Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


DazedNConfused

3 posts

Wannabe Geek


#6842 27-Feb-2006 03:01
Send private message

Hi there, I'm trying to setup a network connection between my Laptop and PC using USB bluetooth dongles, the main aim is to then allow the laptop to share the PC's internet connection. I plan to do this via AnalogX's Proxy application rather than using ICS, for two reasons; firstly I already have a similar setup between two PC's on the network and 192.168.0.1 needs to remain in use for those, secondly I'm using AOL broadband which doesn't allow ICS by default - hence the proxy application.

The problem I'm having is that even when the devices are paired and "connected", they cannot seem to ping each other and the proxy doesn't seem to function. I came across the XP SP2 issue described in other topics, thinking this may be the cause I followed the steps to resolve the problem, and was successful with one of the dongles using widcomm software. Unfortunately the second dongle is some nasty generic piece of eBay junk that was originally used for mobilephone connectivity. It came with XTNDConnect software which I'm loathed to install but unfortunately is the only way to get the drivers on the system, only it doesn't list a generic bluetooth radio device in the device manager after installation, instead it appeared to have some multifunction platform device - so I couldn't follow the steps described to resolve the SP2 issue for that dongle. It does seem to function with the Widcomm software and drivers installed, but unfortunately the bluetooth icon remains red even when the drivers have been replaced and it causes a few issues with functionality such as device detection.

So in short, I'd really appreciate some assistance in finding the driver or at least a functioning driver for the generic dongle, one that will allow me to get the bluetooth functionality up and running without the red icon/license.dat issue and hopefully one step further towards setting up the internet proxy. The dongle has a transcluent blue window in it's casing showing the circuit board within, and is labelled gigaAnt A5731-C. I have actually tried searching for drivers but only found requests for them on the DriverGuide forums. If neccesary I can provide a digital photo of the dongle, should the above serial number not be sufficient.

Create new topic
DazedNConfused

3 posts

Wannabe Geek


  #29409 27-Feb-2006 03:24
Send private message

Quick update, the DriverGuide Toolkit lists the device as Windigo BTM01C2AC Bluetooth Adapter



freitasm
BDFL - Memuneh
79295 posts

Uber Geek

Administrator
ID Verified
Trusted
Geekzone
Lifetime subscriber

#29411 27-Feb-2006 07:35
Send private message

The Widcomm software is licensed on a manufacturer basis and the .inf file used for the installation contains the product codes for which the software is licensed. Simply copying a Widcomm driver and software kit does not mean it will work - hence the Bluetooth icon remaining blue and red instead of blue and white.

I'd simply remove the whole thing and get a new Bluetooth adapter with a software othe than XTNDConnect (or 3COM).

Also, instead of Analog Proxy I'd go for NAT32.





Please support Geekzone by subscribing, or using one of our referral links: Quic Broadband (free setup code: R587125ERQ6VE) | Samsung | AliExpress | Wise | Sharesies | Hatch | GoodSync 


DazedNConfused

3 posts

Wannabe Geek


  #29476 27-Feb-2006 20:04
Send private message

I actually have another bluetooth dongle in the household somewhere which uses the widcomm software and I've been tearing the place up looking for it inbetween posting. I did suspect it would come down to having to use another dongle, the Windigo software and drivers were absolutely horrible, refused to make any sort of connection with the other widcomm dongle, and seemed to be either extremely outdated or manufactured with only mobile phone use in mind. Cheers for the help though, freit.

Create new topic





News and reviews »

Air New Zealand Starts AI adoption with OpenAI
Posted 24-Jul-2025 16:00


eero Pro 7 Review
Posted 23-Jul-2025 12:07


BeeStation Plus Review
Posted 21-Jul-2025 14:21


eero Unveils New Wi-Fi 7 Products in New Zealand
Posted 21-Jul-2025 00:01


WiZ Introduces HDMI Sync Box and other Light Devices
Posted 20-Jul-2025 17:32


RedShield Enhances DDoS and Bot Attack Protection
Posted 20-Jul-2025 17:26


Seagate Ships 30TB Drives
Posted 17-Jul-2025 11:24


Oclean AirPump A10 Water Flosser Review
Posted 13-Jul-2025 11:05


Samsung Galaxy Z Fold7: Raising the Bar for Smartphones
Posted 10-Jul-2025 02:01


Samsung Galaxy Z Flip7 Brings New Edge-To-Edge FlexWindow
Posted 10-Jul-2025 02:01


Epson Launches New AM-C550Z WorkForce Enterprise printer
Posted 9-Jul-2025 18:22


Samsung Releases Smart Monitor M9
Posted 9-Jul-2025 17:46


Nearly Half of Older Kiwis Still Write their Passwords on Paper
Posted 9-Jul-2025 08:42


D-Link 4G+ Cat6 Wi-Fi 6 DWR-933M Mobile Hotspot Review
Posted 1-Jul-2025 11:34


Oppo A5 Series Launches With New Levels of Durability
Posted 30-Jun-2025 10:15









Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.