Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


View this topic in a long page with up to 500 replies per page Create new topic
1 | 2 
sqlpro

516 posts

Ultimate Geek


  #356447 26-Jul-2010 12:36
Send private message

Oh Jaxson, i thought i figured out what i need to look for. Man, its way technical for me.

If you do use the speakers again then look to make sure your new receiver has a microphone setup to compensate for the speakers quirks.

am not sure what that means , how does microphone compensate speakers ?

probably best solution for me is to wait until i get enough money to buy receiver & speaker pack. I hoped there would be some simpler solution to use my existing speakers as they sound so good ! (some of my friends have very expensive models than mine but did not see any great difference when compared with mine).



Jaxson
8042 posts

Uber Geek

Trusted

  #356453 26-Jul-2010 12:43
Send private message

Sorry, didn't mean to confuse.

First up, go and read the ohm rating on the back of the speakers you already have.  If they say 6 or 8ohm you should be fine, if they say 2 or 4 ohm then they are realistically not ideally suited for use with a separate receiver.

2ndly, when you buy your receiver, just check that it comes with a microphone with a really long wire cord on it.  Many new receivers have a mic you plug into the front of the receiver when you first set your system up.  The microphone allows the receiver to 'listen' to the speakers and make any adjustments needed so you get the best out of your speakers.  It's a bonus, especially if you opt to use your existing speakers again, and many new receivers come with this microphone setup feature included.

sqlpro

516 posts

Ultimate Geek


  #356477 26-Jul-2010 13:11
Send private message

Thank you. can you see this image please ? my model no HTS 3105. thanks.

https://cdn.geekzone.co.nz/imagessubs/blog27a1b175b3d519fa7c5fdc901d992607.jpg



Dunnersfella
4086 posts

Uber Geek


  #356493 26-Jul-2010 13:27
Send private message

Your front speakers may be fine for use with a seperate receiver - however I'd still head towards a 'proper' amp / speaker setup if it was my $'s.

Nety
2584 posts

Uber Geek

Retired Mod
Trusted
Lifetime subscriber

  #356557 26-Jul-2010 14:49
Send private message

Very good point on the speakers Jaxson, I had checked when I looked at the manual however I have just found having a double check that in fact only the front speakers are 8ohm. The rest are all 4ohm. Well according to the manual anyway.

Sorry sqlpro but that is a bit of a blow as very few amps are rated for 4ohm speakers. The one you were looking at on TM is rated down to 6ohm. As you say you may have to save up a bit and go for a speaker package as well as the amp.








Media centre PC - Case Silverstone LC16M with 2 X 80mm AcoustiFan DustPROOF, MOBO Gigabyte MA785GT-UD3H, CPU AMD X2 240 under volted, RAM 4 Gig DDR3 1033, HDD 120Gig System/512Gig data, Tuners 2 X Hauppauge HVR-3000, 1 X HVR-2200, Video Palit GT 220, Sound Realtek 886A HD (onboard), Optical LiteOn DH-401S Blue-ray using TotalMedia Theatre Power Corsair VX Series, 450W ATX PSU OS Windows 7 x64

sqlpro

516 posts

Ultimate Geek


  #356558 26-Jul-2010 14:51
Send private message

Thank you all for your advise.

retailman
4 posts

Wannabe Geek


  #356817 26-Jul-2010 22:46
Send private message

Firstly the blu ray issue, dependant on the model of the bluray, some will in fact split the audio signal for you for example the panasonic BD80 will split it upto 7.1 if needed you just go into the audio options within the bluray player menu and findaudio output and change to 5.1 or 7.1 from stereo but if ur plugging into a decent amp make sure the output is set to stereo.
Secondly the TXSR507 amp is a brilliant amp for the money ur paying, with the inclusion of 2 zones at that level of amp, if you can buy 1 for under a grand then uv got a gr8 deal. dont expect it to power high demand cerwin vega speakers or a set of B&W 604s anything with a high input level. Coz thats where it will let you down is the wattage per channel. If you can push ur budget to the TXSR606 or 607 then brilliant this has 175W per channel for a lil extra kick to really nail those neighbours it also has a few lil fruity tech extra aswell.

1 | 2 
View this topic in a long page with up to 500 replies per page Create new topic





News and reviews »

Air New Zealand Starts AI adoption with OpenAI
Posted 24-Jul-2025 16:00


eero Pro 7 Review
Posted 23-Jul-2025 12:07


BeeStation Plus Review
Posted 21-Jul-2025 14:21


eero Unveils New Wi-Fi 7 Products in New Zealand
Posted 21-Jul-2025 00:01


WiZ Introduces HDMI Sync Box and other Light Devices
Posted 20-Jul-2025 17:32


RedShield Enhances DDoS and Bot Attack Protection
Posted 20-Jul-2025 17:26


Seagate Ships 30TB Drives
Posted 17-Jul-2025 11:24


Oclean AirPump A10 Water Flosser Review
Posted 13-Jul-2025 11:05


Samsung Galaxy Z Fold7: Raising the Bar for Smartphones
Posted 10-Jul-2025 02:01


Samsung Galaxy Z Flip7 Brings New Edge-To-Edge FlexWindow
Posted 10-Jul-2025 02:01


Epson Launches New AM-C550Z WorkForce Enterprise printer
Posted 9-Jul-2025 18:22


Samsung Releases Smart Monitor M9
Posted 9-Jul-2025 17:46


Nearly Half of Older Kiwis Still Write their Passwords on Paper
Posted 9-Jul-2025 08:42


D-Link 4G+ Cat6 Wi-Fi 6 DWR-933M Mobile Hotspot Review
Posted 1-Jul-2025 11:34


Oppo A5 Series Launches With New Levels of Durability
Posted 30-Jun-2025 10:15









Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.