Orcon ipv6 on Amplifi HD

Forums › 2degrees (including Slingshot, Orcon, Flip, Stuff Fibre, MyRepublic, 2talk and Vocus) › Orcon ipv6 on Amplifi HD

Danielfid96

6 posts

Wannabe Geek

#274532 27-Aug-2020 12:37

Anyone have any luck with ipv6 on Orcon with an Amplfii HD system? I have enabled the ipv6 setting but getting a verify ipv6 error. Located in Wainuiomata, Wellington. ipv6 was previously working with 2Degrees.

tanivula

991 posts

Ultimate Geek

Lifetime subscriber

#2550693 27-Aug-2020 13:49

I don't have an amplify but I do have IPv6 in Porirua on Orcon using a FritzBox. The settings are slightly different to the 2degrees ones from memory. Are you able to post the screenshots of your current settings for IPv6?

Danielfid96

6 posts

Wannabe Geek

#2550732 27-Aug-2020 14:59

The only ipv6 setting is set to on with the DHCPv6 setting rather than 6to4.

michaelmurfy

meow
13244 posts

Uber Geek

Moderator

ID Verified

Trusted

Lifetime subscriber

#2550775 27-Aug-2020 16:10

I think Orcon/Vocus are still in the process of rolling out IPv6. They've got an upgrade "soon" for Wellington to enable it.

Michael Murphy | https://murfy.nz
Referral Links: Quic Broadband (use R122101E7CV7Q for free setup)

Are you happy with what you get from Geekzone? Please consider supporting us by subscribing.
Opinions are my own and not the views of my employer.

tanivula

991 posts

Ultimate Geek

Lifetime subscriber

#2550995 27-Aug-2020 22:18

michaelmurfy:
I think Orcon/Vocus are still in the process of rolling out IPv6. They've got an upgrade "soon" for Wellington to enable it.

Interesting, I wonder how I and others in my area, have v6 connections with Orcon. Possibly via Palmy? Which might explain why speedtest sometimes defaults to one of the palmy ISPs?

Sounddude

I fix stuff!
1928 posts

Uber Geek

Trusted

2degrees

Lifetime subscriber

#2551116 28-Aug-2020 09:11

Orcon has had ipv6 for a while, its the slingshot brand which is only just catching up.

So if you are on Orcon, even on the Wellington BNG, you should have IPV6 - assuming your CPE actually works with IPV6 (many don't seem too)

michaelmurfy

meow
13244 posts

Uber Geek

Moderator

ID Verified

Trusted

Lifetime subscriber

#2551134 28-Aug-2020 09:45

Sounddude:

Orcon has had ipv6 for a while, its the slingshot brand which is only just catching up.

So if you are on Orcon, even on the Wellington BNG, you should have IPV6 - assuming your CPE actually works with IPV6 (many don't seem too)

Ah that's where I got confused - I knew it was one of the two.

If you drop down where it says DHCPv6 is there an option for SLAAC? I can't remember with the AmpliFi.

Danielfid96

6 posts

Wannabe Geek

#2551644 28-Aug-2020 22:29

The only options I have on Amplifi are DHCPv6 or 6to4.