Italk on Nokia mobile?

Forums › 2degrees (including Slingshot, Orcon, Flip, Stuff Fibre, MyRepublic, 2talk and Vocus) › Italk on Nokia mobile?

akuzev

11 posts

Geek

#34708 28-May-2009 22:48

Hi
I have a Nokia N82 which has a SIP client which works great over wi-fi and even Vodafone 3g. Recently I signed for Italk and tried to configure the mobile with the italk service but no luck yet. Does anyone know the settings or is it possible at all to get this working? Any info would be great. Thanks in advance

jmosen

551 posts

Ultimate Geek

Lifetime subscriber

#219134 29-May-2009 08:39

I've not used Italk, but my understanding is it's a little more closed than its sister service 2Talk is, which is also run by CallPlus.

You might like to check the 2Talk help pages where they give very clear instructions as to how to set this up, and then see if you can make the necessary changes for Italk. Or simply switch to 2Talk.

I use 2Talk with my Nokia N82 and its really robust.

Jonathan

richms

28172 posts

Uber Geek

Trusted

Lifetime subscriber

#219636 30-May-2009 02:03

I have used both in the past and it worked fine.

There is a problem with having 2 numbers for the same provider since the phone doesnt let you have 2 users at the one domain - but if you are just configuring one account there shouldnt be a problem.

Richard rich.ms

akuzev

11 posts

Geek

#219678 30-May-2009 09:26

Great. Can you please advise of the settings? I think I'm getting stuck wit the proxy and registrar servers settings. Any info would be great. Thanks for the help.

richms

28172 posts

Uber Geek

Trusted

Lifetime subscriber

#219891 30-May-2009 17:11

Have a look on 2talks site and just substitute 2talk with the right italk server (akl.italk.co.nz was what I had to use) and the number is 649xxxxxxx not 09xxxxxxx

Richard rich.ms

ajobbins

5052 posts

Uber Geek

Trusted

#219899 30-May-2009 17:29

richms: I have used both in the past and it worked fine.

There is a problem with having 2 numbers for the same provider since the phone doesnt let you have 2 users at the one domain - but if you are just configuring one account there shouldnt be a problem.

Leaving the 'Realm' blank fixes this

akuzev

11 posts

Geek

#222846 8-Jun-2009 22:37

Ok. Thanks to all but I'm still stuck i.e. I get registration failed. So I decided to send you my settings and hopefuly someone can help me:

Profile name : Italk
Service profile: IETF
Default access point: My home wireles router
Public user name: 64997xxxxx@akl.italk.co.nz
use compression: no
registration: always on
use security:no

Proxy server: akl.italk.co.nz
Realm: akl.italk.co.nz
username: 64997xxxxx
password: my italk p/w
Allow loose routing : yes
transport type : udp
port: 5060

Registrar server address: akl.italk.co.nz
realm: akl.italk.co.nz
user name: 64997xxxxx
password: my italk p/word
transport type : udp
port: 5060

Seems like all the settings are correct and I still get registration failed/ Does Italk actualy support nokia phones? Any help would be great. Thanks in advance