00:48:00.941 L2CAP - LCID: 0x008b st: CLOSED evt: SECURITY_COMPLETE
00:48:00.951 --
00:48:00.951 SENT ACL Data to HCI. Handle: 0x029 Boundary: 2 Brdcst: 0 Len: 12 Data: 0x08 0x00 0x01 ...
00:48:00.951 Data:
00:48:00.951 0000: 08 00 01 00 02 04 04 00 03 00 8b 00 ............
00:48:00.951 --
00:48:00.961 L2CAP SENT Command. Name: L2C Connection Request (0x02) ID 0x04, len 4
00:48:00.961 PSM : 0x3
00:48:00.961 Source CID : 0x8b
00:48:00.961 --
00:48:00.981 L2CAP - L2CA_conn_req() returned CID: 0x008b
00:48:00.991 PORT_SetEventCallback() handle:2
00:48:01.001 BTKRNLPortAssignCOM Handle 2 COM Port 10
00:48:01.011 --
00:48:01.011 RCVD ACL Data from HCI. Handle: 0x029 Boundary: 2 Brdcst: 0 Len: 16 Data: 0x0c 0x00 0x01 ...
00:48:01.011 Data:
00:48:01.011 0000: 0c 00 01 00 03 04 08 00 80 00 8b 00 01 00 02 00 ................
00:48:01.011 --
00:48:01.021 L2CAP RECV Command. Name: L2C Connection Response (0x03) ID: 0x04, Len: 8
00:48:01.021 Destination CID : 0x80
00:48:01.021 Source CID : 0x8b
00:48:01.021 Result : 0x1
00:48:01.021 Status : 0x2
00:48:01.021 --
00:48:01.031 L2CAP - LCID: 0x008b st: W4_L2CAP_CON_RSP evt: PEER_CONNECT_RSP_PND
00:48:01.041 --
00:48:01.041 RCVD Event from HCI. Name: HCI_Number_Of_Completed_Packets (Hex Code: 0x13 Param Len: 5)
00:48:01.041 Parameters
00:48:01.041 Num Handles : 1 (0x01)
00:48:01.041 Handle [1] : 41 (0x0029)
00:48:01.041 Num Completed Pkts [1] : 1 (0x0001)
00:48:01.041 --
00:48:01.051 --
00:48:01.061 RCVD ACL Data from HCI. Handle: 0x029 Boundary: 2 Brdcst: 0 Len: 16 Data: 0x0c 0x00 0x01 ...
00:48:01.071 Data:
00:48:01.071 0000: 0c 00 01 00 03 04 08 00 80 00 8b 00 00 00 00 00 ................
00:48:01.071 --
00:48:01.081 L2CAP RECV Command. Name: L2C Connection Response (0x03) ID: 0x04, Len: 8
00:48:01.081 Destination CID : 0x80
00:48:01.081 Source CID : 0x8b
00:48:01.081 Result : 0x0
00:48:01.081 Status : 0x0
00:48:01.081 --
00:48:01.091 L2CAP - LCID: 0x008b st: W4_L2CAP_CON_RSP evt: PEER_CONNECT_RSP
00:48:01.111 L2CAP - Calling Connect_Cfm_Cb(), CID: 0x008b, Success
00:48:01.121 rfc_mx_sm_state_wait_conn_cnf - evt:9
00:48:01.131 rfc_mx_send_config_req
00:48:01.141 L2CA_ConfigReq() CID: 0x008b
00:48:01.151 L2CAP - LCID: 0x008b st: CONFIG evt: UPPER_LAYER_CONFIG_REQ
00:48:01.161 --
00:48:01.161 SENT ACL Data to HCI. Handle: 0x029 Boundary: 2 Brdcst: 0 Len: 16 Data: 0x0c 0x00 0x01 ...
00:48:01.161 Data:
00:48:01.161 0000: 0c 00 01 00 04 05 08 00 80 00 00 00 01 02 9b 06 ................
00:48:01.161 --
00:48:01.171 L2CAP SENT Command. Name: L2C Configuration Request (0x04) ID 0x05, len 8
00:48:01.181 Destination CID : 128 (0x0080)
00:48:01.191 Flags (last request) : 0x0000
00:48:01.191 Option type 1 : 9b 06
00:48:01.191 --
00:48:01.211 --
00:48:01.211 RCVD ACL Data from HCI. Handle: 0x029 Boundary: 2 Brdcst: 0 Len: 12 Data: 0x08 0x00 0x01 ...
00:48:01.211 Data:
00:48:01.211 0000: 08 00 01 00 04 02 04 00 8b 00 00 00 ............
00:48:01.211 --
00:48:01.221 L2CAP RECV Command. Name: L2C Configuration Request (0x04) ID: 0x02, Len: 4
00:48:01.221 Destination CID : 139 (0x008b)
00:48:01.221 Flags (last request) : 0x0000
00:48:01.221 --
00:48:01.231 L2CAP - LCID: 0x008b st: CONFIG evt: PEER_CONFIG_REQ
00:48:01.241 L2CAP - Calling Config_Req_Cb(), CID: 0x008b
00:48:01.251 rfc_mx_sm_state_configure - evt:12
00:48:01.261 rfc_mx_conf_ind p_cfg:f895cd3c
00:48:01.271 L2CA_ConfigRsp() CID: 0x008b Result: 0
00:48:01.281 L2CAP - LCID: 0x008b st: CONFIG evt: UPPER_LAYER_CONFIG_RSP
00:48:01.291 --
00:48:01.291 SENT ACL Data to HCI. Handle: 0x029 Boundary: 2 Brdcst: 0 Len: 14 Data: 0x0a 0x00 0x01 ...
00:48:01.291 Data:
00:48:01.291 0000: 0a 00 01 00 05 02 06 00 80 00 00 00 00 00 ..............
00:48:01.291 --
00:48:01.301 L2CAP SENT Command. Name: L2C Configuration Response (0x05) ID 0x02, len 6
00:48:01.301 Source CID : 128 (0x0080)
00:48:01.301 Flags (last response) : 0x0000
00:48:01.301 Result : 0 (0x0000)
00:48:01.301 --
00:48:01.311 --
00:48:01.311 RCVD ACL Data from HCI. Handle: 0x029 Boundary: 2 Brdcst: 0 Len: 18 Data: 0x0e 0x00 0x01 ...
00:48:01.311 Data:
00:48:01.311 0000: 0e 00 01 00 05 05 0a 00 8b 00 00 00 00 00 01 02 ................
00:48:01.311 0010: a0 02 ..
00:48:01.311 --
00:48:01.321 L2CAP RECV Command. Name: L2C Configuration Response (0x05) ID: 0x05, Len: 10
00:48:01.341 Source CID : 139 (0x008b)
00:48:01.351 Flags (last response) : 0x0000
00:48:01.361 Result : 0 (0x0000)
00:48:01.361 Option type 1 : a0 02
00:48:01.361 --
00:48:01.391 L2CAP - LCID: 0x008b st: CONFIG evt: PEER_CONFIG_RSP
00:48:01.401 L2CAP - Calling Config_Rsp_Cb(), CID: 0x008b
00:48:01.401 rfc_mx_sm_state_configure - evt:11
00:48:01.401 rfc_mx_conf_cnf p_cfg:f895cd3c res:0
00:48:01.401 RFCOMM SENT - SABME dlci: 0 [d:0, scn: 0] cr:1 pf:1 len:0
00:48:01.401 L2CA_DataWrite() CID: 0x008b Len: 4
00:48:01.401 L2CAP - LCID: 0x008b st: OPEN evt: UPPER_LAYER_DATA_WRITE
00:48:01.401 --
00:48:01.401 SENT ACL Data to HCI. Handle: 0x029 Boundary: 2 Brdcst: 0 Len: 8 Data: 0x04 0x00 0x80 ...
00:48:01.401 Data:
00:48:01.401 0000: 04 00 80 00 03 3f 01 1c .....?..
00:48:01.401 --
00:48:01.401 --
00:48:01.401 RCVD ACL Data from HCI. Handle: 0x029 Boundary: 2 Brdcst: 0 Len: 8 Data: 0x04 0x00 0x8b ...
00:48:01.401 Data:
00:48:01.401 0000: 04 00 8b 00 03 73 01 d7 .....s..
00:48:01.401 --
00:48:01.401 L2CAP - LCID: 0x008b st: OPEN evt: PEER_DATA
00:48:01.401 RFCOMM RECV - UA dlci: 0 [d:0, scn: 0] cr:1 pf:1 len:0
00:48:01.401 rfc_mx_sm_sabme_wait_ua - evt:1
00:48:01.401 rfc_timer_stop
00:48:01.401 PORT_StartCnf result:0
00:48:01.401 RFCOMM SENT - UIH dlci: 0 [d:0, scn: 0] cr:1 pf:0 len:10
00:48:01.401 Mx Ctrl - PN dlci: 4 [d:0, scn: 2] cr:1 pf:0 len:8
00:48:01.401 DLCI Bits (D) - 0x04
00:48:01.401 Frame Type (I) - Use UIH frames
00:48:01.401 Conv Layer (CL) - 15
00:48:01.401 Priority (P) - 0
00:48:01.401 Ack Timer (T) - 0
00:48:01.401 Max Frame (N1) - 660
00:48:01.401 Num xmits (N2) - 0
00:48:01.401 Win Size (K) - 4
00:48:01.401 L2CA_DataWrite() CID: 0x008b Len: 14
00:48:01.401 L2CAP - LCID: 0x008b st: OPEN evt: UPPER_LAYER_DATA_WRITE
00:48:01.401 --
00:48:01.401 SENT ACL Data to HCI. Handle: 0x029 Boundary: 2 Brdcst: 0 Len: 18 Data: 0x0e 0x00 0x80 ...
00:48:01.401 Data:
00:48:01.401 0000: 0e 00 80 00 03 ef 15 83 11 04 f0 00 00 94 02 00 ................
00:48:01.401 0010: 04 70 .p
00:48:01.401 --
00:48:01.401 rfc_port_timer_start - timeout:60
00:48:01.401 --
00:48:01.401 RCVD ACL Data from HCI. Handle: 0x029 Boundary: 2 Brdcst: 0 Len: 8 Data: 0x04 0x00 0x8b ...
00:48:01.401 Data:
00:48:01.401 0000: 04 00 8b 00 13 1f 01 bc ........
00:48:01.401 --
00:48:01.401 L2CAP - LCID: 0x008b st: OPEN evt: PEER_DATA
00:48:01.401 RFCOMM RECV - DM dlci: 4 [d:0, scn: 2] cr:1 pf:1 len:0
00:48:01.401 rfc_port_closed
00:48:01.401 rfc_port_timer_stop
00:48:01.401 rfc_mx_sm_state_connected - evt:8
00:48:01.401 rfc_timer_start - timeout:3
00:48:01.401 RFCOMM SENT - DISC dlci: 0 [d:0, scn: 0] cr:1 pf:1 len:0
00:48:01.401 L2CA_DataWrite() CID: 0x008b Len: 4
00:48:01.401 L2CAP - LCID: 0x008b st: OPEN evt: UPPER_LAYER_DATA_WRITE
00:48:01.401 --
00:48:01.401 SENT ACL Data to HCI. Handle: 0x029 Boundary: 2 Brdcst: 0 Len: 8 Data: 0x04 0x00 0x80 ...
00:48:01.401 Data:
00:48:01.401 0000: 04 00 80 00 03 53 01 fd .....S..
00:48:01.401 --
00:48:01.401 rfc_port_timer_stop
00:48:01.401 BTKRNLRfcPortMgmtEvent handle:2 status:0x0013
00:48:01.401 port_rfc_closed state:1 sending events:0
00:48:01.401 rfc_port_closed DONE
00:48:01.401 rfc_mx_sm_state_disc_wait_ua - evt:8
00:48:01.401 rfc_port_timer_stop
00:48:01.401 --
00:48:01.401 RCVD ACL Data from HCI. Handle: 0x029 Boundary: 2 Brdcst: 0 Len: 8 Data: 0x04 0x00 0x8b ...
00:48:01.401 Data:
00:48:01.401 0000: 04 00 8b 00 03 73 01 d7 .....s..
00:48:01.401 --
00:48:01.401 L2CAP - LCID: 0x008b st: OPEN evt: PEER_DATA
00:48:01.401 RFCOMM RECV - UA dlci: 0 [d:0, scn: 0] cr:1 pf:1 len:0
00:48:01.401 rfc_mx_sm_state_disc_wait_ua - evt:1
00:48:01.401 L2CA_DisconnectReq() CID: 0x008b
00:48:01.401 L2CAP - LCID: 0x008b st: OPEN evt: UPPER_LAYER_DISCONNECT_REQ
00:48:01.401 --
00:48:01.401 SENT ACL Data to HCI. Handle: 0x029 Boundary: 2 Brdcst: 0 Len: 12 Data: 0x08 0x00 0x01 ...
00:48:01.401 Data:
00:48:01.401 0000: 08 00 01 00 06 06 04 00 80 00 8b 00 ............
00:48:01.401 --
00:48:01.401 L2CAP SENT Command. Name: L2C Disconnection Request (0x06) ID 0x06, len 4
00:48:01.401 Destination CID : 0x80
00:48:01.401 Source CID : 0x8b
00:48:01.401 --
00:48:01.401 rfc_timer_stop
00:48:01.401 --
00:48:01.401 RCVD ACL Data from HCI. Handle: 0x029 Boundary: 2 Brdcst: 0 Len: 12 Data: 0x08 0x00 0x01 ...
00:48:01.401 Data:
00:48:01.401 0000: 08 00 01 00 07 06 04 00 80 00 8b 00 ............
00:48:01.401 --
00:48:01.401 L2CAP RECV Command. Name: L2C Disconnection Response (0x07) ID: 0x06, Len: 4
00:48:01.401 Destination CID : 0x80
00:48:01.401 Source CID : 0x8b
00:48:01.401 --
00:48:01.401 L2CAP - LCID: 0x008b st: W4_L2CAP_DISC_RSP evt: PEER_DISCONNECT_RSP
00:48:01.401 RFC_IF - Read Thread Started - handle: 2
00:48:01.401 --
00:48:01.401 RCVD Event from HCI. Name: HCI_Number_Of_Completed_Packets (Hex Code: 0x13 Param Len: 5)
00:48:01.401 Parameters
00:48:01.401 Num Handles : 1 (0x01)
00:48:01.401 Handle [1] : 41 (0x0029)
00:48:01.401 Num Completed Pkts [1] : 1 (0x0001)
00:48:01.401 --
00:48:01.431 Port Event handle:2: event:0x13 is management:1
00:48:01.431 RFCOMM connection down...
00:48:01.431 CBtSerialApp::~CBtSerialApp
00:48:01.431 RFC_IF - Read Thread Exit - handle: 2
00:48:01.431 --
00:48:01.431 RCVD Event from HCI. Name: HCI_Number_Of_Completed_Packets (Hex Code: 0x13 Param Len: 5)
00:48:01.431 Parameters
00:48:01.431 Num Handles : 1 (0x01)
00:48:01.431 Handle [1] : 41 (0x0029)
00:48:01.431 Num Completed Pkts [1] : 1 (0x0001)
00:48:01.431 --
00:48:01.431 --
00:48:01.431 RCVD Event from HCI. Name: HCI_Number_Of_Completed_Packets (Hex Code: 0x13 Param Len: 5)
00:48:01.431 Parameters
00:48:01.431 Num Handles : 1 (0x01)
00:48:01.431 Handle [1] : 41 (0x0029)
00:48:01.431 Num Completed Pkts [1] : 1 (0x0001)
00:48:01.431 --
00:48:01.431 Get Port event Done handle 2
00:48:01.451 --
00:48:01.451 RCVD Event from HCI. Name: HCI_Number_Of_Completed_Packets (Hex Code: 0x13 Param Len: 5)
00:48:01.451 Parameters
00:48:01.451 Num Handles : 1 (0x01)
00:48:01.451 Handle [1] : 41 (0x0029)
00:48:01.451 Num Completed Pkts [1] : 1 (0x0001)
00:48:01.451 --
00:48:01.451 --
00:48:01.451 RCVD Event from HCI. Name: HCI_Number_Of_Completed_Packets (Hex Code: 0x13 Param Len: 5)
00:48:01.451 Parameters
00:48:01.451 Num Handles : 1 (0x01)
00:48:01.451 Handle [1] : 41 (0x0029)
00:48:01.451 Num Completed Pkts [1] : 1 (0x0001)
00:48:01.451 --
00:48:01.451 --
00:48:01.451 RCVD Event from HCI. Name: HCI_Number_Of_Completed_Packets (Hex Code: 0x13 Param Len: 5)
00:48:01.451 Parameters
00:48:01.451 Num Handles : 1 (0x01)
00:48:01.451 Handle [1] : 41 (0x0029)
00:48:01.451 Num Completed Pkts [1] : 1 (0x0001)
00:48:01.451 --
00:48:02.453 --
00:48:02.453 SENT Command to HCI. Name: HCI_Disconnect (Hex Code: 0x0406 Param Len: 3)
00:48:02.453 Parameters
00:48:02.453 Connection Handle : 41 (0x0029)
00:48:02.453 Reason : 19 (0x13)
00:48:02.453 --
00:48:02.473 --
00:48:02.473 RCVD Event from HCI. Name: HCI_Command_Status (Hex Code: 0x0f Param Len: 4)
00:48:02.473 Parameters
00:48:02.473 Status : Success (0x00)
00:48:02.473 Num HCI Cmd Packets : 1 (0x01)
00:48:02.473 Command Opcode : HCI_Disconnect (0x0406)
00:48:02.473 --
00:48:02.483 --
00:48:02.483 RCVD Event from HCI. Name: HCI_Disconnection_Complete (Hex Code: 0x05 Param Len: 4)
00:48:02.483 Parameters
00:48:02.483 Status : Success (0x00)
00:48:02.483 Connection Handle : 41 (0x0029)
00:48:02.483 Reason : 22 (0x16)
00:48:02.483 --
00:48:02.503 BTKRNL:: btmif_send_to_app:0 evt:3
